BMW Intake Parts for BMW 5 Series E60 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

BMS Replacement DCI Filters - Red
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:38890884
Part#: BMS-N54-DCIR-R
In Stock
$ 79.00 USD
Free Shipping on orders $49 and up
High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.
Show More Show Less
Burger Motorsport 4 BAR TMAP Sensor & Adapter - BMW N55/N54/S55 (2007...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:34885402
Part#: 4BAR TMAP
In Stock
$ 139.99 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi.
BMS Replacement DCI Filters - Blue
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:38890886
Part#: BMS-N54-DCIR-B
In Stock
$ 89.00 USD
Free Shipping on orders $49 and up
High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.
Show More Show Less

Replacement N55 Performance Filter - Red (No Hardware)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:38890883
Part#: BMSREPAFNFFR
In Stock
$ 70.00 USD
Free Shipping on orders $49 and up
Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants
Show More Show Less

Burger Motorsports 2007-2012 TypeA 4BAR Adapter - E82/88 E9X E6X N54 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:599636
Part#: TYPEA4BARADAPTER
Ships in 2 Business Days
$ 35.00 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716
Show More Show Less
BMS High Flow Silicone Inlets - 2" Opening For Hybrid Turbos - BMW N5...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:14684349
Part#: N54HFSILINLETS
Ships on Jul 28, 2026
$ 229.00 USD
Free Shipping on orders $49 and up
These high-quality BMS N54 silicone inlets replace your flimsy and restrictive plastic N54 BMW inlets reducing restriction and dramatically improving airflow, top-end boost, and performance. Includes all required hardware and is compatible with both factory-style diverter valves and blow-off valve kits. Available in 1.75" inlets for factory turbos or 2" inlets for hybrid and aftermarket turbos. Compatible with BMS DCI and all other N54 intake systems. FEATURES AND BENEFITS Huge 30-50whp top-end power gains Replaces your restrictive factory intake system Retains OEM engine bay look Durable high-temperature reinforced silicone for long life Compatible with both RHD and LHD vehicles Includes required hardware
Show More Show Less

BMS Replacement DCI Filters - White
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:38890885
Part#: BMS-N54-DCIR-W
Ships on Jul 28, 2026
$ 84.00 USD
Free Shipping on orders $49 and up
High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.
Show More Show Less
Replacement Intake Coupler - Priced Each
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:583384
Part#: INTAKECOUPLER
In Stock
$ 15.00 USD
Free Shipping on orders $49 and up

BMW N54 BOV Vaccuum Adapter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:589530
Part#: N54BOVVACADPT
Ships on Jul 28, 2026
$ 59.00 USD
Free Shipping on orders $49 and up

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:20815185
Part#: BMSWMITC
In Stock
$ 59.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA
Show More Show Less
1 Gallon Methanol Tank - Clear/White
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:558165
Part#: 1G-MT-CL
Ships in 3 Business Days
$ 30.00 USD
Free Shipping on orders $49 and up
The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less
BMS DDP5800 Water/Methanol Injection Pump
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:20815186
Part#: BMSDDP5800
Ships in 1 Business Day
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.
Show More Show Less


2 Gallon Low Profile Universal Methanol Tank
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:20946755
Part#: 2G-ULPMT
In Stock
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"
Show More Show Less
1.25 Gallon Heavy-Duty Universal Methanol Tank
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:20946761
Part#: 1.25G-UMT-CL
Ships on Jul 28, 2026
$ 69.00 USD
Free Shipping on orders $49 and up
This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 ​Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less
Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:558163
Part#: BMS-WMI
Ships on Jul 28, 2026
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!
Show More Show Less

Water/Methanol Injection Hose - 20'
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:21176944
Part#: BMS-WMI-IL
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:21176934
Part#: BMS-WMI-SOL
Ships on Jul 28, 2026
$ 75.00 USD
Free Shipping on orders $49 and up
This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.
Show More Show Less
WMI Inline Filter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:21176933
Part#: BMS-WMI-FIL
Ships on Jul 28, 2026
$ 15.00 USD
Free Shipping on orders $49 and up
This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.
Show More Show Less

Super Atomizing Water/Methanol Injection Nozzles
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:20815192
Part#: BMS.SA.WMI.NOZ
Ships on Aug 10, 2026
Starting at $ 40.00 USD
Free Shipping on orders $49 and up
Starting at $ 40.00 USD
Free Shipping on orders $49 and up
With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! ​Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.
Show More Show Less