Big brakes are one of the best improvements you can make if you take your BMW to the track. Also, if you have increased power levels a big brake kit will offer phenomenal confidence when it comes to bringing all that mass to a halt. Turner offers many different brands and styles to meet your exact specifications and goals.
Looking to make your E/F Series BMW faster in the 1/4 mile or 1/2 mile racing? Want to run 17' or 15' wheels s in the front? Want to drop OVER 62lbs of unsprung weight off the front of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimate Front Drag kit for the E/F Series BMWs. This kit will allow you to run the wheel/tire combo you need to drop your ET’s all while putting the car on a significant diet over the stock front brake set up. The kit is a true plug-and-play kit using Genuine Wilwood parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor. This kit comes in 2 different variations, with two different caliper Options for each. We HIGHLY suggest 6-Piston Calipers for street driving, and 1/2 mile racing. These calipers will drop weight, AND be a braking upgrade over stock calipers. PLEASE NOTE: E SERIES WILL ALLOW 15' WHEELS ON THE FRONT WITH NO MODIFICATIONS. CAREFUL SELECTION OF OFFSET WILL BE NEEDED TO CLEAR THE INBOARD STRUT, TOO MUCH NEGATIVE OFFSET WILL NOT CLEAR WITHOUT SPACERS. This kit comes in 2 different variations, with two different caliper sizes for each HD Version: Normal street driving, and racing duties Wilwood Spec 37 HD rotors Genuine Wilwood Dyna-Pro Calipers Genuine Wilwood BP-20 Brake Pads DOT Approved Brake lines VTT CNC Rotor Hats VTT CNC Brackets Brake Sensor CEL ELiminator harness Race Version: Recommended Race Duties only, not for street use Genuine Wilwood Ultra-Lite Scalloped rotors Genuine Wilwood Dyna-Lite Calipers Genuine Wilwood BP-20 Brake Pads DOT Approved Brake lines VTT CNC Rotor Hats VTT CNC Brackets Brake Sensor CEL ELiminator harness Weight saving information VTT Dragkit vs OEM Per Side: OEM Steel kit 46lbs per side – Total 84 lbs VTT HD Kit Spec 37 Rotors- 16.1 Lbs per side – 30.3 Lbs total – 53.7 Lbs savings over Stock steel kit VTT Scalloped kit – 10.7 Lbs per side – 21.4 Lbs total – 62.6 Lbs savings over Stock steel kit!!! More weight information: HD Rotor Spec 37- 9 Lbs Scalloped Rotor – 5.1 Lbs Dyna Lite Caliper 3.2 Lbs DynaPro Caliper 3.6Lbs DynoPro 6 Piston Caliper 5.1 Lbs Rotor Hat 1Lb Pads (one side) 1.0 Lbs Disclaimer: The HD kits are designed for street use, and drag racing. Never use for heavy braking racing environments such as Auto-X or Road Racing. Scalloped kits should never be used for street driving, and are ONE-PASS COOLDOWN DRAG RACING ONLY, EVEN IN THIS ENVIRONMENT, THEY MAY CRACK IF USED TOO AGGRESSIVELY. Always drive within your limits!
Show More Show Less
The VTT Ultimate Front Drag Brake Kit is the definitive solution for BMW E-Series owners looking to shed serious weight and improve their ETs at the drag strip.
The VTT Ultimate Front Drag Brake Kit is the definitive solution for E-Series BMW owners looking to shave seconds off their ETs in 1/4 and 1/2-mile racing.
The Dinan by Brembo brake conversion offers the ultimate in stopping power for the most demanding driving enthusiast. Extensive testing on the street and at the track has enabled the folks with Dinan and Brembo to develop a custom system that has been tuned for optimum performance while avoiding some of the typical downfalls that are associated with "big brake kits," such as unbalanced proportioning, poor pedal feel and unacceptable noise levels. Dinan's custom brake pads and kits have been specially designed for use with the BMW brake wear sensors to keep the safety system fully functional something that is lost in competitors' kits. For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Other Features Include: Large 380mm rotors with aluminum hats (Stock rotors measure 350mm) Massive stopping power 4-Piston aluminum calipers Goodridge DOT/TUV approved stainless steel brake lines included All mounting brackets and assembly hardware included Works with BMW brake wear sensors Dinan-spec brake pads with sensor provision included Less brake fade during heavy use High quality finish with DINAN logo Looks great especially with larger wheels
Show More Show Less
The Dinan by Brembo brake conversion offers the ultimate in stopping power for the most demanding driving enthusiast. Extensive testing on the street and at the track has enabled the folks with Dinan and Brembo to develop a custom system that has been tuned for optimum performance while avoiding some of the typical downfalls that are associated with "big brake kits," such as unbalanced proportioning, poor pedal feel and unacceptable noise levels. Dinan's custom brake pads and kits have been specially designed for use with the BMW brake wear sensors to keep the safety system fully functional something that is lost in competitors' kits. For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Other Features Include: Large 380mm rotors with aluminum hats (Stock rotors measure 360mm) Massive stopping power 6-Piston mono-block aluminum calipers Goodridge DOT/TUV approved stainless steel brake lines included All mounting brackets and assembly hardware included Works with BMW brake wear sensors Dinan-spec brake pads with sensor provision included Less brake fade during heavy use High quality finish with DINAN logo Looks great especially with larger wheels
Show More Show Less
