BMW Intake Parts for BMW 3 Series E90 (2006-2011)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

Precision Raceworks - Corporate Logo
T#:5229478
Part#: 501-0018
In Stock
$ 39.99 USD
Free Shipping on orders $49 and up
The Black Market Parts Extended Intake Manifold Studs are the same great product that come with our N54/N55/S55 Port Injection Kit. These studs are compatible with any port injection kit and can even be used with stock manifolds. Each stud is designed like factory and is removed/installed with the same e-torx socket the factory 7mm studs are removed with so no switching tools or specialty stud installers needed.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38229120
Part#: 622-0136
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks Replacement Air Filters are a perfect choice when looking to replace your dirty or damaged PR inlet filters.
Precision Raceworks - Corporate Logo
T#:5229488
Part#: 501-0081
Ships in 7 Business Days
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping
The Precision Raceworks Phenolic Spacer is made in the USA from premium fiber impregnated phenolic material. With a Rockwell Hardness of 100 and a conductivity rating of 2.03 it is the perfect material for insulating between heat generating parts such as the cylinder head and other parts you wish to stay cool like the intake manifold. A phenolic spacer works by reducing heat transfer from the cylinder head to the manifold which results in reduction of intake air temperature, allowing for cooler air to enter the cylinders which is more dense and reduces chance of detonation in the cylinder. Our 1/2" phenolic spacer not only provides a thermal insulation between the cylinder head and intake plenum. It has also been designed to make use of factory O-Rings rather than messy gasket maker adhesive to ensure an air tight seal each and every time along with easy installation and removal.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:21637194
Part#: 501-0026
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up

BMW E8X E9X Turbo Inlet Flange Adapter Kit 1.75" To 2" by Turner Motorsport is designed to facilitate a seamless upgrade for your turbo system. This precision adapter kit allows BMW E9X and E8X owners to run 2" relocated inlets on stock turbos with confidence, ensuring a secure fit without the risk of the inlets slipping off.

  • Secure Fit: Prevents inlets from slipping off the turbo flange, ensuring a tight and reliable connection.
  • Precision Engineering: Made from high-quality materials for a perfect fit and enhanced performance.
  • Easy Upgrade: Allows for easy transition from 1.75" to 2" turbo inlets, providing improved airflow and performance.
  • Durable Construction: Built to withstand high pressures and temperatures, ensuring long-term reliability.
  • Compatible Design: Specifically designed for BMW E8X and E9X models, making it a perfect fit for your vehicle.
Show More Show Less

Intake Manifold Upgrade Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15710827
Part#: 11617559523-KT
In Stock
Sale - Save 25% $ 902.99

This product was last offered at the strikethrough price on
05-03-2026

$ 677.38 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 902.99

This product was last offered at the strikethrough price on
05-03-2026

$ 677.38 USD
Free Shipping on orders $49 and up
The E90 330i had the highest horsepower out of the N52-powered vehicles. The reason for this was while the 128i, 325i, 328i, 525i, and 528i received a single-stage manifold, the 330i was gifted a 3-stage manifold. A 3-stage manifold consisted of 2 DISA valves that would divert air to the cylinders that needed it. With more air going to the appropriate cylinders and fuel adjustments by the ECU, this valve system helps extract the most power from the N52. Luckily this amazing manifold bolts on to any version of the N52 and, after a flash of the ECU, can give you up to 42hp! *Flash Software not currently available from ECS Tuning* Kit includes: 330i intake manifold Both DISA valves Gaskets Mounting hardware Crankcase vent hose
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38229118
Part#: 601-0027
Ships on Sep 17, 2026
$ 339.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks N54 Relocated Inlet Kit is the highest flowing and highest quality inlet system available for the N54 on the market! Since our development, many others have followed making silicone inlet systems. Don’t be fooled into thinking all kits are the same, our design features wire inlayed high temp silicone to prevent melting or collapsing due to heat and vacuum of the turbo. Best of all our kit does not require you to butcher your factory harness to relocate the coolant expansion tank. Our kit includes a plug-and-play extension harness featuring OEM weatherproof connectors for easy installation. *NOT COMPATIBLE WITH RHD VEHICLES
Show More Show Less

Continental Throttle Body Assembly
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:580192
Part#: A2C59514303
Ships in 3 Business Days
$ 456.74 USD
Free Shipping
$ 456.74 USD
Free Shipping


Genuine BMW Throttle -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less
OEM VDO HFM/Mass Air Sensor - E9x E60 E85 Z4
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:14948
Part#: 13627520519
Ships in 1-2 days
$ 373.83

This product was last offered at the strikethrough price on
08-13-2026

$ 268.00 USD
Free Shipping
$ 268.00 USD
Free Shipping

This is the replacement mass air sensor to fit the M54 and N52 engine used in the E9x 325i, 330i, E60 525i 530i and Z4 with N52 engine. This HFM is manufactured by OEM supplier Siemens/VDO and is a direct replacement for the stock HFM. The mass air sensor/meter measures the volume of air being fed into the engine so that the fuel levels can be adjust for optimal performance. A faulty sensor can lead to improper fuel mixture and rough idle and poor performance and gas mileage. Replace your faulty sensor with a high quality OEM VDO sensor to restore normal operation. 

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2006-2006 E90 BMW 325i 325xi 330i 330xi - Sedan
2006 E91 BMW 325xi - Wagon
2004-2007 E60 BMW 525i 525xi 530i 530xi
2006-2008 E85 BMW Z4 3.0i Z4 3.0si

Show More Show Less

OEM VDO Boost Pressure Sensor -- N54 N55 N63 N74
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:374114
Part#: 13627585493
Back Ordered
$ 112.00

This product was last offered at the strikethrough price on
05-07-2026

$ 108.99 USD
Free Shipping
$ 108.99 USD
Free Shipping

Used in the intake system, this sensor detects boost pressure and protects from over-boost. Replace your faulty sensor with an OEM VDO replacement.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicle's original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Precision Raceworks - Corporate Logo
T#:38229122
Part#: 501-0001
In Stock
$ 12.99 USD
Free Shipping on orders $49 and up
The Black Market Parts OE-Spec Intake Manifold O-Rings kit is made with Viton capable of withstanding all fuels (including e85) as well as oils. These o-rings are made to OE specifications and are a direct replacement for the seals found in your factory intake manifold. These o-rings are also used in other BMP products such as our N54/N55 Port Injection Kit, S55 Port Injection kit, N54 Performance Intake Manifold, and N55 Performance Intake Manifold.
Show More Show Less
1 Meter Vacuum Hose (3.5x7.5)
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:9448313
Part#: 11727545323-1M
In Stock
$ 8.99 USD
Free Shipping on orders $49 and up
Used in many locations on the engine
Throttle Body Actuator - Set
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15644244
Part#: 136278380850KT
In Stock
$ 2,201.99 USD
Free Shipping on orders $49 and up
If your M3 has recently gone into "limp mode" and tripped some engine codes, you may have a faulty throttle body actuator. The plastic gear teeth become rounded and broken over time, resulting poor or no throttle response to your input.
Show More Show Less


Conti Tech Vacuum Hose (3.5x7.5) - 1 Meter
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:374693
Part#: 11727545323
In Stock
$ 8.25 USD
Free Shipping on orders $49 and up
Used in many locations on the engine
Throttle Body Kit - E70, E90 - M57
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56507808
Part#: 11717804384KT2
Ships in 3 Business Days
New Item
Sale - Save 1% $ 201.80

This product was last offered at the strikethrough price on
08-31-2026

$ 199.78 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 201.80

This product was last offered at the strikethrough price on
08-31-2026

$ 199.78 USD
Free Shipping on orders $49 and up
This value targeted refresh package to restore factory fresh sealing and immediate throttle pickup to your intake tract. Anchored by a Bremman throttle body and backed by Victor Reinz sealing tech, this value kit swaps out tired, brittle factory components
Show More Show Less
Packaged by Turner - Corporate Logo
T#:221962
Part#: TMS221962
Ships in 3 Business Days
$ 458.99 USD
Free Shipping
$ 458.99 USD
Free Shipping
The BMW N52 engine was deisgned with a crankcase vent system that relies on a heated oil separator valve to separate vapor from the liquid oil. Under ideal circumstances, the oil vapor would pass back into the intake and get burned up during normal combustion. The liquid oil would follow a path back down into the oil pan and be reused. This system is environmentally friendly but plagued with problems. The heating elements can fail or oil and carbon particles can block the oil separator valve. With no escape, the oil will continue to pool and collect in the valve cover or make its way into the combustion chamber leading to excessive oil consumption, blue smoke from the exhaust, idle and running issues. These issues are worse in colder climates where the freezing temperatures create an oil sludge condition that is impossible to clear. The plastic hoses can become brittle and crack which leads to vacuum leaks and oil leaks. Thankfully, the CCV is replaceable on the early N52 engines (2006 and some 2007 models) and should be inspected during a major service and any time the valve cover is off. Oil can also back up into the throttle body, which is easier to check than the oil separator itself. Later N52 engines do not have a serviceable oil vent as it is integrated into the valve cover and not a separate part.

This is a kit containing the oil separator, the vent hoses, and the intake manifold gaskets that are done during a typical oil separator replacement. Complete kit includes:
  • 11617531423, Genuine BMW oil separator
  • 11617559530, vent hose
  • 11157522931, oil separator hose
  • 11157567801, return hose
  • 11157537701, extraction hose
  • 11617547242, intake manifold gaskets (set of 6)
    The intake manifold must be removed to access the oil separator so new profile gaskets are included. We also recommend (but not required) a new oil separator fitting on the intake manifold because it's one of the heated elements that vaporizes the oil as it enters the intake.

    The oil separator can be replaced on its own but for a complete service we also recommend replacing the oil separator hoses and cleaning the valve cover. Any valve cover or intake manifold work should include a new oil separator valve.

    This kit fits the following BMWs:
    -10/2005 E90 BMW 325xi 330xi - Sedan
    -10/2005 E91 BMW 325xi - Wagon
    -10/2005 E60 BMW 525xi 530xi
  • Show More Show Less

    Disa Valve Kit - with hardware
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15710808
    Part#: 11617579114-KT
    Ships in 3 Business Days
    Sale - Save 1% $ 605.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 597.50 USD
    Free Shipping on orders $49 and up
    Sale - Save 1%
    $ 605.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 597.50 USD
    Free Shipping on orders $49 and up
    Air adjustment unit controls the path of the air in the intake manifold, allowing either a shorter or longer runner length. A common source of trouble causing low RPM sluggishness and accompanied by a clicking sound from the engine bay.
    Show More Show Less

    Mass Air Flow Sensor (MAF) Kit - M57
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56507867
    Part#: 13628509725KT2
    Ships in 2 Business Days
    New Item
    $ 171.99

    This product was last offered at the strikethrough price on
    08-14-2026

    $ 131.99 USD
    Free Shipping on orders $49 and up
    $ 131.99 USD
    Free Shipping on orders $49 and up
    Turner Motorsport has put together a focused replacement kit featuring a genuine Bosch MAF sensor alongside all new installation hardware. The included Bosch sensor ensures your ECU receives exact airflow measurements under high load and daily driving alike, while the factory spec Torx screws and robust hose clamp ensure a precise, airtight seal against unmetered air entry.
    Show More Show Less
    Precision Raceworks - Corporate Logo
    T#:38229117
    Part#: 622-0131
    Ships in 7 Business Days
    $ 349.99 USD
    Free Shipping on orders $49 and up
    The Precision Raceworks N54 Relocated Inlet Kit is the highest flowing and highest quality inlet system available for the N54 on the market! Since our development, many others have followed making silicone inlet systems. Don’t be fooled into thinking all kits are the same, our design features wire inlayed high temp silicone to prevent melting or collapsing due to heat and vacuum of the turbo. Best of all our kit does not require you to butcher your factory harness to relocate the coolant expansion tank. Our kit includes a plug-and-play extension harness featuring OEM weatherproof connectors for easy installation. *NOT COMPATIBLE WITH RHD VEHICLES
    Show More Show Less

    Precision Raceworks - Corporate Logo
    T#:47679241
    Part#: 201-0133
    Ships in 9 Business Days
    $ 34.99 USD
    Free Shipping on orders $49 and up
    The Precision Raceworks BMW E9x/E8x T-Map Extension Harness is an excellent way to extend the length of your existing harness for the charge pipe T-Map sensor without having to cut and splice any wires. Additionally, this harness adapts your OEM map sensor wire to a 3.5 bar map sensor connector. An absolute must for Forward Facing Manifolds and Charge Pipes from Precision Raceworks or any other company offering a pipe that relocates the map sensor, resulting in the need to extend the harness.
    Show More Show Less
    Precision Raceworks - Corporate Logo
    T#:38229119
    Part#: 201-0092
    Ships in 10 Business Days
    $ 39.99 USD
    Free Shipping on orders $49 and up
    The Precision Raceworks Replacement Air Filters are a perfect choice when looking to replace your dirty or damaged PR inlet filters.