BMW Internal Engine Parts for BMW 7 Series F02 (2009+)

Supertech Single Groove Exhaust Valve - Priced Each

T#:21472889

Part#: BMEVI-1055S-HS

Ships in 8 Business Days

$ 55.99 USD

Add to Wish List

Qty

$ 55.99 USD

Add to Wish List

Single Groove sodium filled exhaust valves for high performance builds Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 112.9mm Stem Diam: 5.96mm

Show More Show Less

5mm Single Groove Valve Keeper - Set Of 24

T#:21604314

Part#: KPR-5.0-7S-24

In Stock

$ 72.99 USD

Add to Wish List

Qty

$ 72.99 USD

Add to Wish List

Two required per valve, for use with certain supertech valves 5.0mm single groove

ARP Performance Head Stud Kit - N54

T#:1061441

Part#: ARP-HSK-N54

Ships in 2 Business Days

$ 554.99 USD

Add to Wish List

Qty

$ 554.99 USD

Add to Wish List

Despite the fact that BMW engineers some of the worlds most revered engines, during number crunching something always has to be a compromise. One item that is always found to be a weak point- the OEM hardware. It is definitely sub-par for real performance use under high stress such as modded engines and track use. We use these fasteners on all of VAC's in-house head builds. Whenever the head is coming off, your switching to forced induction, or if you are simply prepping to drive your car hard; we highly recommend switching to far superior race-grade hardware. These Head Stud Kits greatly improve reliability; helping to eliminate movement of the of the cylinder head and intern, gasket failure caused by inferior OEM head-bolt stretch. This is the #1 cause of premature head gasket failure, especially on boosted or high output engines. Though more expensive than OEM, converting to one of VAC's head studs kits will not only give added strength and reliability when its needed most, but provides the most accurate torque readings because studs don’t “twist” into the block; all clamping forces are on one axis, and there is less force exerted on the normally stressed threads of the block. This increases block and hardware life and typically makes the head easier to properly install to the block, a blessing if your head may have to be removed more than once. Especially in the time crunch of racing, when engines are dissembled frequently, studs make removing and installing the cylinder head on to the block a much easier task. By allowing the studs to act as a guide on to the head, your head slides on and off and also ensures proper alignment of the head and gasket for the same reason. It is similar to converting your wheel-bolts to wheel-studs.

Show More Show Less

BMW N54 ARP Head Stud Kit

T#:17538610

Part#: ARP-HSK-N54-14

In Stock

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.

Show More Show Less

Ferrea High Performance Valve Spring Kit for BMW N55/S55

T#:23416526

Part#: FER-HPVSK-N55

Ships in 3 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

Maximize your N55 or S55 engine's performance with Ferrea Valve Springs and Retainers, precision components crafted from chromoly alloy. These springs undergo special thermal treatment, ensuring exceptional durability even in extreme racing conditions. Addressing issues like valve binding, breakage, and float, Ferrea valve springs are meticulously heat-treated and stress-relieved, providing stability for high-lift and high-RPM racing engines while minimizing load loss. Precision CNC machined titanium retainers offer superior strength and stability. Ferrea's Spring Seat Locators, made from 4140 chromoly alloy, guarantee precise tolerances and a flat, parallel spring pad with a hard Nitride surface treatment for exceptional toughness and anti-wear characteristics. Please note that installation requires the expertise of an engine builder.

Show More Show Less

Supertech Forged Pistons - Set Of 6

T#:21604329

Part#: P6-BMN55-84-T-6

In Stock

$ 984.99

This product was last offered at the strikethrough price on
05-21-2026

$ 904.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 984.99

This product was last offered at the strikethrough price on
05-21-2026

$ 904.99 USD

Limited Qty Sale

Add to Wish List

Supertech forged pistons are a great choice for performance engine builds! Bore: 84.00mm Over Size: STD Comp Ratio: 10.2:1 Dome dish: -10.4 Head CCs: 37cc Comp Height: 32.40mm Stroke: 89.60mm Skirt style: Slipper Design Rod Length: 141.35mm Pin Diam: 22mm Material: 4032 Application: All Motor / Turbo Ring part number: R84-GNH8400 (MUST BE PURCHASED SEPARATELY)

Show More Show Less

CP-Carrillo Pro-Xtreme Connecting Rod Set - BMW N63/S63

T#:23681818

Part#: CAR-CRS-S63-XTT

Ships in 3 Business Days

$ 2,999.99 USD

Add to Wish List

Qty

$ 2,999.99 USD

Add to Wish List

Tailored for exceptional performance, the Pro-Xtreme design is crafted to handle up to 2000 horsepower and 9500 RPM. Constructed from high-strength, aircraft-grade steel, these connecting rods feature a tapered small-end, allowing them to be paired with your OEM pistons.

Show More Show Less

Performance N55 Main Bearing Set

T#:26238415

Part#: 5150-HPMBS-N55

Ships in 3 Business Days

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

5150 High Performance Coated Main Bearing Sets are made for the demands of high performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market.

Show More Show Less

BMW N55 S55 Ferrea High Performance Valve Kit

T#:23416508

Part#: FER-HPVK-S55-T-3

Ships in 3 Business Days

$ 929.99 USD

Add to Wish List

Qty

$ 929.99 USD

Add to Wish List

Increase the power output of your N55/S55 engine with the high-performance Ferrea valve kit. Renowned as the industry's most reliable extreme-duty valves, they're meticulously crafted from aerospace-grade alloys, employing an exclusive two-step slow forging process for optimal grain flow and material structure integrity. A 48-hour heat treatment and stress-relieving process enhance molecular integrity. The valves feature avionics-quality hard chrome and a specially applied hard tip. Standard size: 32mm intake / 28mm exhaust, with a triple groove valve design. Compatible with factory valve locks ("Valve Keepers"), the kit includes 12x Intake Valves and 12x Exhaust Valves for a comprehensive engine upgrade!

Show More Show Less

CP Forged Piston Set - N63 - Pro-Xtreme 9.5:1

T#:26238409

Part#: CP-FPS-N63-XT-HD

Ships in 3 Business Days

$ 2,464.99 USD

Add to Wish List

Qty

$ 2,464.99 USD

Add to Wish List

The 5150 AutoSport Pro-Xtreme Forged Pistons, made by CP-Carrillo, are designed to handle extreme horsepower and high RPM applications for BMW N63 engines. Constructed from high-strength, aircraft-grade steel, these pistons are engineered to withstand the forces generated by high-powered engines. The Pro-Xtreme Piston design is specifically engineered to handle up to 2000 horsepower, making these pistons suitable for high-performance turbo/drag racing or street/strip applications. They are also designed to handle high engine speeds of up to 9500 RPM, which is necessary for achieving maximum power output. Each piston is precisely fabricated to meet the demands of high-performance engines using advanced manufacturing techniques such as computer-aided design (CAD) and finite element analysis (FEA). The Pro-Xtreme Pistons are designed to be durable, reliable, and capable of handling the extreme stresses and forces generated by high-horsepower and high-rpm engines. Includes: - Pistons - HD Wrist Pins - PVD Rings - Pins - Locks - Spec Sheet

Show More Show Less

CP-Carrillo Connecting Rod Set - N63/S63 Pro-Xtreme

For Use With Aftermarket Pistons Only!

T#:26238404

Part#: CAR-CRS-S63-XT

Ships in 3 Business Days

$ 2,899.99 USD

Add to Wish List

Qty

$ 2,899.99 USD

Add to Wish List

5150 AutoSport Pro-Xtreme Connecting Rods, manufactured by CP-Carrillo, are designed to handle extreme horsepower and high RPM applications for BMW N63 and S63 Engines. The Pro-Xtreme design is specifically tailored to handle up to 2000 horsepower, making them suitable for high-performance turbo/drag racing or street/strip applications. They are also designed to handle high engine speeds of up to 9500 RPM, which is necessary for achieving maximum power output. Each connecting rod is precisely engineered to meet the demands of high-performance engines using advanced manufacturing techniques such as computer-aided design (CAD) and finite element analysis (FEA). The Pro-Xtreme Connecting Rods are designed to be durable, reliable, and capable of handling the extreme stresses and forces generated by high-horsepower and high-rpm engines.

Show More Show Less

Supertech Titanium Valve Retainers - Intake - Set Of 12

T#:21604322

Part#: RET-BMN54-TI-12

Ships in 8 Business Days

$ 197.99 USD

Add to Wish List

Qty

$ 197.99 USD

Add to Wish List

7 Degree - 5mm valve stem - Single or Tripe Groove Valves

Supertech Single Groove Intake Valve - Set Of 12

T#:14783498

Part#: BMIVN-1055S-12

Ships in 5 Business Days

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

Head Diam: 32mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 104.9mm Stem Diam: 4.97mm

Supertech Titanium Valve Retainers - Exhaust - Set Of 12

T#:21604321

Part#: RET-BMN54-TE-12

Ships in 8 Business Days

$ 197.99 USD

Add to Wish List

Qty

$ 197.99 USD

Add to Wish List

7 Degree - 6mm valve stem - Single or Tripe Groove Valves

Performance Dual Valve Spring Kit with Steel Retainers - Set Of 24 ...

T#:21604308

Part#: SPRKFE20N54BE

Ships in 4 Business Days

$ 965.99 USD

Add to Wish List

Qty

$ 965.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Can be used with factory valve stem seals and keepers. InnSpr.OD: 21mm InnSpr.ID: 14.2mm Seat Pressure: 75 @ 36.5 Open Pressure: 155 @ 10 Max Lift: 12mm Coil Bind: 23.2mm Rate: 8 Kit spring: SPR-FE20BE Kit spring qty: 24 Retainer: RET-BMN54-TI (5mm) / RET-BMN54-TE (6mm) OutSpr.OD: 24.4mm OutSpr.ID: 17.6mm Retainer qty: 24

Show More Show Less

Supertech Single Groove Exhaust Valve - Set Of 12

T#:14816646

Part#: BMEVI-1055S-HS-1

In Stock

$ 660.99 USD

Add to Wish List

Qty

$ 660.99 USD

Add to Wish List

Single Groove sodium filled exhaust valve set for high performance builds Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 112.9mm Stem Diam: 5.96mm

Show More Show Less

Conical Spring Kit - Set Of 24

T#:21604309

Part#: SPRKFE20N54BE2

Ships in 5 Business Days

$ 965.99 USD

Add to Wish List

Qty

$ 965.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Can be used with factory valve stem seals and keepers. InnSpr.OD: 21mm InnSpr.ID: 14.2mm Seat Pressure: 88 @ 36.5 Open Pressure: 160 @ 10 Max Lift: 12mm Coil Bind: 23.2mm Rate: 7.25 Kit spring: SPR-FE20BE-2 Kit spring qty: 24 Retainer: RET-BMN54-TI (5mm) / RET-BMN54-TE (6mm) OutSpr.OD: 24.4mm OutSpr.ID: 17.6mm Retainer qty: 24

Show More Show Less

Elring Cylinder Head Bolt Set - F01 F02 F10 F12 F13 E70 F15 F16 F85 F...

For vehicles with a production date from 10/2011

2X Entries Into Our F80 M3 Sweepstakes

T#:596417

Part#: 11127607557

Ships on Nov 11, 2026

$ 83.87

This product was last offered at the strikethrough price on
08-26-2026

$ 77.89 USD

Add to Wish List

Qty

$ 77.89 USD

Add to Wish List

Bav Auto Crankshaft Position Sensor - Multiple BMWs

10X Entries Into Our F80 M3 Sweepstakes

T#:639826

Part#: 13627525015

Special Order: No Guaranteed ETA

$ 67.99 USD

Add to Wish List

Qty

$ 67.99 USD

Add to Wish List

This crankshaft position sensor provides the ECU with the engine speed signal. It is mounted in either the engine block or the bell housing of the transmission on most cars. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Intake Valve - Black Nitride - Oversize

T#:21505753

Part#: BMIVN-1054S-1

Ships in 8 Business Days

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Head Diam: 31.9mm (+0.5mm) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 106.7mm Stem Diam: 4.96mm

Exhaust Valve - Sodium Filled - Oversize

T#:21505757

Part#: BMEVI-1054S-HS-1

In Stock

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Head Diam: 28.50m (+0.5mm) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 114.9mm Stem Diam: 5.95mm

Forged Connecting Rods - Sold Each

T#:21604327

Part#: CR-BMN55-H144.35

Special Order: No Guaranteed ETA

$ 198.99 USD

Add to Wish List

Qty

$ 198.99 USD

Add to Wish List

Supertech forged rods are a great choice for performance engine builds! These rods come with ARP 2000 hardware and are designed for high powered N55/S55 applications. H-Beam design Forged 4340 alloy Center to center: 144.35mm Be bore: 53.6mm Be width: 20.88 Pe bore: 22mm full float Pe width: 20.88mm tapered ARP 2000 - 3/8" x 1.600" bolts

Show More Show Less

Performance Conical Valve Spring - Sold Each

T#:21472894

Part#: SPR-FE20BE

In Stock

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 75 @ 37 Open Pressure: 155 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm Rate: 8 OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm

Show More Show Less

WPC Treated Cam Bearing Ledge - Exhaust - BMW N52 2.0L N54 N55 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:585946

Part#: 11127531224WPC

In Stock

$ 916.99 USD

Add to Wish List

Qty

$ 916.99 USD

Add to Wish List

A common issue on N54 motors is cam bearing ledge scoring due to lack of lubrication, and if left unattended can cause damage to the camshaft and increase oil consumption. These WPC-treated cam bearing ledges help prevent lubrication issues to ensure no scoring occurs on the bearing ledge or camshaft. What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both.

Show More Show Less

BMW N52 N54 Collar Screw

10X Entries Into Our F80 M3 Sweepstakes

T#:17871157

Part#: 11367524954

In Stock

Sale - Save 20% $ 5.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4.79 USD

Add to Wish List

Qty

Sale - Save 20%

$ 5.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4.79 USD

Add to Wish List

Holds the camshaft gear to the camshaft, measures M10X1X94.

Intake Valve - Black Nitride

T#:21505752

Part#: BMIVN-1054S

In Stock

$ 25.99

This product was last offered at the strikethrough price on
06-08-2026

$ 23.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 25.99

This product was last offered at the strikethrough price on
06-08-2026

$ 23.99 USD

Limited Qty Sale

Add to Wish List

Head Diam: 31.40mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 106.7mm Stem Diam: 4.96mm

Exhaust Valve - Sodium Filled - Std Size

T#:21505756

Part#: BMEVI-1054S-HS

In Stock

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 114.9mm Stem Diam: 5.95mm

Exhaust Valve Set - Sodium Filled - Oversize

T#:21505765

Part#: BMEVI1054SHS-1KT

In Stock

$ 660.99 USD

Add to Wish List

Qty

$ 660.99 USD

Add to Wish List

Head Diam: 28.50m (+0.5mm) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 114.9mm Stem Diam: 5.95mm

WPC Treated Cam Bearing Ledge Kit - BMW N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:14651263

Part#: 11127550913WKT

In Stock

$ 1,815.99 USD

Add to Wish List

Qty

$ 1,815.99 USD

Add to Wish List

A common issue on N54 motors is cam bearing ledges scoring due to lack of lubrication, and if left unattended can cause damage to the camshafts and increase oil consumption. These WPC-treated cam bearing ledges help prevent lubrication issues to ensure no scoring occurs on the bearing ledge or camshaft. What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both.

Show More Show Less

WPC Treated Cam Bearing Ledge - Intake - BMW N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:585945

Part#: 11127550913WPC

In Stock

$ 898.99 USD

Add to Wish List

Qty

$ 898.99 USD

Add to Wish List

A common issue on N54 motors is cam bearing ledge scoring due to lack of lubrication, and if left unattended can cause damage to the camshaft and increase oil consumption. These WPC-treated cam bearing ledges help prevent lubrication issues to ensure no scoring occurs on the bearing ledge or camshaft. What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both.

Show More Show Less

WPC Treated Genuine BMW Bearings - Single Bearing

10X Entries Into Our F80 M3 Sweepstakes

T#:5470995

Part#: 11247617339WPC

In Stock

Sale - Save 31% $ 61.99

This product was last offered at the strikethrough price on
05-03-2026

$ 42.63 USD

Add to Wish List

Qty

Sale - Save 31%

$ 61.99

This product was last offered at the strikethrough price on
05-03-2026

$ 42.63 USD

Add to Wish List

Performance Rod Bearing Set - N55

T#:26238416

Part#: 5150-HPRBS-N55

Ships in 3 Business Days

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

5150 High Performance Coated Rod Bearing Sets are made for the demands of high performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market.

Show More Show Less

Elring Cylinder Head Bolt Set - F01 F02 F10 F12 F13 E70 E71

For vehicles with a production date up to 10/2011

2X Entries Into Our F80 M3 Sweepstakes

T#:596414

Part#: 11127582454

Ships in 1 Business Day

$ 143.90

This product was last offered at the strikethrough price on
08-26-2026

$ 132.08 USD

Add to Wish List

Qty

$ 132.08 USD

Add to Wish List

One time use torque-to-yield cylinder head bolts. Always replace as a set whenever cylinder head is removed and reinstalled.

BMW N54 3.0L CP-Carrillo Heavy Duty Wrist Pins

T#:25473980

Part#: CP-PP-HD-N54-6KT

Ships in 3 Business Days

$ 233.99 USD

Add to Wish List

Qty

$ 233.99 USD

Add to Wish List

BMW N54 3.0L CP-Carrillo Heavy Duty Wrist Pins are engineered to enhance the performance and reliability of your BMW's engine. Designed specifically for the N54 3.0L engine, these heavy-duty wrist pins provide superior strength and durability under high-stress conditions. With CP-Carrillo's reputation for high-quality performance parts, these wrist pins ensure your engine operates at its best, delivering exceptional power and longevity.

Superior strength for high-stress conditions
Enhanced engine performance and reliability
Designed specifically for BMW N54 3.0L engines
High-quality construction by CP-Carrillo
Improves engine longevity and durability

Show More Show Less

BMW N55/S55 Valves By Super Tech

T#:39329323

Part#: SUP-HPVK-S55-32/

Ships in 3 Business Days

$ 1,143.99 USD

Add to Wish List

Qty

$ 1,143.99 USD

Add to Wish List

Intake Valve Set - Black Nitride - Std Size

T#:21505754

Part#: BMIVN-1054SKT

Ships in 5 Business Days

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

Head Diam: 31.40mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 106.7mm Stem Diam: 4.96mm

Supertech Titanium Valve Retainers - Intake - Sold Each

T#:21604319

Part#: RET-BMN54-TI

Ships in 8 Business Days

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

7 Degree - 5mm valve stem - Single or Tripe Groove Valves

Performance Conical Valve Spring - Set Of 24

T#:21604324

Part#: SPR-FE20BE-24

Ships in 8 Business Days

$ 471.99 USD

Add to Wish List

Qty

$ 471.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 75 @ 37 Open Pressure: 155 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm Rate: 8 OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm

Show More Show Less

Performance Conical Valve Spring - Sold Each

T#:21604306

Part#: SPR-FE20BE-2

Ships in 8 Business Days

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 84 @ 37 Open Pressure: 157 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm Rate: 7.25

Show More Show Less

Supertech Titanium Valve Retainers - Exhaust - Sold Each

T#:21604320

Part#: RET-BMN54-TE

Ships in 8 Business Days

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

7 Degree - 6mm valve stem - Single or Tripe Groove Valves

Supertech Single Groove Intake Valve - Priced Each

T#:14783497

Part#: BMIVN-1055S

Ships in 8 Business Days

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Head Diam: 32mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 104.9mm Stem Diam: 4.97mm

Intake Valve Set - Black Nitride - Oversize

T#:21505755

Part#: BMIVN-1054S-1KT

Ships in 8 Business Days

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

Head Diam: 31.9mm (+0.5mm) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 106.7mm Stem Diam: 4.96mm

Performance Conical Valve Spring - Set Of 24

T#:21604325

Part#: SPR-FE20BE-2-24

Ships in 8 Business Days

$ 494.99 USD

Add to Wish List

Qty

$ 494.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 84 @ 37 Open Pressure: 157 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm Rate: 7.25

Show More Show Less

SuperTech High Performance Valve Spring Kit - 88lbs - BMW N55 S55 ...

T#:14783500

Part#: SUP-HPVSK-S55-88

Ships on Nov 10, 2026

$ 1,099.99 USD

Add to Wish List

Qty

$ 1,099.99 USD

Add to Wish List

CP-Carrillo Forged Piston Set - N54

T#:28736798

Part#: CPFPS-N54-84-9.2

Ships on Nov 11, 2026

$ 2,077.99 USD

Add to Wish List

Qty

$ 2,077.99 USD

Add to Wish List

Exhaust Valve Set - Sodium Filled - Std Size

T#:21505767

Part#: BMEVI-1054S-HSKT

Ships in 8 Business Days

$ 660.99 USD

Add to Wish List

Qty

$ 660.99 USD

Add to Wish List

Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 114.9mm Stem Diam: 5.95mm

Elring Cylinder Head Bolt Set - BMW N57 B57 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:44767341

Part#: 233.380

Ships on Nov 24, 2026

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Cylinder head bolts need to be replaced after removal. Once a bolt is torqued down, you're unable to reuse it. This set of Elring cylinder head bolts is a great option to reattach your head to the block, without paying the markup for Genuine BMW parts. Replaces BMW p/n 11128513130, 11127812925, & 11128511621

Show More Show Less

N54 Schrick Camshaft Set 268/265

T#:25739348

Part#: N54CAMSKT

Ships on Feb 12, 2027

$ 3,415.99 USD

Add to Wish List

Qty

$ 3,415.99 USD

Add to Wish List

Take your N54-powered BMW to the next level with this upgraded camshaft kit from Schrick Cams! Increasing the air allowed in and out of the motor by increasing both lift and duration over stock is one of the most effective ways to add power to your car next to adding more boost. We recommend finding a competent tuner to get the most out of your individual setup. Duration Duration Intake: 268 Duration Intake @ 1mm: 219 Duration Exhaust: 264 Duration Exhaust @ 1mm: 214 Intake Peak Timing: 125,6 Exhaust Peak Timing: -128 Lift Cam Lobe Lift Intake: 7,2 Cam Lobe Lift Exhaust: 6,54 Valve Lift Without Valve Clearance Intake: 12 Valve Lift Without Valve Clearance Exhaust: 11 Valve Clearance Intake: hydr. Valve Clearance Exhaust:

Show More Show Less

5mm Single Groove Valve Keeper - Priced Each

T#:21604312

Part#: KPR-5.0-7S

In Stock

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Two required per valve, necessary use with certain supertech valves 5.0mm single groove

CP-Carrillo Forged Piston Set - N54

Upgrade Your N54's Pistons to CP-Carrillo's Forged Piston Set!

T#:25473981

Part#: CP-FPS-N54-84

Back Ordered

Starting at $ 2,292.97 USD

Add to Wish List

Starting at $ 2,292.97 USD

Add to Wish List

CP-Carrillo sets the benchmark for premium aftermarket forged pistons. Crafted with high-strength, lightweight materials and cutting-edge engineering, this BMW N54 piston set boasts the following features: Lightweight Design: Constructed from forged aluminum alloy, CP-Carrillo pistons offer reduced weight, enhancing engine responsiveness and acceleration for a dynamic driving experience. Advanced Engineering: Leveraging state-of-the-art technology, CP-Carrillo engineers optimize combustion, fuel efficiency, and power output, ensuring peak performance in every application. Wide Configuration Range: With a variety of bore sizes and compression ratios available, CP-Carrillo provides options to tailor pistons to specific engine builds and performance objectives. Quality Construction: Each CP-Carrillo piston undergoes precision machining and rigorous testing to meet exacting standards, guaranteeing consistent quality and performance in every set. Engineered by one of motorsport's most respected names, CP-Carrillo pistons are the ultimate choice for N54 engines, whether for street performance or track dominance. Piston Sets Include: Pistons Rings Pins Locks Spec Sheet Optional Extras: Skirt Coating - Adding a Protective Layer Between the Sides of the Piston and Cylinder Walls Dome Coating - Adding a Protective Layer to the Top of The Piston HD-Wrist Pins - A Must if You are Planning on Going Beyond 850 HP! X Forging - Reducing Rotational Mass By Moving the Wristpin Inwards and Shortening it While Increasing Overall Strength Please Note: It is essential to have all engine modifications performed by a qualified professional to ensure proper installation and optimal engine performance, safety, and reliability.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Internal Engine Parts for BMW 7 Series F02 (2009+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results