BMW Suspension Parts for BMW E90 M3 S65 4.0L

AST 5200 Series Coilovers - E9X M3

T#:24643799

Part#: RIV-B1603SD

Back Ordered

$ 6,010.00 USD

Add to Wish List

Qty

$ 6,010.00 USD

Add to Wish List

AST 5300 Series Coilovers - E9X M3

T#:24643800

Part#: RAC-B1603SD

Back Ordered

10% off MSRP $ 8,410.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7,569.00 USD

Add to Wish List

Qty

10% off MSRP

$ 8,410.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7,569.00 USD

Add to Wish List

OEM TRW Front Right Control Arm - E82 1 M Coupe, E9X M3

T#:304215

Part#: 31102283578

In Stock

$ 145.99

This product was last offered at the strikethrough price on
04-28-2026

$ 105.99 USD

Add to Wish List

Qty

$ 105.99 USD

Add to Wish List

Improve your BMW's driving experience by addressing the wear and tear caused by years on the road. The suspension takes a beating from pot holes, speed bumps, and road hazards, leading to a weakened and sloppy feel. Enhance safety and ride comfort by replacing worn components, such as the control arm.

Improved driving experience and ride comfort
Enhanced safety through the replacement of worn suspension components
Non-serviceable ball joints and other components addressed for prolonged lifespan
Control arm replacement for a better feel and handling
Recommended replacement in pairs for optimal performance
Suitable for both front and rear suspension upgrades
Referred to as a wishbone by BMW
Performance upgrade for non-M3 models, recommended to replace in pairs due to heavy-duty nature

Show More Show Less

OEM TRW Front Left Control Arm - E82 1 M Coupe, E9X M3

T#:304217

Part#: 31102283577

In Stock

42% off MSRP $ 171.03

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

Qty

42% off MSRP

$ 171.03

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

Enhance your driving experience with our premium suspension upgrade for your BMW. Over time, the road can take a toll on your suspension, leading to a sloppy and weak feel while driving. Our solution? Replace the control arm – a critical component that, after years of service, may wear out. Boost safety and ride comfort with this easy upgrade.

Improved driving experience
Enhanced safety
Better ride comfort
Extended service life of replacement parts

If you're considering replacing any part of your front or rear suspension, opt for doing it in pairs (both left and right sides). This ensures optimal performance and longevity of the replacement parts. In the BMW world, it's often referred to as a wishbone.

For non-M3 models, this isn't just a replacement – it's a performance upgrade. These heavy-duty components are recommended to be replaced in pairs to maximize their efficiency and provide a seamless driving experience.

Show More Show Less

OEM TRW Front Upper Control Arm - Left - E82 1M, E9X M3

T#:304216

Part#: 31102283575

In Stock

$ 90.99 USD

Add to Wish List

Qty

$ 90.99 USD

Add to Wish List

This left/driver's front upper control arm - also know as a tension strut or thrust arm. This is the control arm with the outer ball joint pointing down. This is the OE BMW replacement (made by TRW) and fits E82 1M Coupe and E90/E92/E93 M3. This control arm includes the inner pressed in bushing and outer ball joint. A direct replacement from the original manufacturer.

This part can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The inner bushing on the M3 arm is a solid rubber instead of the fluid-filled non-M design. This solid rubber part will last longer and be more responsive thanks to less deflection in the bushing. The M3 arm is a direct replacement for the stock non-M part.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 325xi 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible

Show More Show Less

TRW Right Rear Wishbone

T#:348929

Part#: 33322283546

In Stock

$ 136.24

This product was last offered at the strikethrough price on
10-08-2026

$ 67.36 USD

Add to Wish List

Qty

$ 67.36 USD

Add to Wish List

TRW is a trusted OEM supplier for control arms. Turner Motorsport trusts these as replacement parts for BMW.

33322283546

TRW Left Rear Wishbone

T#:348928

Part#: 33322283545

Ships in 4 Business Days

$ 84.79 USD

Add to Wish List

Qty

$ 84.79 USD

Add to Wish List

TRW is a trusted OEM supplier for control arms. Turner Motorsport trusts these as replacement parts for BMW.

33322283545

TRW Rear Guide Rod - Right - E82, E90, E92, E93

T#:341238

Part#: 33322283548

In Stock

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

Connects the spindle assembly to the rear subframe

Macht Schnell EDC Emulation Module

T#:5351

Part#: TMS5351

Ships on Oct 30, 2026

$ 249.99

This product was last offered at the strikethrough price on
05-29-2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:

The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required

Compatible with iDrive and non-iDrive systems

Easy 15-minute installation process with no wire cutting

Proper emulation of the EDC monitoring system

No dealer visits or coding required after installation

Completely removable at any time

Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
Will not work on vehicles equiped with BMW's Dynamic Drive system.

This item fits the following BMWs:
2008-2011 E90 BMW M3 Sedan
2008-2013 E92 BMW M3 Coupe
2008-2013 E93 BMW M3 Convertible
2006-2010 E60 BMW M5
2006-2011 E63 BMW M6
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
2008+ E71 BMW X6 xDrive35i X6 xDrive50i

Show More Show Less

TRW Rear Guide Rod - Left - E82, E90, E92, E93

T#:348950

Part#: 33322283547

Ships in 1 Business Day

$ 152.99 USD

Add to Wish List

Qty

$ 152.99 USD

Add to Wish List

Connects the spindle assembly to the rear subframe

M3/1M Upper Control Arm Upgrade Kit - Rear

These control arms are standard OE style replacement for M vehicles

T#:341241

Part#: 33322283547KT4

Ships in 4 Business Days

$ 596.99

This product was last offered at the strikethrough price on
10-08-2026

$ 529.99 USD

Add to Wish List

Qty

$ 529.99 USD

Add to Wish List

These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

Show More Show Less

OEM TRW Front Control Arm Kit - BMW E90/E92/E93 M3, E82 1M

T#:377447

Part#: 31102283577KT1

In Stock

$ 423.99

This product was last offered at the strikethrough price on
04-28-2026

$ 385.99 USD

Add to Wish List

Qty

$ 385.99 USD

Add to Wish List

Over the years, the road takes a serious toll on your suspension. Potholes, speed bumps, and road hazards all contribute to a sloppy, weak suspension. To give a better feel to your driving experience and improve safety and ride comfort, replace suspension components as they wear. After years of service, non-serviceable ball joints and other components begin to wear out. Because some components cannot be replaced, the only solution is the replacement of the entire arm. This OEM TRW kit includes all four front control arms for the E9X M3 / E82 1M. Replacing all four at once will provide the most service life out of replacement parts and ensure they are all performing properly. This kit is intended for installation on Halogen headlight-equipped models, as a headlight level sensor rod is not included.

Show More Show Less

Fall-Line Motorsports Lower Coil Over Camber Arm & Shim Set - G8X / F...

T#:20979735

Part#: F8X/E9X-1FLCOCA

Back Ordered

$ 1,095.99 USD

Add to Wish List

Qty

$ 1,095.99 USD

Add to Wish List

*NOTE: ONLY FOR CARS WITH TRUE REAR COIL OVER CONVERSION - NOT COMPATIBLE WITH STOCK REAR SPRINGS* Fall-Line Motorsports has taken everything they've learned in manufacturing over the last decade to create an ultra-high-end interpretation of the G8X / F8X M2 M3 M4 and E9X M3 lower camber arm. Fall-Line's bespoke version discards the deformation-prone stamped steel arm that includes a provision for the rear coil spring in favor of 5-axis CNC machined, billet aluminum that eliminates the rear coil mount. This pair has been gorgeously crafted and pocketed (to save weight without compromising rigidity) and is hard coat black anodized for ultimate resistance to wear. So too has the hardware been given an upgrade—10.9 grade corrosion-resistant extended bolts are included to replace the inferior factory pieces. These arms represent another exciting entry into the often neglected F8X / E9X suspension arm market and add valuable peace of mind for street or motorsport duty from the undisputed champion within the BMW realm. Product Details: For all G8X, F8X, and E9X M3 cars using TRUE Rear Coil Over Conversion ONLY DMG Mori 5-Axis CNC machined, billet aluminum construction Hard coat black anodized Includes Camber Shim Set Sold in pairs

Show More Show Less

Eibach Pro-Kit Spring Set - E9X M3

T#:377839

Part#: 20100.140

In Stock

10% off MSRP $ 439.24

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD

Add to Wish List

Qty

10% off MSRP

$ 439.24

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD

Add to Wish List

Looking to lower your BMW for a sportier appearance and improved cornering, performance, and aerodynamics? This spring kit from Eibach is a perfect solution to lower the ride height without compromising the ride quality of your BMW.

With this kit, you can expect an average lowering of:

Front - .8"
Rear - .6"

Show More Show Less

Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M ...

T#:4648679

Part#: 69.10.100

Ships in 9 Business Days

$ 289.00 USD

Add to Wish List

Qty

$ 289.00 USD

Add to Wish List

Macht Schnell's aluminum bushing kit will breathe new life into aging 1M's and M3's, affixing the car's rear subframe and differential to the chassis. Rubber subframe bushings in the E9x M3 and E82 1M from the factory are soft, and yield under hard driving resulting in ever-changing suspension geometry and alignment specs. By limiting the movement of both the car's subframe and differential, these solid bushings will give the rear of the car a tremendously planted and confident feel.

Show More Show Less

Rear Trailing Arm - Priced Each

2X Entries Into Our F80 M3 Sweepstakes

T#:637572

Part#: 33322406291

In Stock

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

Bav Auto Rear Subframe Bushing Press - E88 E9X BMW

10X Entries Into Our F80 M3 Sweepstakes

T#:580432

Part#: B8800127

Ships in 8 Business Days

Sale - Save 3% $ 419.99

This product was last offered at the strikethrough price on
05-03-2026

$ 407.39 USD

Add to Wish List

Qty

Sale - Save 3%

$ 419.99

This product was last offered at the strikethrough price on
05-03-2026

$ 407.39 USD

Add to Wish List

The Bav Auto Rear Subframe Bushing Press allows you to remove and install rear subframe bushings while the subframe is still in the vehicle, saving you several hours of labor.

Fall-Line Motorsports E9X M3 / E82 1M Adjustable Toe Arm Set - Standa...

T#:28038216

Part#: FLM-E9X-1FECOTOE

Back Ordered

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

A byproduct of multi-link suspension arrangements is a dynamic change in the car’s alignment settings- when making an adjustment to one attribute like camber, track width and toe will follow. This is especially true for the E9x cars, as the original BMW camber eccentric bolt has an impact on toe as well. Alignments are made faster and simpler when using a set of aftermarket lower arms, enabling the alignment tech to easily reset toe after adjusting camber. The standard toe link kit by Fall Line Motorsports is designed to simplify toe changes at an alignment facility while still keeping cost reasonable. The standard toe link kit keeps costs down by using a traditional jam nut design in a sturdy billet arm. Adjustable threaded rod ends turn into and out of the arm for a wide range of toe adjustment, and enable an alignment technician to easily set toe on a lowered car.

Show More Show Less

Fall-Line Motorsports E9X M3 / E82 1M Front Mono Ball Conversion Kit ...

T#:28038194

Part#: FLM-E9X-1BUNI

Ships in 3 Business Days

$ 423.00 USD

Add to Wish List

Qty

$ 423.00 USD

Add to Wish List

Fall Line’s mono ball spherical bearing conversion kit transforms the front steering and suspension feel of the M3. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M3 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm. The bearing’s housing is precision machine from aluminum, to create a rigid part that allows for the M3’s thrust arm to move smoothly through its range of suspension travel. The improvement in steering and suspension feel is immediate and truly enhances the personality of the M3. *V2 improved design also incorporates hard coat clear anodized finish*

Show More Show Less

Fall-Line Motorsports E9X M3 / E82 1M Billet Aluminum Rear Trailing A...

T#:28038203

Part#: FLM-E9X-1FRTAK

Back Ordered

$ 449.99 USD

Add to Wish List

Qty

$ 449.99 USD

Add to Wish List

OEM TRW Front Control Arm Kit - BMW E90/E92/E93 M3, E82 1M

T#:341225

Part#: 31102283577MKT

In Stock

$ 441.87

This product was last offered at the strikethrough price on
04-28-2026

$ 404.28 USD

Add to Wish List

Qty

$ 404.28 USD

Add to Wish List

Over the years, the road takes a serious toll on your suspension. Potholes, speed bumps, and road hazards all contribute to a sloppy, weak suspension. To give a better feel to your driving experience and improve safety and ride comfort, replace suspension components as they wear. After years of service, non-serviceable ball joints and other components begin to wear out. Because some components cannot be replaced, the only solution is the replacement of the entire arm. This OEM TRW kit includes all four front control arms for the E9X M3 / E82 1M. Replacing all four at once will provide the most service life out of replacement parts and ensure they are all performing properly. This kit also includes a front replacement headlight level sensor rod, which should be replaced any time the control arms are replaced on Xenon (HID) headlight-equipped models.

Show More Show Less

Rear Sway Bar End Link Kit - E9X M3/E82 1M

T#:5580964

Part#: E9X-1BRLINK

In Stock

$ 280.00

This product was last offered at the strikethrough price on
07-07-2026

$ 243.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 280.00

This product was last offered at the strikethrough price on
07-07-2026

$ 243.99 USD

Limited Qty Sale

Add to Wish List

Adjustable sway bar end links are an absolutely critical component for anyone who is serious about extracting the best possible handling from their M car. By varying the length of each link slightly, the alignment technician can ensure that the sway bar is completely unloaded and unstressed at static ride height, giving the car excellent chassis dynamics and truly even corner balance.

Show More Show Less

Rogue Engineering Toe Arm Upgrade - E9X M3 & E82 1 M Coupe

T#:553830

Part#: RE.E9X.TA.M3

Ships in 8 Business Days

$ 289.00 USD

Add to Wish List

Qty

$ 289.00 USD

Add to Wish List

When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.

This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear.

Features:

100% machined and anodized, 6061-T6 lightweight aluminum arms
High-strength, 3-piece, rod end (with carbon fiber reinforced, PTFE race) offers longer life for street compared to standard rod ends
SEALS-IT Rod end seals keep dirt, water, and other contaminants out
Rod ends feature grease fittings, to allow for rod end serviceability.
Lighter than stock! (Stock is 875g, RE arms are 640g)
Extremely easy installation and adjustment (your alignment shop will LOVE you!)

Show More Show Less

Eibach Performance Non-Adjustable Rear Sway Bar Kit - 15mm - E82/88, ...

T#:376283

Part#: 2085.312

Ships in 2 Business Days

10% off MSRP $ 299.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

Qty

10% off MSRP

$ 299.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

After shocks and springs, sway bars make the biggest change in handling. Larger swaybars will reduce bodyroll and understeer. The car will corner flatter with the tire in better contact with the pavement. New urethane bushings are included.

This is a rear 15mm sway bar that is larger than the factory sway bar.

Show More Show Less

Fall-Line Motorsports E9X M3 / E82 1M Rear Sway Bar End Link Kit - V2...

T#:28038220

Part#: FLM-E9X-1BRLINK

Back Ordered

$ 198.00 USD

Add to Wish List

Qty

$ 198.00 USD

Add to Wish List

Lowering your car is often the first step in suspension tuning, but occasionally, this process can adversely affect other associated components. Unwanted sway bar pre-load may be one of these consequential effects, adding asymmetrical spring rate bias to one side of the car versus the other. This imbalance may affect your overall chassis dynamics and corner balance. For this reason, adjustable sway bar end links are critical—by adjusting each link with the car at operating weight, you can ensure the sway bar is completely unloaded at your determined ride height, restoring your chassis' balance and your confidence in all driving situations. Unlike all other link kits on the market that utilize the cheaper and simpler jam-nuts, Fall-Line utilizes OE tie-rod end style pinch-nut fasteners to ensure they never lose their set length. NOTE: New V2 photos coming soon! V2 Key Features: Now includes OE tie-rod end style pinch-nut fastener rod ends Eliminates the typical jam-nut rod ends that are known to move over time Designed for superior corner balancing Ensures equal weight distribution on each tire Compatible with height adjustable dampers Eliminates uneven cross-weights Prevents sway bar-induced suspension stress Allows for precise customization through length variation Includes dust boots to protect against dust interference Made in USA Sold as a pair

Show More Show Less

BMW E9X M3/E82 1M Inner Lower Tension Arm Bearing

T#:5580975

Part#: FLM-E9X-1BLTABI

Ships in 3 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

BMW E9X M3/E82 1M Inner Lower Tension Arm Bearing is engineered to elevate suspension performance with precision and durability. Developed by Fall-Line, known for their championship-level race cars and premium suspension components, this bearing is a significant upgrade over factory rubber bushings. Designed for motorsport applications, it incorporates FK spherical bearings for enhanced strength and longevity.

Superior Performance: Provides a notable improvement over OEM rubber bushings for enhanced control and feedback.
Durable Construction: Features the largest FK spherical bearings available, ensuring long-lasting reliability.
Enhanced Control: Eliminates rubber components to offer better control over tire behavior and increased driver confidence.
Robust Design: Equipped with stainless steel spiral locks for 360 degrees of clamping force to secure the bearing firmly.
Long-Lasting: Outperforms OEM rubber variants, reducing the need for frequent replacements.
Precision Engineering: CNC machined from high-quality materials in the USA for exact fit and superior performance.

Show More Show Less

Lower Tension Arm Bearing - Outer - E9X M3/E82 1M

T#:5580979

Part#: FLM-E9X-1BLTABO

Ships in 3 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

By eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.

Show More Show Less

Rear Lower Control Arm Bearing Set - Outer - E9X M3/E82 1M

T#:5580972

Part#: FLM-E9X-1BLCABO

Ships in 3 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Rubber bushings found in the latest M Cars' rear camber arms are the last weak link in an otherwise rigid suspension. Fall-Line's new lower control arm bearings yield a significant improvement over the factory bushings; as motorsport parts, both strength and longevity were priorities—to do just that, Fall-Line boasts the largest FK spherical bearings on the market—by eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.

Show More Show Less

Macht Schnell Aluminum Differential Bushing Kit - E9X M3

T#:4648688

Part#: 69.10.110

Ships in 8 Business Days

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

Macht Schnell's Aluminum Differential Bushing Kit is designed to give your differential carrier more rigidity.

TRW Rear Toe Arm - E82, E90, E92, E93

T#:341239

Part#: 33322283549

Back Ordered

$ 89.24 USD

Add to Wish List

Qty

$ 89.24 USD

Add to Wish List

Connects the spindle assembly to the rear subframe

Rear Lower Control Arm Cup Subframe Bearing Set - E9X M3/E82 1M ...

T#:5580971

Part#: F8X-1BLCASB

Back Ordered

$ 419.99 USD

Add to Wish List

Qty

$ 419.99 USD

Add to Wish List

Rubber bushings found in the latest M Cars' rear camber arms are the last weak link in an otherwise rigid suspension. Fall-Line's new lower control arm subframe cup bearings yield a significant improvement over the factory bushings; as motorsport parts, both strength and longevity were priorities—to do just that, Fall-Line boasts the largest FK spherical bearings on the market—by eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with the competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.

Show More Show Less

Fall-Line Motorsports E9X M3 / E82 1M Adjustable Toe Arm Set - Race ...

T#:28071501

Part#: FLM-E9X-1FRACTOE

Back Ordered

$ 650.00 USD

Add to Wish List

Qty

$ 650.00 USD

Add to Wish List

A byproduct of multi-link suspension arrangements is a dynamic change in the car’s alignment settings- when making an adjustment to one attribute like camber, track width and toe will follow. This is especially true for the E9x cars, as the original BMW camber eccentric bolt has an impact on toe as well. Alignments are made faster and simpler when using a set of aftermarket lower arms, enabling the alignment tech to easily reset toe after adjusting camber. The race toe link kit by Fall Line Motorsports is designed to facilitate rapid adjustments of toe during an alignment, and combined with the tension strut will also enable adjustment of overall track. Not only does this allow for fine tuning of wheel fitment, these arms will allow an alignment shop to make quick work of car setup, even simplifying the camber adjustment process as a result. The race toe links utilize a unique clamp-style fastener system as seen in BMW’s own tie rods and Porsche Motorsport components, tightening the adjustment arm in place with no stretch of the hardware or change of alignment. Less expensive jam-nut designs limit precision and nearly guarantee an alignment change when the jam-nut is tightened. Laser cut lockout washers correctly eliminate the original BMW adjustment, eliminating any unwanted movement in the system.

Show More Show Less

URO Rear Upper Shock Mount - Lower Section - BMW E82/88 E9X

For vehicles without EDC

2X Entries Into Our F80 M3 Sweepstakes

T#:639538

Part#: 33506771738

Ships in 1 Business Day

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

Replace your shock mount each time you replace your shocks to reduce noise and vibrations from the road and suspension system. Failing shock mounts may also end up leading to knocking and rattling sounds coming from the rear suspension. URO Parts is one of the leading manufacturers of high quality direct replacement aftermarket components, covering a wide range of makes and models. All of their replacement parts are manufactured to ISO 9000 certification standards, so you can expect long lasting performance from URO Parts. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

URO Spring Perch - Priced Each

2X Entries Into Our F80 M3 Sweepstakes

T#:567575

Part#: 31336764093

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Supports the front spring on the strut. Also known in the E30 community as an E90 drop hat.

URO Control Arm Bushing for E82, E88, E9x

2X Entries Into Our F80 M3 Sweepstakes

T#:37959693

Part#: 33326792553

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Over time bushing crack dry rot and deteriorate, replace these bushings to restore your vehicle's original handling feel. Each vehicle requires two!

Rear Sway Bar End Link - Priced Each

2X Entries Into Our F80 M3 Sweepstakes

T#:375916

Part#: 33556764428

Ships in 1 Business Day

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

If the sway bar links are broken or worn, the system doesn't work as it should. Replace your end links with one from URO and get all the performance characteristics back.

Rogue Engineering - E82/E9X Adjustable Rear Camber Link Set V2.0 ...

T#:35829340

Part#: RE_E9X_CAMNO

Ships in 8 Business Days

$ 595.00 USD

Add to Wish List

Qty

$ 595.00 USD

Add to Wish List

Rogue Engineering E82/E9X Adjustable Rear Camber Link Set V2.0 is the ultimate upgrade for BMW enthusiasts seeking enhanced handling, improved tire wear, and precise suspension tuning. This high-performance solution is engineered to fit BMW E82 1-Series and E9X 3-Series models, offering superior adjustability and durability over OEM components. Ideal for street and track use, this camber link set is crafted from premium materials to ensure strength and long-lasting performance.

Key Features:

These replace the wishbone and guide arm links in the factory suspension which have rubber bushings and limited adjustment. Enhanced suspension adjustability for optimized alignment Improves handling and reduces uneven tire wear Compatible with BMW E82 1-Series and E9X 3-Series models Constructed from high-strength materials for durability and reliability Perfect for both street performance and track applications Turner Motorsport proudly offers the Rogue Engineering E82/E9X Adjustable Rear Camber Link Set V2.0, providing BMW drivers with unmatched performance and precision.

Show More Show Less

Vargas Double Adjust Drag Shock Kit - BMW E9X 3

2X Entries Into Our F80 M3 Sweepstakes

T#:51778132

Part#: VTT-E9/8X-DRAG-S

Ships in 10 Business Days

$ 1,104.99 USD

Add to Wish List

Qty

$ 1,104.99 USD

Add to Wish List

The VTT BMW E9X/E8X Double Adjust Drag Shock Kit is the ultimate suspension upgrade for serious enthusiasts looking to shave seconds off their ET.

TRW Control Arm And Ball Joint Assembly - BMW 1 Series M 2011, M3 201...

T#:37757269

Part#: JTC1424

Back Ordered

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Your Mercedes-Benz suspension is a finely tuned system, and the lower control arms play a crucial role in its performance. Serving as the mounting point for the springs and shock absorbers, lower control arms connect these components to both the spindle and chassis, ensuring stability and smooth handling. Over time, constant stress and exposure to the elements can cause wear in the control arms and their bushings. The only solution is to replace them to maintain optimal suspension performance.

Show More Show Less

TRW Rear Sway Bar End Link - E82, E88, E90, E91, E92, E93

T#:363587

Part#: 33556764428

Back Ordered

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

For both left and right

Bav Auto Trailing Arm Bushing Tool Set - E82/88 E84 E9X

10X Entries Into Our F80 M3 Sweepstakes

T#:587611

Part#: B8800101

In Stock

Sale - Save 8% $ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 221.39 USD

Add to Wish List

Qty

Sale - Save 8%

$ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 221.39 USD

Add to Wish List

Remove and install the rear trailing arm bushings and upper and lower rear control arm bushings with one toolset without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90, E91, E92, E93 model cars.

Show More Show Less

Bav Auto Shock and Strut Nut Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580394

Part#: B8800081

In Stock

Sale - Save 5% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Used to install or remove shock and strut nuts - no more using an impact gun!

Bav Auto Scissor Type Ball Joint / Tie Rod Separator

10X Entries Into Our F80 M3 Sweepstakes

T#:580366

Part#: B8800042

Ships on Mar 12, 2027

Sale - Save 15% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Use this tool to separate control arm ball-joints and larger tie-rod end joints. This tool is particularly beneficial when dealing with tight locations that prevent the use of non-scissor separator tools. Note that max jaw opening is 1 3/4".

Show More Show Less

Bav Auto Trailing Arm Inner Bushing Tool - Master Set

10X Entries Into Our F80 M3 Sweepstakes
Be sure to add some grease to the rods in this tool set during installation to prevent breakage.

T#:580442

Part#: B8800137

In Stock

Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Qty

Sale - Save 3%

$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.

Show More Show Less