Single piece 6061 construction, optimized cooling, provisions for temp sensor, and external cooler with removable air duct.

Built to last, made from a single piece of 6061 billet aluminum with a rugged and good-looking hard-coat anodizing the Turner diff cover can handle anything you throw at it. Not only is it an absolute masterpiece, but this billet diff cover checks all the boxes for features needed. Reinforced mounting ear for strength and stability. The mounting ear is unified with the one-piece billet cover and features added material for the highest durability possible. This diff cover is cool, literally, the entire construction was designed with optimized cooling in mind. External fins are strategically placed on the rear face, bottom, and between the mounting ears of the cover, serving as effective heat sinks for optimal heat dissipation. This ensures stable temperatures, promoting longevity for both the fluid and your differential. Additionally, the internal design ensures continuous oiling and lubrication of the ring gear, maintaining its stability and preventing fatigue by controlling heat more effectively. An internal baffle at the cover's corner helps maintain proper pressure and prevents cavitation.

All of the OEM features were retained along with the upgrades. The drain and fill plugs on the diff cover are upgraded to -6AN using the provided high-pressure fittings with replaceable o-rings. The drain and fill plugs can now be used for an external oil cooler allowing you to further expand the fluid capacity for optimized cooling and service intervals. To keep an eye on things from the driver seat is 1/8 NPT provision for temp sensors, this product from Turner has you covered at every turn.

Upgrading to our Turner Billet Differential cover gives you the strength you need to push your car to its limits without worrying about snapping a diff mount from clutch kicking or other shocks to the drivetrain. In addition to its enhanced strength, this differential cover includes numerous other upgrades and conveniences. These include improved cooling and lubrication for the ring gear, upgraded fill and drain plugs, and the option to expand an external oil cooler for extreme motorsport usage. Designed to complement both upgraded daily drivers and extensively modified track cars, it also offers a visually appealing design.

Key Benefits:

Reinforced mounting ear for strength and stability 16% Increased fluid capacity External fins on the back side, bottom, and mounting ear on the casing for maximum cooling and consistent fluid temps Removeable air duct to direct air across the cooling fins for even more temperature control Optimized internal design to keep fluid consistently on the ring gear Integrated breather to prevent cavitation by venting the appropriate amount of pressure being built up in the diff housing -6AN ports to incorporate the use of a differential cooler - this increases capacity and lowers temps allowing for extended fluid change intervals 1/8 NPT fitting for the use of a temp sensor to monitor fluid temperature Design:

Fits manual transmission Large Case 215mm differentials Single piece 6061 Billet aluminum construction T6 Black hard coat anodizing for superior corrosion resistance and aesthetics Compatible with most differential coolers(-6AN) and temp sensors(1/8 NPT) Designed to accommodate oversized rear sway bars Retains OEM mounting features Factory geometry bushing size for use with OEM and aftermarket poly bushings Removeable air duct for easy access to sensors and drain/fill plug

Convert your open differential to a locked differential without the costly expense of an LSD replacement.

Get your car ready for aggressive track driving or drifting without purchasing or replacing your differential. The weld-in plates strengthen your diff and allow both wheels to engage simultaneously giving you a more predictable and capable track car.

An open differential allows the wheels to spin at different speeds and sends power to the wheel with the least amount of traction. This may be a good feature for your regular everyday driver but limits you on the track. The weld-in plates simulate a driving experience similar to a limited-slip differential allowing you to put power to both wheels in a low traction area or initiate drifts.

Features and benefits:

Added strength to your differential gears
Converts from open differential
Fabricated to fit in the spider gears for an easier weld and increased confidence
Made from 7 gauge mild steel, formed to fit

• Complete hardware replacement kit
• Includes 10 Differential Ring Gear Bolts and new axle seals
• Ensures optimal performance for your differential
• Ideal for upgrading to a Limited-Slip differential or restoring your existing one
• Hassle-free installation process

Streamline the setup process for your Limited Slip Differential (LSD) with this mandatory back-lash setting tool. This custom-designed tool is instrumental in reducing installation time by a whopping 50%! It's important to note that this tool is not part of BMW's offerings. Should there be any defects or warranty-related matters, it's advisable to directly reach out to Team M Factory for prompt resolution.

Differential Rebuild Kit Plus by Team MFactory

Upgrade your BMW's differential with the Differential Rebuild Kit Plus by Team MFactory. Whether you've recently replaced your differential or upgraded to a Limited-Slip, it's essential to replace the hardware to ensure optimal performance. This comprehensive kit from ECS Tuning includes 10 Differential Ring Gear Bolts, new axle seals, and new differential bearings, providing everything you need for a complete differential rebuild. With high-quality components, you can trust this kit to support your new differential or rebuild your existing unit effectively.

• Comprehensive kit includes Differential Ring Gear Bolts, axle seals, and differential bearings
• Ensures optimal performance of your BMW's differential
• Perfect for differential replacement or upgrades to Limited-Slip
• High-quality components for reliability and durability
• Provides all necessary hardware for a complete rebuild

Upgrade your BMW's drivetrain with this comprehensive kit that includes a new pumpkin for a hassle-free bolt-in replacement. Plus, enjoy the added benefit of a $500 refundable core charge. For any defects or warranty claims, please directly reach out to Team M Factory.

The best way to gain a prominent advantage over the competition is to do it with the MFactory Helical Limited Slip Differential. The smooth consistent distribution of power to the wheels with the MFactory Helical LSD puts the power-to-the-ground and maximizes your vehicle's traction. A must for any car be it street, strip, or track.

What exactly does an LSD do you ask? Without an LSD your car is actually 1 wheel drive, in that it can't supply torque to both wheels at the same time and will only supply torque to the wheel with less grip, which is what the shortfall is to an open differential (what most vehicles have).

An LSD only lets the wheels spin at different speeds by a limited amount (typically this is a percentage difference) which is when the differential locks and both wheels get power. This is not how locked differentials work such as in off-road trucks which supply equal torque and rotational speed to both rear wheels at the same time, which can cause issues with handling.

Features:

Industry first, 30-day Feel the Torque™ money back guarantee and a Limited-Lifetime Warranty!
Forged and Cryo-tempered
Advanced Shot Peening technology for increased surface hardness
Designed to withstand the extreme shock loads of competition-level drag racing
Maintenance-free gears eliminate the need for special fluid or rebuilds associated with typical plate LSDs.
Lock-free operation ensures no adverse steering response.
**As a break-in procedure, we recommend changing the fluid after the first 3-400 miles of use.**

Includes $500 core charge to be refunded when we receive your rebuildable core.

The best way to gain a prominent advantage over the competition is to do it with the MFactory Helical Limited Slip Differential. The smooth consistent distribution of power to the wheels with the MFactory Helical LSD puts the power-to-the-ground and maximizes your vehicle's traction. A must for any car be it street, strip, or track.

What exactly does an LSD do you ask? Without an LSD your car is actually 1 wheel drive, in that it can't supply torque to both wheels at the same time and will only supply torque to the wheel with less grip, which is what the shortfall is to an open differential (what most vehicles have).

An LSD only lets the wheels spin at different speeds by a limited amount (typically this is a percentage difference) which is when the differential locks and both wheels get power. This is not how locked differentials work such as in off-road trucks which supply equal torque and rotational speed to both rear wheels at the same time, which can cause issues with handling.

Features:

An industry first, 30-day Feel the Torque™ money back guarantee and a Limited-Lifetime Warranty!
Forged and Cryo-tempered
Advanced Shot Peening technology for increased surface hardness
Designed to withstand the extreme shock loads of competition-level drag racing
Maintenance-free gears eliminate the need for special fluid or rebuilds associated with typical plate LSDs.
Lock-free operation ensures no adverse steering response.
**As a break-in procedure, we recommend changing the fluid after the first 3-400 miles of use.**

Includes $500 core charge to be refunded when we receive your rebuildable core.