VTT is proud to offer our “OBD-LOCK” OBD port locking tool. This is tool is made from billet 6061-T6 aluminum and is designed to completely lock out your OBD port from being accessed. This is useful for people who do not want dealers, techs, etc from accessing their OBD port, and possibly changing a tune, etc. This is also perfect for anti-theft prevention as it will not allow a would-be thief to hook up to the car’s OBD port, duplicate a key, etc. The OBD-LOCK cannot be removed without physically destroying the OBD port if you do not have the proper tools. VTT uses 5 types of screw head designs for every 200 OBD-LOCKS made. This means that worldwide only 40 OBD-LOCKS are using the same head design. For each batch of 200, we redesign the screw heads meaning every batch of 200 OBD-LOCKS will use different screw heads and tools. Each OBD-LOCK sent has its head design chosen at random. After Extensive testing, we have found that our OBD lock fits EVERY SINGLE OBD port we have tried, this means it will fit every single OBD port currently on the market from a high-end BMW to a Ford F150 diesel.
Show More Show Less
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less
VTT is proud to offer Titanium wheel stud kits for the vehicle owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. VTT kit details are as follows: Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength Grade 5 Titanium nuts with 60-degree cone seat to fit most all aftermarket wheel applications M5 Hex for easy installation Three Colors Available – Raw, Black, Burnt M14x1.25x75mm on the small end to M14x1.5 on the long end. This will convert M14x1.25 cars into M14x1.5 pattern Installation notes: Apply locktite to the studs (short end) and torque to 20 ft/lb. Lug nuts should be torqued to factory specifications. For safety retorque all hardware (studs and nuts) after 25-50 miles.
Show More Show Less
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less
These are made from 100% Pre-Preg Carbon Fiber for a perfect fit. The carbon fiber gives it just the right look to add to your performance vehicle! Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features Stop your Dragy from flying off the dash and having to search for it Position your Dragy in the optimal position for the best satellite coverage VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite The charging port is not blocked and can be accessed with the cover on
Show More Show Less
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less
These are made from molded plastic for a perfect fit. Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features Stop your Dragy from flying off the dash and having to search for it Position your Dragy in the optimal position for the best satellite coverage VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite The charging port is not blocked and can be accessed with the cover on
Show More Show Less
This new rebuilt turbocharger unit utilizes Vargas Turbo's 30+ years of experience to offer a superior quality performance rebuild. Utilizing all-new internals to stock OEM specifications, the housings are carefully machined to accept custom-machined billet compressor wheels. Not only are these a superior choice for rebuilt turbos, they offer a substantial savings over OEM. Rebuilt stock turbos to handle up to 800 WHP Housings machined to accept custom-machined billet compressor wheels All-new internals to exacting stock specifications Includes $1300 refundable core charge Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost-effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.
Show More Show Less
The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.
Show More Show Less
