BMW E90 M3 S65 4.0L

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Spec-D Tuning - Corporate Logo
T#:14684330
Part#: 2LHPE9005SMG2RS
In Stock
$ 456.99 USD
$ 456.99 USD
Brand new in original box Comes with (1) pair of dual projector headlights in matte black housing, smoke lens, and amber reflector Sequential turn signal function 3D Iced style dynamic LED strip with breathing light effect (Will be activated when parking light is activated) H7 high beam bulbs & H7 low beam bulbs are included Made by an ISO certified manufacturer using materials that meet strict OEM requirements Professional installation is highly recommended
Show More Show Less
E90 / E92 / E93 EKP PNP Cooler Kit - (3 Series)
A Must For Cars With Upgraded LPFPs
Arc Terminator - Corporate Logo
T#:26271821
Part#: E9X-EKP-PNP
Ships in 1 Business Day
Starting at $ 44.99 USD
Free Shipping on orders $49 and up
Starting at $ 44.99 USD
Free Shipping on orders $49 and up
This fully plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E9X BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. Please note that if you have an HW06 + (Slim EKPM3), you must choose the HW06 option, as the pre-HW06 housings will not fit. If you have an M3, you must choose an EKPM2 style cooler since the EKP Module has the same physical dimensions as an EKPM2. Installation Tips: https://arcterminator.com/pages/e90-e92-e93-ekp-cooler-install-instructions We recommend using Fuse #8 (2007+ E9X), which is the cigarette lighter fuse to power this. It is a 20 amp fuse, which you will just need to pull out and put into the empty slot of the fuse holder that comes with the kit. Then you'll need to put that fuse holder into the now empty #8 fuse slot. This ensures that the fan will only turn on when the ignition in the car is turned on. You'll also need trim removal tools, as well as a 10mm socket to remove and re-install the EKP module. We recommend using the stock grounding point that's above the EKP module or the EKP module's mounting points as the ground. The ring terminal with the kit will fit either location. The whole installation should take you between 30 - 45 minutes. The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature. Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With 5015 Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 8x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse
Show More Show Less
Arc Terminator - Corporate Logo
T#:26404814
Part#: SILENT-E90-EKP
Ships in 1 Business Day
Starting at $ 59.99 USD
Free Shipping on orders $49 and up
Starting at $ 59.99 USD
Free Shipping on orders $49 and up
The full plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E9X BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. Please note that if you have an HW06 + (Slim EKPM3), you must choose the HW06 option, as the pre-HW06 housings will not fit. Installation Tips: https://arcterminator.com/pages/e90-e92-e93-ekp-cooler-install-instructions We recommend using Fuse #8 (2007+ E9X), which is the cigarette lighter fuse to power this. It is a 20 amp fuse, which you will just need to pull out and put it into the empty slot of the fuse holder that comes with the kit. Then you'll need to put that fuse holder into the now empty #8 fuse slot. This ensures that the fan will only turn on when the ignition in the car is turned on. You'll also need trim removal tools, as well as a 10mm socket to remove and re-install the EKP module. We recommend using the stock grounding point that's above the EKP module or the EKP module's mounting points as the ground. The ring terminal with the kit will fit either location. The whole installation should take you between 30 - 45 minutes. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable ASA, ABS, or PETG. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With a Genuine Noctua 60mm or 40mm Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 8x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a silent Noctua fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
Show More Show Less

Spec-D Tuning - Corporate Logo
T#:6827874
Part#: LTE9005BKLEDTM
Ships in 8 Business Days
$ 376.99 USD
Free Shipping
$ 376.99 USD
Free Shipping
Made by an ISO certified manufacturer using materials that meet strict OEM requirements! Comes with 1 pair of jet black housing clear lens tail lights w/ LED strips

Black Forest Industries - Corporate Logo
T#:391722
Part#: GS2B
Ships on Dec 3, 2026
Starting at $ 184.99 USD
Free Shipping
Starting at $ 184.99 USD
Free Shipping

This weighted shift knob makes shifts faster and the extra-large globe shape encourages over-palm shifting. The Black Forest Industries Billet Knob weighs in at 8.8oz (250g), about twice as much as a stock knob and a little heaver than the BMW ZHP knob. The heavier knob amplifies the pendulum motion of the shift lever resulting in smoother and faster shift times. BFI has designed this knob for BMW and VW fitments to fit snug on the shift lever and be secured with Allen set screws. They were careful to reduce tolerances compared to universal knobs. The overall height of the BFI knob is the same as stock anatomic knobs (some BMW M/Performance models have a stock knob that is shorter than this one).

Included with the BFI Billet knob is a matching BFI crest shift emblem. A 5 or 6-speed pattern emblem is available separately.

Choose from soft alcantara or perforated air leather with either a silver or black anodized base.

Show More Show Less
Spec-D Tuning - Corporate Logo
T#:14684331
Part#: 2LHPE9005G2RS
Ships in 2 Business Days
$ 417.99 USD
$ 417.99 USD
Brand new in original box Comes with (1) pair of dual projector headlights in matte black housing, smoke lens, and amber reflector Sequential turn signal function 3D Iced style dynamic LED strip with breathing light effect (Will be activated when parking light is activated) H7 high beam bulbs & H7 low beam bulbs are included Made by an ISO certified manufacturer using materials that meet strict OEM requirements Professional installation is highly recommended
Show More Show Less

Black Forest Industries - Corporate Logo
T#:31158762
Part#: WBFI77-E88-501
In Stock
$ 229.99 USD
Free Shipping on orders $49 and up

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

  • Provide a polished, high-quality look by covering the open center hole
  • Are machined from 6061-T5611 aluminum for superior strength and durability
  • Feature a hand-brushed finish for a seamless OEM appearance
  • Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
  • Are sold in sets of four, with center caps not included
Show More Show Less
Spec-D Tuning - Corporate Logo
T#:6827873
Part#: LTE9005GLEDTM
Ships in 8 Business Days
$ 334.99 USD
Free Shipping
$ 334.99 USD
Free Shipping
Made by an ISO certified manufacturer using materials that meet strict OEM requirements! All LED wiring for the tail lights is pre-assembled for the essential plug & play application

Spec-D Tuning - Corporate Logo
T#:6827876
Part#: LTE9005JMLEDTM
Ships in 8 Business Days
$ 384.99 USD
$ 384.99 USD
Made by an ISO certified manufacturer using materials that meet strict OEM requirements! Comes with 1 pair of black housing clear lens tail lights w/ LED strips

Arc Terminator - Corporate Logo
T#:26471635
Part#: E9X-C-F-C
In Stock
$ 19.99 USD
Free Shipping on orders $49 and up
Our cabin filter covers are designed to prevent the ingress of water into your cabin and prolong the life of your cabin filters after you've removed your wiper cowl or are using BMS-style cabin filters. These are designed to fit all E9X's and all E8X's (E90, E91, E92, E93, E81, E82, E88, E87) that are using a wiper cowl delete kit or are using TMS-style cabin filters. These filter covers are made in-house by using weatherproof PETG that receives an additional layer of protection from clear coating them with UV proof and weatherproof clear coat paint.
Show More Show Less
Arc Terminator - Corporate Logo
T#:26638202
Part#: E9X-C-F-CRED
In Stock
$ 19.99 USD
Free Shipping on orders $49 and up
Our cabin filter covers are designed to prevent the ingress of water into your cabin and prolong the life of your cabin filters after you've removed your wiper cowl or are using BMS-style cabin filters. These are designed to fit all E9X's and all E8X's (E90, E91, E92, E93, E81, E82, E88, E87) that are using a wiper cowl delete kit or are using TMS-style cabin filters. These filter covers are made in-house by using weatherproof PETG that receives an additional layer of protection from clear coating them with UV proof and weatherproof clear coat paint.
Show More Show Less
Spec-D Tuning - Corporate Logo
T#:6827871
Part#: LTE9005RGLEDTM
Ships in 8 Business Days
$ 384.99 USD
$ 384.99 USD

BMW E90 Pre LCI LED Tail Lights - Chrome Housing/Red & Smoke Lens provide an exceptional upgrade for the rear of your BMW E90, combining stylish design with enhanced visibility. These tail lights are designed to deliver superior illumination and a modern look while maintaining high-quality standards.

  • Brand New in Original Box: Ensures the product arrives in pristine condition, ready for installation.
  • Complete Set: Includes one pair of chrome housing tail lights with red and smoke lenses, featuring integrated LED strips for a sleek appearance.
  • Plug & Play Installation: All LED wiring is pre-assembled, facilitating an easy and straightforward installation process.
  • Enhanced Visibility: Equipped with 921 reverse light bulbs to improve rearward visibility.
  • High-Quality Materials: Manufactured by an ISO certified company, adhering to strict OEM standards for durability and performance.
  • Professional Installation Recommended: For best results and optimal performance, professional installation is advised.

Upgrade your BMW E90 with these LED tail lights to enhance both the aesthetics and functionality of your vehicle's rear end.

Show More Show Less


Arc Terminator - Corporate Logo
T#:26638201
Part#: E9X-C-F-CBLU
In Stock
$ 19.99 USD
Free Shipping on orders $49 and up
Our cabin filter covers are designed to prevent the ingress of water into your cabin and prolong the life of your cabin filters after you've removed your wiper cowl or are using BMS-style cabin filters. These are designed to fit all E9X's and all E8X's (E90, E91, E92, E93, E81, E82, E88, E87) that are using a wiper cowl delete kit or are using TMS-style cabin filters. These filter covers are made in-house by using weatherproof PETG that receives an additional layer of protection from clear coating them with UV proof and weatherproof clear coat paint.
Show More Show Less
Black Forest Industries - Corporate Logo
T#:50934274
Part#: GS1-BMW-ALC
Ships on Oct 30, 2026
$ 174.99 USD
Free Shipping on orders $49 and up
Elevate your M-Performance interior with the Black Forest Industries GS1 Alcantara Edition.
Black Forest Industries - Corporate Logo
T#:50934271
Part#: GS1-70101-2
Ships on Oct 30, 2026
$ 164.99 USD
Free Shipping on orders $49 and up
The BFI GS1 is the perfect upgrade for the BMW enthusiast who demands better tactile feedback.

Black Forest Industries - Corporate Logo
T#:50934281
Part#: GS2-70102-1
Ships on Oct 30, 2026
$ 184.99 USD
Free Shipping on orders $49 and up
Precision meets bold design.

Black Forest Industries - Corporate Logo
T#:50934279
Part#: GS2-70101-4
Ships on Oct 30, 2026
$ 184.99 USD
Free Shipping on orders $49 and up
Precision meets prestige with the Black Forest Industries GS2 Knob.
Black Forest Industries - Corporate Logo
T#:50934276
Part#: GS2-70101-2
Ships on Oct 30, 2026
$ 184.99 USD
Free Shipping on orders $49 and up
The Black Forest Industries GS2 is the ideal choice for the BMW owner who demands both style and substance.

Black Forest Industries - Corporate Logo
T#:50934269
Part#: BFI-BMW-TRANS-01
Ships on Oct 30, 2026
$ 69.99 USD
Free Shipping on orders $49 and up
This kit is a "must-have" for any E36, E46, or E9X owner looking to tighten up their drivetrain's foundation and ensure long-term mechanical reliability.
Black Forest Industries - Corporate Logo
T#:50934280
Part#: GS2-70101-5
Ships on Oct 30, 2026
$ 184.99 USD
Free Shipping on orders $49 and up
The GS2 utilizes a solid billet aluminum core to provide a dense, mechanical connection to your transmission.

Black Forest Industries - Corporate Logo
T#:50934273
Part#: GS1-70101-4
Ships on Oct 30, 2026
$ 164.99 USD
Free Shipping on orders $49 and up
The Black Forest Industries GS1 shift knob is engineered specifically for the BMW driver who wants a more mechanical connection to their transmission.

Black Forest Industries - Corporate Logo
T#:50934282
Part#: GS2-70103-1
Ships on Oct 30, 2026
$ 184.99 USD
Free Shipping on orders $49 and up
This Blue and Silver combination looks incredible in cars with the "M" tri-color stitching on the steering wheel, highlighting the blue thread perfectly.
Black Forest Industries - Corporate Logo
T#:50899204
Part#: BFI-906-LUG
Ships on Oct 30, 2026
$ 4.99 USD
Free Shipping on orders $49 and up
Specifically engineered for vehicles utilizing a wheel stud conversion.
Black Forest Industries - Corporate Logo
T#:50934283
Part#: GSA-70101-2
Ships on Oct 30, 2026
$ 199.99 USD
Free Shipping on orders $49 and up
$ 199.99 USD
Free Shipping on orders $49 and up
Modernize your BMW’s interior with the Black Forest Industries GS2 Automatic shift knob.


Black Forest Industries - Corporate Logo
T#:50934829
Part#: GSA-70101-5
Ships on Oct 30, 2026
$ 199.99 USD
Free Shipping on orders $49 and up
$ 199.99 USD
Free Shipping on orders $49 and up
Offers a clean, streamlined aesthetic that mimics a traditional manual performance knob.
Black Forest Industries - Corporate Logo
T#:50934678
Part#: GSA-70101-4
Ships on Oct 30, 2026
$ 199.99 USD
Free Shipping on orders $49 and up
$ 199.99 USD
Free Shipping on orders $49 and up
Modernize your cockpit with the Black Forest Industries GS2 Automatic shift knob.