BMW Exterior Trim, Body Parts, Aero and Styling for BMW E90 M3 S65 4.0L

CNC Billet License Plate Bracket

T#:27105150

Part#: RE.061

In Stock

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.

Show More Show Less

E9X M3 GT4-style Carbon Fiber Front Splitter (With Brake Ducts) ...

T#:341313

Part#: E9XM3CFFTLIP

Ships in 5 Business Days

$ 630.00

This product was last offered at the strikethrough price on
08-12-2026

$ 450.00 USD

Add to Wish List

Qty

$ 450.00 USD

Add to Wish List

Looking for that last piece to complete your car? Or maybe you're looking for the first piece to truly change the looks of your car. Whatever the case may be, we have what your looking for. With this GT4 inspired front lip, you can drastically change the looks of your car. It is sure to turn heads and give you the satisfaction of have something special. This is just the part your looking for to make your ride unique while portraying that race inspiration. For installation on Non-M Cars, the ECS M3 Style front bumper is required. -Non-M Fitment: Front lip will fit from end to end on bumper instead of having a 1 inch gap on either side like the M3

Show More Show Less

E9X M3 Carbon Fiber Dive Canards

T#:29798943

Part#: E9XM3CANARDS

Ships in 5 Business Days

$ 140.00 USD

Add to Wish List

Qty

$ 140.00 USD

Add to Wish List

E9X M3 Carbon Fiber Dive Canards Transform your BMW M3's look and performance with the E9X M3 Carbon Fiber Dive Canards. These canards epitomize aggressive design and enhanced aerodynamics, meticulously crafted from premium carbon fiber. They are engineered to boost downforce and stability, seamlessly complementing the sleek, dynamic lines of your vehicle. Precision-engineered for a flawless fit, these dive canards blend perfectly with the front bumper, imparting a distinctive, race-inspired appearance to your M3. Their lightweight construction not only enhances performance but also ensures durability and longevity, making them the perfect choice for enthusiasts who seek the best for their ride. Featuring a sleek, aerodynamic profile, the E9X M3 Carbon Fiber Dive Canards deliver both visual appeal and tangible performance benefits on both road and track. Upgrade your M3's aesthetics and driving experience with these finely crafted carbon fiber dive canards, and enjoy a new level of excitement and confidence behind the wheel.

Show More Show Less

Suvneer European Front Bumper - Without PDC - BMW E9X M3

For vehicles without headlight washers or PDC

T#:376240

Part#: E9XM3FTREP

Back Ordered

$ 764.99

This product was last offered at the strikethrough price on
06-13-2026

$ 495.00 USD

Add to Wish List

Qty

$ 495.00 USD

Add to Wish List

For BMW enthusiasts seeking a cleaner, more streamlined front-end design, Suvneer offers the ideal solution – the European-style front bumper. Designed to meticulous quality standards, this bumper is engineered for a perfect fit, delivering a sleek and polished look that rivals the OEM, all while offering significant cost savings.

Show More Show Less

E9X M3 GT4-style Carbon Fiber Front Splitter

T#:340242

Part#: E92CFFTLIP

Ships in 5 Business Days

$ 630.00

This product was last offered at the strikethrough price on
08-13-2026

Starting at $ 450.00 USD

Add to Wish List

Starting at $ 450.00 USD

Add to Wish List

A homage to the original BMW front lip seen on the E92 M3 GT4 and our Frozen Gray M3 Project Car, this front splitter is both beautiful and fully functional as it adds substantial downforce to the front end of the E90 & E92 chassis M3. It is designed and engineered to mate perfectly with the stock M3 front bumper and it is a direct bolt-on item for ANY 2008-2012 BMW M3.

Made of fiberglass with a carbon fiber skin, front splitter includes fully functional brake duct openings for maximum cooling. Aerodynamically the splitter helps to direct air around the sides which reduces lift and increases downforce.

This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Show More Show Less

Suvneer R1 Style Carbon Fiber Front Lip - BMW E9X M3

T#:51285671

Part#: E9XM3R1CFLIP

Ships in 5 Business Days

$ 375.00 USD

Add to Wish List

Qty

$ 375.00 USD

Add to Wish List

The Suvneer E9X M3 R1 Style Front Lip is a functional aerodynamic component engineered to improve front-axle stability.

GTS Designed E9X M3 Carbon Fiber Front Lip

T#:57086673

Part#: E9XM3GTSCFLIP

Back Ordered

$ 330.00 USD

Add to Wish List

Qty

$ 330.00 USD

Add to Wish List

Elevate your E9X M3’s front end aero with this GTS Designed Carbon Fiber Front Lip. Inspired by BMW’s legendary M3 GTS, this piece brings styling and functional downforce to your factory front bumper.

Show More Show Less

Suvneer Exotic Designed Carbon Fiber Front Splitter - E9X M3 (Without...

T#:388262

Part#: E92M3EXOCFLIP

Back Ordered

$ 449.99

This product was last offered at the strikethrough price on
08-18-2026

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Reinforced fiber polymer finished with Gloss Carbon Coating. Perfect fit for E9X M3.

Suvneer CSL Carbon Fiber Trunk - E90 LCI

T#:8061331

Part#: E90CSLTRK-LCI

Back Ordered

$ 1,158.00 USD

Add to Wish List

Qty

$ 1,158.00 USD

Add to Wish List

Give your BMW that gorgeous carbon fiber look with this new CSL Style Carbon Fiber Trunk Lid for the E90! This lid will give your vehicle that brilliant CSL look that is sought after by millions. This part accepts all of the factory hardware and lights and fitment is of a level you would expect for a carbon fiber part on your BMW. Once in place, your vehicle will look stunning. This part accepts all of the factory hardware and lights and fitment is of a level you would expect for a carbon fiber part on your BMW. However, imperfections in this hand-laid carbon fiber part from manufacturing or handling should be expected and is best suited to be painted before installation; however, those tolerant of such imperfections may consider leaving their trunk unpainted. This trunk is designed for LCI models but can be used as an upgrade for pre-LCI cars to convert to the LCI rear look!

Show More Show Less

GTS Designed V2 Carbon Fiber Front Lip - E9X M3

T#:16907162

Part#: E9XM3GTSCFLIPV2

Ships in 5 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

Bring true motorsport lineage to your E9X M3. Modeled after the iconic M3 GTS, the V2 Carbon Fiber Front Lip delivers high speed stability and a razor sharp front end profile engineered to make a statement on the track or the street.

Show More Show Less

Suvneer European Front Bumper - With PDC - BMW E9X M3

For vehicles without headlight washers and with PDC

T#:342534

Part#: E9XM3FTREP-PDC

Ships in 5 Business Days

$ 533.99

This product was last offered at the strikethrough price on
07-27-2026

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

For BMW enthusiasts seeking a cleaner, more streamlined front-end design, Suvneer offers the ideal solution – the European-style front bumper. Designed to meticulous quality standards, this bumper is engineered for a perfect fit, delivering a sleek and polished look that rivals the OEM, all while offering significant cost savings.

Show More Show Less

BMW E90 Pre-LCI Carbon Fiber M-Tech Lip

T#:31191906

Part#: E90MT3DCFLIP

Back Ordered

$ 576.99 USD

Add to Wish List

Qty

$ 576.99 USD

Add to Wish List

BMW E90 Pre-LCI Carbon Fiber M-Tech Lip is a premium upgrade designed to enhance the aerodynamic and aesthetic appeal of the 2005-2008 BMW E90/E91 Pre-LCI M Sport 3 Series Sedan and Wagon. Crafted from high-quality carbon fiber, this front lip adds a sleek, sporty look to the vehicle while improving downforce and stability at higher speeds.

Enhanced Aerodynamics: Improves vehicle stability and downforce, contributing to better high-speed performance.
Sleek Carbon Fiber Finish: Adds a sporty and aggressive appearance with its high-quality carbon fiber construction.
Perfect Fitment: Designed specifically for the 2005-2008 BMW E90/E91 Pre-LCI M Sport 3 Series Sedan and Wagon, ensuring a seamless integration.
Durable Construction: Made from high-strength carbon fiber for durability and longevity.
Easy Installation: Directly replaces the factory front lip with minimal modifications required.

Turner Motorsport offers this carbon fiber lip as a stylish and functional enhancement for BMW enthusiasts seeking to upgrade their vehicle’s appearance and performance.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Exterior Trim, Body Parts, Aero and Styling for BMW E90 M3 S65 4.0L

Sub-Categories

CNC Billet License Plate Bracket

E9X M3 GT4-style Carbon Fiber Front Splitter (With Brake Ducts) ...

E9X M3 Carbon Fiber Dive Canards

Suvneer European Front Bumper - Without PDC - BMW E9X M3

E9X M3 GT4-style Carbon Fiber Front Splitter

Suvneer R1 Style Carbon Fiber Front Lip - BMW E9X M3

GTS Designed E9X M3 Carbon Fiber Front Lip

Suvneer Exotic Designed Carbon Fiber Front Splitter - E9X M3 (Without...

Suvneer CSL Carbon Fiber Trunk - E90 LCI

GTS Designed V2 Carbon Fiber Front Lip - E9X M3

Suvneer European Front Bumper - With PDC - BMW E9X M3

BMW E90 Pre-LCI Carbon Fiber M-Tech Lip

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results