The factory plastic gears in BMW S65 and S85 throttle body actuators are notorious for premature wear due to mechanical stress, engine vibration, and heat cycling. Over time, this wear leads to excessive play, throttle response issues, and eventual failure. This can cause DME fault codes, limp mode, and DSC malfunctions. While replacing both throttle actuators is costly, even new OEM units will eventually suffer the same fate.

Thankfully, ECS has developed the ultimate solution for E9X M3, E60 M5, and E63/64 M6 owners! These Upgraded Throttle Body Actuator Gears are constructed of Teflon-reinforced nylon, significantly reducing friction and gear tooth wear for long-term reliability. Each gear comes pre-installed on a 4140 steel shaft, strengthening the assembly and ensuring a hassle-free installation. With this cost-effective and durable fix, you can eliminate throttle actuator failures for good!

Features & Benefits:

Upgraded Teflon-reinforced nylon gears – Superior to factory plastic-on-plastic gears, reducing wear and extending lifespan. Pre-installed 4140 steel shafts – Increases durability and simplifies installation. Prevents common actuator failures – Resolves worn gear issues that cause CELs, limp mode, and DSC/DME errors. Cost-effective alternative to full actuator replacement – Saves hundreds in parts and labor. Factory-like fitment – Engineered for precise compatibility and long-term reliability. Built to withstand heat and mechanical stress – Ensures consistent throttle performance and extended service life.

High flow filter replacement to get your engine breathing better than new!

Replace your dirty, restrictive, factory air filter with the ECS Tuning Exact-Fit High Flow Dry Air Filter!

Proper air intake flow will help your engine breathe better, improving power through the power band and improving fuel economy.

Higher flow than stock paper filters, this reusable filter will show an increase in performance immediately. An easy performance modification that is a direct replacement for your OEM filter.

Oiled versus Dry Filters:

Although both options will keep the air to your engine clean and improve airflow, there are a few differences to consider when choosing the best filter for you. Oiled filters do allow slightly better airflow than dry filters, however they require more maintenance. Oiled filters will likely get dirty faster, needing to be cleaned more regularly. When cleaning an oiled filter, it is necessary to oil them with filter oil afterwards. This filter will save you money by no longer needing to replace a paper filter.

Dry filters offer slightly lower airflow but are easier to maintain while still out performing the OE paper filter. Dry filters can be washed with warm soapy water. There is no oiling necessary afterwards.

Both dry and oiled filters flow better than stock and can be reused.

Key Features:

Direct replacement for the OEM filter

Higher flow than OEM

Dry air filter

Reusable

Only needs cleaning every 50,000 miles under normal highway driving conditions

Ensure optimal engine performance with the replacement of your vacuum system hoses. The vacuum system plays a crucial role in the engine's functionality, transforming it into an efficient pump that influences air-fuel mixture and combustion. Damaged vacuum hoses can lead to various performance issues, from rough idle to difficulties starting the engine. If you're experiencing these issues, it's time to upgrade to this plastic hose with a 2.3mm inner diameter. The hose is black, arrives in an 8-foot section, and can be easily cut to the desired size for a perfect fit.

Key Features:

• Engine Optimization: Replacing old hoses ensures the vacuum system operates at peak performance.
• 2.3mm Inner Diameter: Designed to meet specific engine requirements.
• Black Color: Blends seamlessly with the engine components.
• 8-Foot Section: Provides flexibility to cut the hose to the required length.
• Easy Installation: Upgrade without hassle for improved engine efficiency.

Upgrade your vacuum system with this high-quality plastic hose, addressing performance issues and ensuring your engine runs smoothly.

The factory plastic gears in BMW S65 throttle body actuators are notorious for premature wear due to mechanical stress, engine vibration, and heat cycling. Over time, this wear leads to excessive play, throttle response issues, and eventual failure. This can cause DME fault codes, limp mode, and DSC malfunctions. While replacing both throttle actuators is costly, even new OEM units will eventually suffer the same fate.

Thankfully, ECS has developed the ultimate solution for E9X M3 owners! These Upgraded Throttle Body Actuator Gears are constructed of Teflon-reinforced nylon, significantly reducing friction and gear tooth wear for long-term reliability. Each gear comes pre-installed on a 4140 steel shaft, strengthening the assembly and preventing further failure.

Servicing the internals of S65 throttle body actuators can be a challenging task due to their intricate design. To simplify the process, ECS has developed a complete plug-and-play replacement kit. This kit includes two brand-new OEM Continental/VDO throttle body actuator assemblies, rebuilt with upgraded ECS gears and shafts for simplified installation and long-term durability. Unlike rebuilt actuators, this solution minimizes the risk of internal electrical failures, providing superior protection against common failure modes.

Features & Benefits:

Upgraded Teflon-reinforced nylon gears – Superior to factory plastic-on-plastic gears, reducing wear and extending lifespan. 4140 steel shafts – Increases durability and simplifies installation. Pre-installed inside OEM Actuators – Decreases install complexity and reduces the risk of electrical failure in rebuild units. Prevents common actuator failures – Resolves worn gear issues that cause CELs, limp mode, and DSC/DME errors. Cost-effective alternative to full actuator replacement – Saves hundreds in parts and labor. Factory-like fitment – Engineered for precise compatibility and long-term reliability. Built to withstand heat and mechanical stress – Ensures consistent throttle performance and extended service life.

For optimal performance, consider the 46.5mm To 61.0mm Silicone Coupler.

Engineered with durability and functionality in mind, this silicone coupler provides a reliable connection for various components in your vehicle's intake or cooling system. Its smooth interior surface promotes efficient airflow, while its flexible and reinforced construction ensures a secure fit and prevents leaks. Enjoy hassle-free installation and enhanced performance with this premium silicone coupler.

• Durable silicone construction
• Smooth interior surface for efficient airflow
• Flexible and reinforced design prevents leaks
• Secure fit for reliable performance
• Hassle-free installation

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

• Enhances vehicle performance
• Durable construction for long-lasting reliability
• Specifically designed for BMW vehicles

Upgrade your BMW or MINI with the BMW & MINI Silicone Coupler - Straight 2.38" (60.33mm). This high-quality silicone coupler is designed to provide a secure and leak-free connection for your vehicle's intake or cooling system. Engineered for durability and flexibility, it ensures optimal performance under various conditions. With its straight design and precise dimensions, this silicone coupler offers easy installation and a perfect fit for your BMW or MINI.

• Provides a secure and leak-free connection
• Engineered for durability and flexibility
• Straight design for easy installation
• Perfect fit for BMW and MINI vehicles