BMW Suspension Parts for BMW 3 Series E90 (2006-2011)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
Revshift - Corporate Logo
T#:1105927
Part#: BTA-E9X
Ships on Aug 6, 2026
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping
These billet aluminum rear trailing arms fit the BMW E9x and E8x including the M models. They are CNC machined from 6061-T6 aluminum and are protected by a black anodized hardcoat. These trailing arms replace the flimsy stamped oem part, stiffen the rear suspension, and improve the vehicle's handling. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Macht Schnell - Corporate Logo
T#:5351
Part#: TMS5351
Ships on Aug 7, 2026
$ 249.99

This product was last offered at the strikethrough price on
05-29-2026

$ 249.00 USD
Free Shipping
$ 249.00 USD
Free Shipping
For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:
  • The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required
  • Compatible with iDrive and non-iDrive systems
  • Easy 15-minute installation process with no wire cutting
  • Proper emulation of the EDC monitoring system
  • No dealer visits or coding required after installation
  • Completely removable at any time

    Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
    Will not work on vehicles equiped with BMW's Dynamic Drive system.

    This item fits the following BMWs:
    2008-2011 E90 BMW M3 Sedan
    2008-2013 E92 BMW M3 Coupe
    2008-2013 E93 BMW M3 Convertible
    2006-2010 E60 BMW M5
    2006-2011 E63 BMW M6
    2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
    2008+ E71 BMW X6 xDrive35i X6 xDrive50i
  • Show More Show Less

    Mubea - Corporate Logo
    T#:1196080
    Part#: 31336769916
    In Stock
    $ 81.99 USD
    Free Shipping
    $ 81.99 USD
    Free Shipping
    Replace your broken or worn out spring and restore your ride quality with this aftermarket option!

    KMAC - Corporate Logo
    T#:389667
    Part#: 193926K
    In Stock
    13% off MSRP $ 480.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 417.00 USD
    Limited Qty Sale
    Free Shipping
    13% off MSRP
    $ 480.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 417.00 USD
    Limited Qty Sale
    Free Shipping
    Rear adjustable camber and toe bushings for the E82/E9X non-M 3-series. These bushings allow you to adjust camber and toe beyond factory specs to either restore camber or add more. If you lowered your car and have too much camber these bushings can get you back to stock specs. On the flip side if you need more camber for the track or autocross, you can fine tune it with these too. These bushings press in and replace the existing rubber bushings. They are made from peformance urethane which will give more feedback and response to the driver. Sold as a set with a bushing extraction tool included.

    Fits the following BMWs:
    E82/88 BMW 2 Series
    E89 BMW Z4
    E9X BMW Non-M
    Show More Show Less
    Macht Schnell - Corporate Logo
    T#:4648679
    Part#: 69.10.100
    Ships in 8 Business Days
    $ 289.00 USD
    Free Shipping
    $ 289.00 USD
    Free Shipping
    Macht Schnell's aluminum bushing kit will breathe new life into aging 1M's and M3's, affixing the car's rear subframe and differential to the chassis. Rubber subframe bushings in the E9x M3 and E82 1M from the factory are soft, and yield under hard driving resulting in ever-changing suspension geometry and alignment specs. By limiting the movement of both the car's subframe and differential, these solid bushings will give the rear of the car a tremendously planted and confident feel.
    Show More Show Less

    Mubea Front Coil Spring - E90
    For vehicles with automatic transmission only
    Mubea - Corporate Logo
    T#:383146
    Part#: 31336769918
    Ships in 10 Business Days
    $ 52.99 USD
    Free Shipping on orders $49 and up
    $ 52.99 USD
    Free Shipping on orders $49 and up
    Replace your cracked springs
    KMAC - Corporate Logo
    T#:600206
    Part#: 193926-3H
    Ships on Aug 14, 2026
    $ 320.00 USD
    Free Shipping
    $ 320.00 USD
    Free Shipping
    Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves
    Show More Show Less

    Revshift - Corporate Logo
    T#:1105926
    Part#: ASB-E9X
    Ships in 5 Business Days
    $ 299.99 USD
    Free Shipping
    $ 299.99 USD
    Free Shipping
    Revshift billet aluminum subframe bushings completely replace the oem rubber bushings on the BMW E82, E90, E91, E92, and E93 including the M3, 1M, and XI models. These bushings solid mount the rear subframe reducing wheel hop and improving the vehicles handling capabilities. The two piece bushing design sandwiches the subframe locking it in place. It will not shift on the bushings while driving like the one piece designs allow. They are CNC machined at Revshift in the USA from 6061-T6 billet aluminum.
    Show More Show Less

    Rogue Engineering - Corporate Logo
    T#:553830
    Part#: RE.E9X.TA.M3
    Ships in 8 Business Days
    $ 289.00 USD
    Free Shipping
    $ 289.00 USD
    Free Shipping

    When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.

    This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear. 

    Features:

    • 100% machined and anodized, 6061-T6 lightweight aluminum arms
    • High-strength, 3-piece, rod end (with carbon fiber reinforced, PTFE race) offers longer life for street compared to standard rod ends
    • SEALS-IT Rod end seals keep dirt, water, and other contaminants out
    • Rod ends feature grease fittings, to allow for rod end serviceability.
    • Lighter than stock!  (Stock is 875g, RE arms are 640g)
    • Extremely easy installation and adjustment (your alignment shop will LOVE you!)
    Show More Show Less
    Revshift - Corporate Logo
    T#:47199273
    Part#: PSB-E9X-95A
    Ships in 1 Business Day
    $ 249.99 USD
    Free Shipping on orders $49 and up
    Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
    Show More Show Less
    Macht Schnell - Corporate Logo
    T#:4648688
    Part#: 69.10.110
    Ships in 8 Business Days
    $ 299.00 USD
    Free Shipping on orders $49 and up
    Macht Schnell's Aluminum Differential Bushing Kit is designed to give your differential carrier more rigidity.


    KMAC - Corporate Logo
    T#:389646
    Part#: 192416-3L
    Special Order: No Guaranteed ETA
    $ 545.00 USD
    Free Shipping
    $ 545.00 USD
    Free Shipping
    Location: Front
    Type: Street/Track, Stage 2
    Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
    Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

    The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

    Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

    This item fits the following BMWs:
    2008-2012  E82 BMW  128i 135i
    6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
    2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
    2006-2012  E91 BMW  328i - Wagon
    2007-2013  E92 BMW  328i 335i 335is - Coupe
    2007-2013  E93 BMW  328i 335i - Convertible
    1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
    2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
    2004-2011  E63 E64 BMW  645ci 650i
    1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
    2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    2000-2003  E52 BMW  Z8 Roadster (without EDC)
    Show More Show Less
    KMAC - Corporate Logo
    T#:389647
    Part#: 192416-2L
    Special Order: No Guaranteed ETA
    $ 545.00 USD
    Free Shipping
    $ 545.00 USD
    Free Shipping
    Location: Front
    Type: Street/Track, Stage 2
    Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
    Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

    The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

    Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

    This item fits the following BMWs:
    2008-2012  E82 BMW  128i 135i
    6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
    2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
    2006-2012  E91 BMW  328i - Wagon
    2007-2013  E92 BMW  328i 335i 335is - Coupe
    2007-2013  E93 BMW  328i 335i - Convertible
    1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
    2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
    2004-2011  E63 E64 BMW  645ci 650i
    1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
    2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    2000-2003  E52 BMW  Z8 Roadster (without EDC)
    Show More Show Less
    KMAC - Corporate Logo
    T#:389662
    Part#: 193616-3L
    Special Order: No Guaranteed ETA
    $ 545.00 USD
    Free Shipping
    $ 545.00 USD
    Free Shipping
    Location: Front
    Type: Track, Stage 3
    Bearing: PTFE-lined pillow-ball, no bushing

    KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

    Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

    This item fits the following BMWs:
    1997-2003  E39 BMW  525i 528i 530i 540i (for cars with EDC)
    1999-2003  E39 BMW  M5
    1995-2001  E38 BMW  740i 740il 750il (for cars with EDC)
    2004-2010  E60 BMW  M5
    2004-2011  E63 BMW  M6
    Show More Show Less

    KMAC - Corporate Logo
    T#:389317
    Part#: 193616-2L
    Special Order: No Guaranteed ETA
    $ 545.00 USD
    Free Shipping
    $ 545.00 USD
    Free Shipping
    Location: Front
    Type: Street/Track, Stage 2
    Bearing: PTFE-lined pillow-ball with thin polyurethane bushing

    The Stage 2 KMAC plates are a mixed street/track camber/caster plate meant to be used in a variety of suspensions. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions. Bearing inserts and adapters included. The Stage 2 camber plates are shorter than a factory mount so may not be suitable for cars will little suspension travel. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Detailed instructions included.

    Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

    This item fits the following BMWs:
    2006-2008  E85 BMW  Z4 M Roadster M Coupe
    Show More Show Less

    Rogue Engineering - Corporate Logo
    T#:553834
    Part#: RE.E9X.TA
    Special Order: No Guaranteed ETA
    $ 339.00 USD
    Free Shipping
    $ 339.00 USD
    Free Shipping

    Updated design!  Now shipping!

    When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.

    This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear. 

    Features:

    100% machined and anodized, 6061-T6 lightweight aluminum arms (and collars).

    Stainless hardware and spacers are perfect for the tough Northeast climate!

    New!  Easy adjustment with 22mm open ended wrench and 5mm allen key!  It only requires 15 ft. lbs. on the clamp to secure the clamp!

    New!  Included lock-out kit, replaces factory eccentric hardware.

    Updated 3-piece rod ends features 4130 chromoly steel bodies, heat-treated, alloy steel races, and Teflon liners

    Extremely easy installation and adjustment (your alignment shop will LOVE you!)

    Show More Show Less
    GSP North America - Corporate Logo
    T#:389678
    Part#: 827214
    Ships in 3 Business Days
    $ 188.99 USD
    Free Shipping
    $ 188.99 USD
    Free Shipping

    Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

     

    This item fits the following BMWs: 

    E82/88 BMW 128i 135i

    E90/92 BMW 325i 328i 328i xDrive 330i 335i

    Show More Show Less

    GSP North America - Corporate Logo
    T#:389680
    Part#: 827213
    Ships in 3 Business Days
    $ 188.99 USD
    Free Shipping
    $ 188.99 USD
    Free Shipping

    Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

     

    This item fits the following BMWs: 

    E82/88 BMW 128i 135i

    E90/92 BMW 325i 328i 328i xDrive 330i 335i

    Show More Show Less
    Revshift - Corporate Logo
    T#:47199272
    Part#: PSB-E9X-80A
    Ships in 1 Business Day
    $ 249.99 USD
    Free Shipping on orders $49 and up
    Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
    Show More Show Less

    Rogue Engineering - Corporate Logo
    T#:35829340
    Part#: RE_E9X_CAMNO
    Ships in 8 Business Days
    $ 595.00 USD
    Free Shipping on orders $49 and up

    Rogue Engineering E82/E9X Adjustable Rear Camber Link Set V2.0 is the ultimate upgrade for BMW enthusiasts seeking enhanced handling, improved tire wear, and precise suspension tuning. This high-performance solution is engineered to fit BMW E82 1-Series and E9X 3-Series models, offering superior adjustability and durability over OEM components. Ideal for street and track use, this camber link set is crafted from premium materials to ensure strength and long-lasting performance.

    Key Features:

    These replace the wishbone and guide arm links in the factory suspension which have rubber bushings and limited adjustment. Enhanced suspension adjustability for optimized alignment Improves handling and reduces uneven tire wear Compatible with BMW E82 1-Series and E9X 3-Series models Constructed from high-strength materials for durability and reliability Perfect for both street performance and track applications Turner Motorsport proudly offers the Rogue Engineering E82/E9X Adjustable Rear Camber Link Set V2.0, providing BMW drivers with unmatched performance and precision.

    Show More Show Less

    Revshift - Corporate Logo
    T#:47199274
    Part#: PSB-E9X-75D
    Ships in 7 Business Days
    $ 249.99 USD
    Free Shipping on orders $49 and up
    Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
    Show More Show Less
    Mubea Rear Sport Spring - E90
    For vehicles with M Sports package
    Mubea - Corporate Logo
    T#:383193
    Part#: 33536767347
    Ships on Aug 12, 2026
    $ 72.99 USD
    Free Shipping on orders $49 and up
    $ 72.99 USD
    Free Shipping on orders $49 and up
    Replace your broken springs
    Mubea Front Coil Spring - E90, E92
    For vehicles with manual transmission only
    Mubea - Corporate Logo
    T#:383143
    Part#: 31336767378
    Ships on Aug 12, 2026
    $ 58.99 USD
    Free Shipping on orders $49 and up
    $ 58.99 USD
    Free Shipping on orders $49 and up
    Replace your cracked springs