BMW Coilovers for BMW 5 Series E60 (2004-2010)

Clear BMW chassis

Coilovers provide more adjustability than a strut and spring setup and can serve a variety of different needs - it's important to be sure of what your suspension goals are. We have broken down our coilover catalog into street and track categories, this is not to say you can't use one of our aEURoestreetaEUR coilovers on the track, or vice versa, but it is to give you a starting point. Are you someone who is interested in getting your BMW lower than factory height for the aesthetic value and handling benefits in a daily driver? Check out our street category. The majority of these are priced to avoid breaking the bank, but providing a good value in terms of features and benefits. On the other hand, if you are putting together your vehicle with the track as its main purpose, take a look at our track coilovers category. We have hand selected these coilover brands as being more expensive coilovers built to hold up to abuse.

Sub-Categories

Coilover Systems (5)

Sort By:

Bilstein B16 DampTronic Coilover Kit - E60 M5

For vehicles with EDC

10X Entries Into Our F80 M3 Sweepstakes

T#:201427

Part#: 49-234923

In Stock at Vendor

31% off MSRP $ 5,345.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,699.00 USD

Add to Wish List

Qty

31% off MSRP

$ 5,345.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,699.00 USD

Add to Wish List

This Bilstein B16 suspension kit allows you to lower your EDC equipped E60 M5 while maintaining all the factory EDC functions. Finally, you can improve the handling of your car will still retaining the ability to choose your suspension stiffness on the fly with the factory EDC system! This suspension kit allows adjustable lowering of the car from 15mm up to 35mm.

The factory BMW EDC (Electronic Damping Control) system uses an electronic control module wired to each shock absorber to vary the stiffness of the shock with a push of a button on the center console. You can leave it in Comfort for around-town running and instantly get a tighter and more responsive suspension for twisty country roads. The Comfort setting is also dynamic - sensing road characteristics and g-forces to instantaneously firm the suspension when you're pushing the car. This is the ultimate E60 suspension!

The basic kit is a Bilstein PSS system with true coil over front struts, rear shocks, four springs, height adjusters that plug directy into the factory EDC system.. The front struts are zinc coated for superior corrosion resistance. The system installs just like a normal suspension and uses the factory original mounts. Installation instructions included but professional installation is strongly recommended. This kit is TUV certified and a limited lifetime warranty.

This coilover kit fits the following BMWs:
2006-2010 E60 BMW M5

Show More Show Less

Bilstein B16 PSS10 Coil Over Suspension - E60 525i/528i/530i/535i/545...

10X Entries Into Our F80 M3 Sweepstakes

T#:1894

Part#: GM5-D549

Special Order: No Guaranteed ETA

$ 2,119.00 USD

Add to Wish List

Qty

$ 2,119.00 USD

Add to Wish List

The B16 PSS10 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality! Bilstein's monotube shock dampers in the PSS10 offer 9 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P9) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob. Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn. The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included. If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS10. It combines all of the best German engineering with real-world development, and a lifetime warranty. Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks. Featuring: Largest available piston diameter for greater sensitivity and precise control. Patented digressive piston head design and deflective valving instantly reacts to changing road conditions. 9-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required. Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life. Weather resistant coating to resist oxidization, and ensure long life. Lighter weight reduces wear and tear on suspension components. Wrenches to adjust front and rear ride height included! This coilover kit fits the following BMWs: 2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i

Show More Show Less

Bilstein B14 PSS Coil-Over Suspension - E60 525i/528i/530i/535i/545i/...

10X Entries Into Our F80 M3 Sweepstakes

T#:12155

Part#: HE5-B116

Ships in 3 Business Days

$ 1,419.00 USD

Add to Wish List

Qty

$ 1,419.00 USD

Add to Wish List

The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs.
The product benefits at a glance:

Threaded body adjustable range of 20 mm
Lowering of approx. 30-50 mm at front and rear
Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
Aluminum Spring plates and lock nuts
Surface coating using Triple-C-Technology for long-lasting corrosion resistance
Round threads for easy adjustment
Quality sport springs made from highly durable material
Gas pressure technology

BILSTEIN monotube technology, made in Germany

adj. -1.0"-1.75" / adj. -1.0"-1.75"

Not for cars with EDC

This coilover kit fits the following BMWs:
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i

Show More Show Less

E60 Non-M Monoball Thrust Arms With Performance Coilovers Purchase ...

T#:22822598

Part#: 029314ECS01DBKT

In Stock

$ 1,974.99 USD

Add to Wish List

Qty

$ 1,974.99 USD

Add to Wish List

Elevate your BMW E60 Non-M RWD driving experience with our meticulously crafted Coilover line, designed for daily drivers seeking a perfect balance of performance and comfort. These coilovers, akin to top-tier counterparts, offer a smooth, stock-like feel while enhancing the aesthetics, handling, and performance at an unbeatable value.

Key Features:

Performance Coilover System:
- Sport-tuned, height, damping, and body adjustable suspension
- High-quality materials for improved performance
- Perfect ride height for optimal appearance
- Spring Rates: Front 12kg/mm, Rear 8kg/mm

Performance Features:

32 levels of rebound damping adjustment
Monotube shocks/struts with progressive rate coil springs for road-sticking grip
Lowered ride height improves handling with a lower center of gravity
Adjustable front bodies maintain ride height and correct spring pre-load
Adjustable front and rear bodies ensure the shock operates in the correct valving range, regardless of ride height

Product Design:

Durable gloss black powder-coated strut and shock bodies
Clear zinc-coated threaded portions for optimal corrosion protection
Reflex Silver Metallic powder-coated coil springs for durability
Red anodized, billet aluminum lower spring seats with locking collars for on-the-car adjustability
Integrated bump stops for added protection

Free Upgrade - Turner Motorsport Upgraded Thrust Arm With Pre-installed Monoball Bushings:

Combat the common issues of weak front thrust arm bushings in BMWs with our free Turner Motorsport upgrade. Offering superior durability and nearly instantaneous cornering and braking response.

Features:

Ball Joint / Monoball:
- OEM BMW sealed, greased ball joint for exceptional durability
Housing:
- 6061-T6 anodized housing for excellent corrosion resistance
- Proprietary Turner designed knurled OD for a perfect fit among different thrust arm bore diameters
Bearing Inserts:
- CNC machined 304ss for a precision fit between the ball joint and the subframe
Performance:
- Nearly instantaneous, crisp steering and braking response
- Maintenance-free, long-lasting performance
- Improved road feel without undesirable NVH

Transform your ride into an exceptional driving experience with these essential upgrades suitable for both street and track enthusiasts.

Show More Show Less

B12 Pro-Kit Suspension System - E60 525/530

For vehicles without electronic or self leveling suspension

10X Entries Into Our F80 M3 Sweepstakes

T#:346258

Part#: 46-181190

Special Order: No Guaranteed ETA

$ 1,139.00 USD

Add to Wish List

Qty

$ 1,139.00 USD

Add to Wish List

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling.

Project Cars

SELECT YOUR BMW

BMW Coilovers for BMW 5 Series E60 (2004-2010)

Sub-Categories

Bilstein B16 DampTronic Coilover Kit - E60 M5

Bilstein B16 PSS10 Coil Over Suspension - E60 525i/528i/530i/535i/545...

Bilstein B14 PSS Coil-Over Suspension - E60 525i/528i/530i/535i/545i/...

E60 Non-M Monoball Thrust Arms With Performance Coilovers Purchase ...

Key Features:

Performance Features:

Product Design:

Free Upgrade - Turner Motorsport Upgraded Thrust Arm With Pre-installed Monoball Bushings:

Features:

B12 Pro-Kit Suspension System - E60 525/530

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results