Home
Suspension

BMW Suspension Parts for BMW E90 M3 S65 4.0L

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Performance Polyurethane Differential Bushing Set - E9X M3

10X Entries Into Our F80 M3 Sweepstakes

T#:596679

Part#: 026711ECS09

In Stock

Sale - Save 5% $ 177.99

This product was last offered at the strikethrough price on
06-14-2026

$ 169.09 USD

Add to Wish List

Qty

Sale - Save 5%

$ 177.99

This product was last offered at the strikethrough price on
06-14-2026

$ 169.09 USD

Add to Wish List

Upgrade your worn rubber bushings with ECS Tuning's Performance Polyurethane Differential Bushing Set. In-House Engineered to improve power delivery and handling, with a superior service life over the soft factory rubber bushings.

Show More Show Less

E82/E9X Rear Lower Aluminum Trailing Arms (Pair)

10X Entries Into Our F80 M3 Sweepstakes

T#:363261

Part#: 001258ECS01

In Stock

Sale - Save 25% $ 397.99

This product was last offered at the strikethrough price on
06-13-2026

$ 298.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 397.99

This product was last offered at the strikethrough price on
06-13-2026

$ 298.49 USD

Add to Wish List

The rear lower control arms on E82/E9X models are the weakest link in the rear suspension. The arm is made from folded sheetmetal and it bends and deforms easily. Not only will it deform from potholes and curbs, tow truck drivers love to hook onto them without realizing how weak they are. We have seen other race teams complete the box section to make them stronger. A bent arm will throw off the geometry in the suspension, potentially affecting handling and tire wear. These aluminum arms are both lighter and stronger than the factory sheetmetal arms and is the best solution for chronic bending of the stock arm. These are a direct replacement to your stock arms with no changes needed to your alignment. New high-grade hardware is included.

Note: the stock arm is designed from the factory to be intentionally weak. These arms will bend so that something else in the suspension does not break. Our race cars used the stock sheetmetal arm but we replaced them often. We found that it was better to finish a race with a bent arm than not finish due to a catastrophic failure. The ECS arms are still designed to be the weakest link but are far stronger than the factory arm and will not bend as easily.

This item fits the following BMWs:

2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335i 335xi M3 - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi M3 - Coupe
2007-2013 E93 BMW 328i 335i 335is M3 - Convertible

Show More Show Less

Polyurethane Subframe Bushings - 95A - E90 E91 E92 E93 E82 E88 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:638054

Part#: 005686LA01KT

In Stock

Sale - Save 5% $ 286.99

This product was last offered at the strikethrough price on
06-14-2026

$ 272.64 USD

Add to Wish List

Qty

Sale - Save 5%

$ 286.99

This product was last offered at the strikethrough price on
06-14-2026

$ 272.64 USD

Add to Wish List

ECS Polyurethane Subframe bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Featuring 95A durometer polyurethane, ECS Polyurethane Subframe bushings are 25% stiffer than street bushings. Engineered to perform, ECS Polyurethane Subframe bushings offer a supreme level of control, while still maintaining enough comfort for the street. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure.

Key Benefits:

95A Polyurethane isolator reduces unwanted drivetrain movement while still allowing for an aggressive yet streetable driving experience.

Polyurethane bushings reduce subframe bushing deflection versus stock rubber bushings while keeping vibrations associated with such modification to a minimum.

Poly formulation and durometer, profile, and loaded surface area designed to minimize stress concentrations to stay within acceptable compressive strain limits of the material

Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) ECS Polyurethane Subframe bushings were engineered to provide a balance of control while making ride quality more responsive, yet still streetable. As a factory bushings age, they become brittle and begin to harden and crack. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Show More Show Less

KMAC Stage 3 Track Front Adjustable Camber/Caster Plates - E39 540/M5...

T#:389662

Part#: 193616-3L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i (for cars with EDC)
1999-2003 E39 BMW M5
1995-2001 E38 BMW 740i 740il 750il (for cars with EDC)
2004-2010 E60 BMW M5
2004-2011 E63 BMW M6

Show More Show Less

Adjustable Rear Upper/Inner Camber Bushings

T#:600206

Part#: 193926-3H

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves

Show More Show Less

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E39...

T#:389317

Part#: 193616-2L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Bearing: PTFE-lined pillow-ball with thin polyurethane bushing

The Stage 2 KMAC plates are a mixed street/track camber/caster plate meant to be used in a variety of suspensions. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions. Bearing inserts and adapters included. The Stage 2 camber plates are shorter than a factory mount so may not be suitable for cars will little suspension travel. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2006-2008 E85 BMW Z4 M Roadster M Coupe

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW E90 M3 S65 4.0L

Sub-Categories

Performance Polyurethane Differential Bushing Set - E9X M3

E82/E9X Rear Lower Aluminum Trailing Arms (Pair)

Polyurethane Subframe Bushings - 95A - E90 E91 E92 E93 E82 E88 ...

KMAC Stage 3 Track Front Adjustable Camber/Caster Plates - E39 540/M5...

Adjustable Rear Upper/Inner Camber Bushings

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E39...

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results