Turbos for BMW 3 Series E90 (2006-2011)

Clear BMW chassis

Please ensure your correct model is selected

If more boost and reliability are your goals choose from one of our BMW turbo upgrades. Our turbo upgrades range from stock turbos rebuilt with stronger internals to all-new, ground-up turbo upgrades. BMW turbos such as the N54 are capable of really impressive power numbers on stock engine internals but the factory turbos lack the precise tolerances and reliability that an upgraded unit will deliver. In other words, the stock turbos can only do so much and if big power (>400whp) is your goal a turbo upgrade must be in your plans. Our partners are leading experts in turbo technology and upgrades. Each Stage has been professionally developed and tested. Additional upgrades and tuning may be, or is, required. Contact us for more details on tuning options.

Sub-Categories

Sort By:

Vargas Turbo Technologies - Corporate Logo
T#:7530040
Part#: VACUUMCANBLUE
Ships in 1 Business Day
$ 199.99 USD
Free Shipping on orders $49 and up
VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620
Show More Show Less
Turbo Boost Leak Testers - Corporate Logo
T#:641167
Part#: BMW-N54-CAP
Ships in 1 Business Day
$ 49.00 USD
Free Shipping on orders $49 and up
This Boost Leak Tester kit mounts inside both of the flexible intake hoses that lead to your turbo's compressor inlet flanges. You will need to remove the air box (or your aftermarket air filters) to expose the 2 intake pipes. Install the testers in each pipe and pressurize the system using the tire schrader with your tire inflation tool. The kit comes with the necessary caps to block the diverter valve return flanges on the intake pipes, also a cap to block the breather line at the bakc of the valve cover. Once the kit is installed, use compressed air to charge the system and you will see that both gauges read the compressor pressure you are filling with. You'll be able to test the turbo to the motor checking all leak points in between, including intercooler, clamped connections, intake manifold, divertor valves and the many random potential leak points. Note: Testing at the intake pipe, you may hear noise coming from the o-ring (at ~12 psi test pressure) that seals the intake pipe to the turbo inlet from debris. This is not a boost leak, these are not meant to see boost and not intended to be perfectly sealed, however hearing this hissing may be mis-diagnosed as a leak. In this case reduce the pressure. If no obvious leaks are heard in any other location, the test is complete and there are no significant leaks The gauge on the boost leak tester allows the user to: apply a safe amount of pressure to prevent injury or damage to the charge pipes or engine read how fast the system holds and bleeds air after removing the air source give a good comparison of compressor outlet air Vs. boost test air while pressurizing. The smaller the difference the lesser the air loss in the system Design Features: Plastic End Caps with 1/8" NPT threaded gauge port & fitting port Boost Gauges with 30 PSI / 1Bar Boost Gauge Universal Tire Schrader Valve (can be removed and tapped for 1/4" NPT thread fitting if desired) (2) Stainless Steel T-Bolt Clamps with Teflon lock-nut (3) Vinyl Caps for diverter valve return and valve cover breather
Show More Show Less
Packaged by Turner - Corporate Logo
T#:41863724
Part#: 116575857456TKT
Ships on Aug 5, 2026
$ 164.99 USD
Free Shipping on orders $49 and up
Get rid of that annoying N54 Wastegate Rattle for good!

Forge - Corporate Logo
T#:384539
Part#: FMBH335D
Special Order: No Guaranteed ETA
$ 223.99 USD
Free Shipping on orders $49 and up

Because of where the stock boost hose is located - often leaks go unnoticed. Replace your stock hose that is prone to failure with this 4ply Fluorosilicone hose that is better suited to handle the pressures, temperatures, and withstand total failure caused by oil. Couplers are CNC machined. Following instructions is necessary - if installed incorrectly, the hose will seem too short for its application.

This product fits the following BMWs:
2006-2012 E90 335d

Show More Show Less

Packaged by Turner - Corporate Logo
T#:51883669
Part#: T11658509323BKT
In Stock
New Item
Sale - Save 3% $ 176.99

This product was last offered at the strikethrough price on
05-03-2026

$ 171.26 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 176.99

This product was last offered at the strikethrough price on
05-03-2026

$ 171.26 USD
Free Shipping on orders $49 and up
The factory boost solenoids, also known as pressure converters, are a common issue on the M57 engine. The vacuum hose also hardens over time due to heat, and can crack or split, leading to vacuum leaks. These failures result in a loss of power, limp mode, lazy throttle response, and check engine lights. This basic kit includes two replacement boost solenoids to restore engine power and performance, plus new silicon vacuum hose that will last much longer than the OE rubber vacuum hose.
Show More Show Less
The Turbo Engineers - Corporate Logo
T#:16009710
Part#: SW10070.1
Ships on Aug 5, 2026
$ 2,213.99 USD
Free Shipping on orders $49 and up

Enhance Your BMW 135i & 335i RHD with TTE Turbochargers

Achieve peak performance with TTE Turbochargers, meticulously engineered for BMW 135i & 335i RHD models. Each turbocharger undergoes precise balancing, ensuring longevity and optimal performance. The TTE Highly Efficient Next Gen Billet Compressor Geometry and Special Turbine deliver unparalleled efficiency and power. With a proven track record of 500+PS and fast spool, these turbochargers offer exceptional performance. Designed for plug & play installation, they come with Genuine actuators and require 2" intakes. Made in Germany, each pair of turbochargers is meticulously tested and supplied with a balance test result document, guaranteeing TheTurboEngineers quality.

  • TTE Highly Efficient Next Gen Billet Compressor Geometry
  • Special Turbine for enhanced performance
  • Genuine actuator included for seamless fitment
  • Fast spooling with 500+PS proven performance
  • Meticulously balanced for longevity and optimal performance
Show More Show Less

Packaged by Turner - Corporate Logo
T#:55317702
Part#: 13712247398KT5
Ships on Sep 2, 2026
New Item
$ 1,868.67 USD
Free Shipping on orders $49 and up
Are your factory N54 turbos plagued by the dreaded wastegate rattle, or worse, starting to blow smoke? Don't just replace them—upgrade your ultimate driving machine with the ultimate DIY refresh kit.
Show More Show Less