BMW Internal Engine Parts for BMW 7 Series F02 (2009+)

Clear BMW chassis

Please ensure your correct model is selected

Rebuilding your engine or giving your cylinder head an overhaul? Internal engine components covers parts that are located within the engine block and cylinder head. Examples include: timing chains and tensioners, rocker arms, rod bolts and studs, head bolts, valve springs, connecting rods, and more. These are Genuine BMW engine parts, performance upgrades, or approved aftermarket brands that have a long track record of reliability and quality.

Sub-Categories

Sort By:
ARP Performance Head Stud Kit - N54
ARP Performance Head Stud Kit - N54
VAC Motorsports - Corporate Logo
T#:1061441
Part#: ARP-HSK-N54
Ships in 2 Business Days
$ 554.99 USD
Free Shipping
Add to Wish List
$ 554.99 USD
Free Shipping
Add to Wish List
Despite the fact that BMW engineers some of the worlds most revered engines, during number crunching something always has to be a compromise. One item that is always found to be a weak point- the OEM hardware. It is definitely sub-par for real performance use under high stress such as modded engines and track use. We use these fasteners on all of VAC's in-house head builds. Whenever the head is coming off, your switching to forced induction, or if you are simply prepping to drive your car hard; we highly recommend switching to far superior race-grade hardware. These Head Stud Kits greatly improve reliability; helping to eliminate movement of the of the cylinder head and intern, gasket failure caused by inferior OEM head-bolt stretch. This is the #1 cause of premature head gasket failure, especially on boosted or high output engines. Though more expensive than OEM, converting to one of VAC's head studs kits will not only give added strength and reliability when its needed most, but provides the most accurate torque readings because studs don’t “twist” into the block; all clamping forces are on one axis, and there is less force exerted on the normally stressed threads of the block. This increases block and hardware life and typically makes the head easier to properly install to the block, a blessing if your head may have to be removed more than once. Especially in the time crunch of racing, when engines are dissembled frequently, studs make removing and installing the cylinder head on to the block a much easier task. By allowing the studs to act as a guide on to the head, your head slides on and off and also ensures proper alignment of the head and gasket for the same reason. It is similar to converting your wheel-bolts to wheel-studs.
Show More Show Less
BMW N54 ARP Head Stud Kit
BMW N54 ARP Head Stud Kit
VAC Motorsports - Corporate Logo
T#:17538610
Part#: ARP-HSK-N54-14
In Stock
$ 599.99 USD
Free Shipping
Add to Wish List
$ 599.99 USD
Free Shipping
Add to Wish List
The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.
Show More Show Less
Ferrea High Performance Valve Spring Kit for BMW N55/S55
Ferrea High Performance Valve Spring Kit for BMW N55/S55
5150 Autosport - Corporate Logo
T#:23416526
Part#: FER-HPVSK-N55
Ships in 3 Business Days
$ 1,049.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 1,049.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Maximize your N55 or S55 engine's performance with Ferrea Valve Springs and Retainers, precision components crafted from chromoly alloy. These springs undergo special thermal treatment, ensuring exceptional durability even in extreme racing conditions. Addressing issues like valve binding, breakage, and float, Ferrea valve springs are meticulously heat-treated and stress-relieved, providing stability for high-lift and high-RPM racing engines while minimizing load loss. Precision CNC machined titanium retainers offer superior strength and stability. Ferrea's Spring Seat Locators, made from 4140 chromoly alloy, guarantee precise tolerances and a flat, parallel spring pad with a hard Nitride surface treatment for exceptional toughness and anti-wear characteristics. Please note that installation requires the expertise of an engine builder.
Show More Show Less
WPC-Treated Performance Rod Bearing Service Kit - N63 / S63
WPC-Treated Performance Rod Bearing Service Kit - N63 / S63
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:36066266
Part#: 11247617338KT2
In Stock
$ 1,098.99

This product was last offered at the strikethrough price on
09-29-2026

$ 1,093.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 1,093.99 USD
Free Shipping on orders $49 and up
Add to Wish List

If your engine has higher mileage, don't neglect rod bearing replacement! These bearings are sandwiched between the connecting rod and crankshaft journal and are prone to failure due to overheating, lack of lubrication, or general wear. Replace your rod bearings and prevent a spun bearing.

Starting with ACL’s high-performance bearing shells, our Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Kit includes

Turner Motorsport WPC-Treated Race Series Rod Bearing Shells (16) Genuine BMW Connecting Rod Bolts (16) Hardware for Oil Pan & Oil Sump Oil filter Liqui-Moly Molygen 5W-40 (6L) Drain Plug Turner Motorsport Oil Reminder Sticker Oil pan gasket RedLine assembly lube (4 oz.)

Show More Show Less
Victor Reinz Cylinder Head Bolts - N54
Victor Reinz Cylinder Head Bolts - N54
Victor Reinz - Corporate Logo
T#:373825
Part#: 11127574303
Ships in 1 Business Day
$ 147.99

This product was last offered at the strikethrough price on
10-12-2026

$ 134.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 134.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Head Bolt set for the N54 engines with aluminum block. 

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time. 
Show More Show Less
CP-Carrillo Pro-Xtreme Connecting Rod Set - BMW N63/S63
CP-Carrillo Pro-Xtreme Connecting Rod Set - BMW N63/S63
5150 Autosport - Corporate Logo
T#:23681818
Part#: CAR-CRS-S63-XTT
Ships in 3 Business Days
$ 2,999.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 2,999.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Tailored for exceptional performance, the Pro-Xtreme design is crafted to handle up to 2000 horsepower and 9500 RPM. Constructed from high-strength, aircraft-grade steel, these connecting rods feature a tapered small-end, allowing them to be paired with your OEM pistons.
Show More Show Less
Performance N55 Main Bearing Set
Performance N55 Main Bearing Set
5150 Autosport - Corporate Logo
T#:26238415
Part#: 5150-HPMBS-N55
Ships in 3 Business Days
$ 549.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 549.99 USD
Free Shipping on orders $49 and up
Add to Wish List
5150 High Performance Coated Main Bearing Sets are made for the demands of high performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market.
Show More Show Less
BMW N55 S55 Ferrea High Performance Valve Kit
BMW N55 S55 Ferrea High Performance Valve Kit
5150 Autosport - Corporate Logo
T#:23416508
Part#: FER-HPVK-S55-T-3
Ships in 3 Business Days
$ 929.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 929.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Increase the power output of your N55/S55 engine with the high-performance Ferrea valve kit. Renowned as the industry's most reliable extreme-duty valves, they're meticulously crafted from aerospace-grade alloys, employing an exclusive two-step slow forging process for optimal grain flow and material structure integrity. A 48-hour heat treatment and stress-relieving process enhance molecular integrity. The valves feature avionics-quality hard chrome and a specially applied hard tip. Standard size: 32mm intake / 28mm exhaust, with a triple groove valve design. Compatible with factory valve locks ("Valve Keepers"), the kit includes 12x Intake Valves and 12x Exhaust Valves for a comprehensive engine upgrade!
Show More Show Less
CP Forged Piston Set - N63 - Pro-Xtreme 9.5:1
CP Forged Piston Set - N63 - Pro-Xtreme 9.5:1
5150 Autosport - Corporate Logo
T#:26238409
Part#: CP-FPS-N63-XT-HD
Ships in 3 Business Days
$ 2,464.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 2,464.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The 5150 AutoSport Pro-Xtreme Forged Pistons, made by CP-Carrillo, are designed to handle extreme horsepower and high RPM applications for BMW N63 engines. Constructed from high-strength, aircraft-grade steel, these pistons are engineered to withstand the forces generated by high-powered engines. The Pro-Xtreme Piston design is specifically engineered to handle up to 2000 horsepower, making these pistons suitable for high-performance turbo/drag racing or street/strip applications. They are also designed to handle high engine speeds of up to 9500 RPM, which is necessary for achieving maximum power output. Each piston is precisely fabricated to meet the demands of high-performance engines using advanced manufacturing techniques such as computer-aided design (CAD) and finite element analysis (FEA). The Pro-Xtreme Pistons are designed to be durable, reliable, and capable of handling the extreme stresses and forces generated by high-horsepower and high-rpm engines. Includes: - Pistons - HD Wrist Pins - PVD Rings - Pins - Locks - Spec Sheet
Show More Show Less
CP-Carrillo Connecting Rod Set - N63/S63 Pro-Xtreme
CP-Carrillo Connecting Rod Set - N63/S63 Pro-Xtreme
For Use With Aftermarket Pistons Only!
5150 Autosport - Corporate Logo
T#:26238404
Part#: CAR-CRS-S63-XT
Ships in 3 Business Days
$ 2,899.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 2,899.99 USD
Free Shipping on orders $49 and up
Add to Wish List
5150 AutoSport Pro-Xtreme Connecting Rods, manufactured by CP-Carrillo, are designed to handle extreme horsepower and high RPM applications for BMW N63 and S63 Engines. The Pro-Xtreme design is specifically tailored to handle up to 2000 horsepower, making them suitable for high-performance turbo/drag racing or street/strip applications. They are also designed to handle high engine speeds of up to 9500 RPM, which is necessary for achieving maximum power output. Each connecting rod is precisely engineered to meet the demands of high-performance engines using advanced manufacturing techniques such as computer-aided design (CAD) and finite element analysis (FEA). The Pro-Xtreme Connecting Rods are designed to be durable, reliable, and capable of handling the extreme stresses and forces generated by high-horsepower and high-rpm engines.
Show More Show Less
Victor Reinz Cylinder Head Bolt Set - BMW N63 S63
Victor Reinz Cylinder Head Bolt Set - BMW N63 S63
For vehicles with a production date up to 10/2011
Victor Reinz - Corporate Logo
T#:27672116
Part#: 11127582454
Ships in 1 Business Day
$ 55.99

This product was last offered at the strikethrough price on
05-07-2026

$ 48.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 48.99 USD
Free Shipping on orders $49 and up
Add to Wish List
One time use torque-to-yield cylinder head bolts. Always replace as a set whenever cylinder head is removed and reinstalled.
N54 Crank Hub Service Kit - Up To 02/2011
N54 Crank Hub Service Kit - Up To 02/2011
For vehicles with production date up to 02/2011
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:2227021
Part#: N54PRCRANKT
In Stock
Sale - Save 3% $ 156.99

This product was last offered at the strikethrough price on
05-03-2026

$ 151.69 USD
Free Shipping
Add to Wish List
Sale - Save 3%
$ 156.99

This product was last offered at the strikethrough price on
05-03-2026

$ 151.69 USD
Free Shipping
Add to Wish List
All of the components necessary for service when upgrading to an aftermarket crank hub solution.
Eccentric Shaft Replacement Kit - N55/S55
Eccentric Shaft Replacement Kit - N55/S55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:21735862
Part#: CAMGSKTN55S55KT
In Stock
$ 1,209.99

This product was last offered at the strikethrough price on
08-24-2026

$ 1,208.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 1,208.99 USD
Free Shipping on orders $49 and up
Add to Wish List
When it comes to optimizing the performance and longevity of your BMW N55 or S55 engine, few upgrades can rival the impact of replacing the camshaft, bearings, and gaskets. These essential components play a pivotal role in your engine's overall health and performance, and upgrading them can deliver a host of benefits, from increased power to enhanced reliability. In this article, we'll explore the advantages of investing in these critical upgrades for your BMW N55 or S55 engine. Improved Performance: Upgrading your BMW N55 or S55 engine with a new camshaft can significantly boost its performance. A high-quality camshaft can optimize valve timing, leading to improved airflow and combustion efficiency. This, in turn, results in increased horsepower and torque, providing you with a more exhilarating driving experience. If you're seeking that extra punch when you hit the gas pedal, a new camshaft is the way to go. Enhanced Durability: The camshaft, bearings, and gaskets are fundamental components of your engine's internal structure. Over time, wear and tear can cause these parts to degrade, potentially leading to catastrophic engine failure. By replacing these components with high-quality, performance-oriented alternatives, you're not only increasing horsepower but also reinforcing the engine's durability. This can help prevent costly breakdowns and extend the life of your BMW engine. Optimal Efficiency: Efficiency is a key factor in engine performance. Worn-out bearings and gaskets can lead to oil leaks and reduced engine efficiency. Replacing them ensures a tighter seal, minimizing oil leaks and maintaining the proper lubrication for all moving parts. This leads to better fuel efficiency and a smoother, more reliable engine operation, all while reducing maintenance costs in the long run. Increased Resale Value: Investing in high-quality components like camshafts, bearings, and gaskets not only enhances your driving experience but also adds value to your BMW. When it's time to sell or trade-in your vehicle, potential buyers or dealerships will recognize the value of these upgrades, making your car more desirable and potentially increasing its resale value. Kit for All N55/S55 Engines
Show More Show Less
Eccentric Shaft Replacement Kit
Eccentric Shaft Replacement Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:22789670
Part#: S55SHAFTRPCKT
In Stock
$ 1,209.99

This product was last offered at the strikethrough price on
08-24-2026

$ 1,208.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 1,208.99 USD
Free Shipping on orders $49 and up
Add to Wish List

Ensure the peak performance of your BMW N55 or S55 engine with Turner Motorsport's Eccentric Shaft Replacement Kit. This all-inclusive kit features essential components, including:

  • Camshaft
  • Eccentric Shaft Bearing
  • Valve Cover Gasket Set
  • Gasket

Designed for precision and durability, this kit guarantees optimal engine performance and longevity. Rely on Turner Motorsport for top-quality replacement parts that adhere to the highest standards.

Show More Show Less
Bav Auto Crankshaft Position Sensor - Multiple BMWs
Bav Auto Crankshaft Position Sensor - Multiple BMWs
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:639826
Part#: 13627525015
Special Order: No Guaranteed ETA
$ 67.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 67.99 USD
Free Shipping on orders $49 and up
Add to Wish List
This crankshaft position sensor provides the ECU with the engine speed signal. It is mounted in either the engine block or the bell housing of the transmission on most cars. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less
OEM Ina Intake Hydraulic Tappet - BMW N52 N54 N55 N20 S55
OEM Ina Intake Hydraulic Tappet - BMW N52 N54 N55 N20 S55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:591661
Part#: 11337548690
In Stock
$ 15.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 15.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Hydraulic valve lifter
BMW N52 N54 Collar Screw
BMW N52 N54 Collar Screw
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:17871157
Part#: 11367524954
In Stock
Sale - Save 20% $ 5.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4.79 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 20%
$ 5.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4.79 USD
Free Shipping on orders $49 and up
Add to Wish List
Holds the camshaft gear to the camshaft, measures M10X1X94.
Performance Rod Bearing Set - N55
Performance Rod Bearing Set - N55
5150 Autosport - Corporate Logo
T#:26238416
Part#: 5150-HPRBS-N55
Ships in 3 Business Days
$ 399.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 399.99 USD
Free Shipping on orders $49 and up
Add to Wish List
5150 High Performance Coated Rod Bearing Sets are made for the demands of high performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market.
Show More Show Less
Timing Chain Kit - N57
Timing Chain Kit - N57
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:58271030
Part#: 13528490225KT
Ships in 1 Business Day
New Item
$ 1,331.99

This product was last offered at the strikethrough price on
10-11-2026

$ 1,313.99 USD
Add to Wish List
$ 1,313.99 USD
Add to Wish List
The Turner Motorsport N57 Timing Chain Kit provides complete timing restoration for BMW N57 diesel engines to correct premature factory chain failure. The comprehensive replacement package supplies OEM chains, tensioners, guides, sprockets, and Elring sealing components to ensure precision synchronization. Complete the N57 service utilizing the supplied Hengst filtration, LiquiMoly Top-Tec 5W-40 oil, and BMW G48 coolant.
Show More Show Less
OEM INA Rocker Arm - BMW N20 2.0L, N52 N54 3.0L
OEM INA Rocker Arm - BMW N20 2.0L, N52 N54 3.0L
Ina - Corporate Logo
T#:41492602
Part#: 11337559797
In Stock
$ 22.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 22.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Rocker arms work in conjunction with your camshafts and valves, applying pressure from the camshaft to open and close your intake and exhaust valves. If your rocker arm rollers have failed, this can lead to extreme camshaft damage, requiring the camshaft to be replaced. Replace your rockers whenever servicing your camshafts or replacing your hydraulic lifters to ensure long-term engine reliability.
Show More Show Less
BMW N54 3.0L CP-Carrillo Heavy Duty Wrist Pins
BMW N54 3.0L CP-Carrillo Heavy Duty Wrist Pins
5150 Autosport - Corporate Logo
T#:25473980
Part#: CP-PP-HD-N54-6KT
Ships in 3 Business Days
$ 233.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 233.99 USD
Free Shipping on orders $49 and up
Add to Wish List

BMW N54 3.0L CP-Carrillo Heavy Duty Wrist Pins are engineered to enhance the performance and reliability of your BMW's engine. Designed specifically for the N54 3.0L engine, these heavy-duty wrist pins provide superior strength and durability under high-stress conditions. With CP-Carrillo's reputation for high-quality performance parts, these wrist pins ensure your engine operates at its best, delivering exceptional power and longevity.

  • Superior strength for high-stress conditions
  • Enhanced engine performance and reliability
  • Designed specifically for BMW N54 3.0L engines
  • High-quality construction by CP-Carrillo
  • Improves engine longevity and durability
Show More Show Less
BMW N55/S55 Valves By Super Tech
BMW N55/S55 Valves By Super Tech
5150 Autosport - Corporate Logo
T#:39329323
Part#: SUP-HPVK-S55-32/
Ships in 3 Business Days
$ 1,143.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 1,143.99 USD
Free Shipping on orders $49 and up
Add to Wish List
N54 Crank Hub Service Kit - From 02/2011
N54 Crank Hub Service Kit - From 02/2011
For vehicles with production date from 02/2011
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:2227020
Part#: N54POCRANKT
In Stock
Sale - Save 3% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 146.61 USD
Free Shipping
Add to Wish List
Sale - Save 3%
$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 146.61 USD
Free Shipping
Add to Wish List
All of the components necessary for service when upgrading to an aftermarket crank hub solution.
CP-Carrillo Forged Piston Set - N54
CP-Carrillo Forged Piston Set - N54
VAC Motorsports - Corporate Logo
T#:28736798
Part#: CPFPS-N54-84-9.2
Ships on Nov 11, 2026
$ 2,077.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 2,077.99 USD
Free Shipping on orders $49 and up
Add to Wish List
CP-Carrillo Forged Piston Set - N54
CP-Carrillo Forged Piston Set - N54
Upgrade Your N54's Pistons to CP-Carrillo's Forged Piston Set!
5150 Autosport - Corporate Logo
T#:25473981
Part#: CP-FPS-N54-84
Back Ordered
Starting at $ 2,292.97 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 2,292.97 USD
Free Shipping on orders $49 and up
Add to Wish List
CP-Carrillo sets the benchmark for premium aftermarket forged pistons. Crafted with high-strength, lightweight materials and cutting-edge engineering, this BMW N54 piston set boasts the following features: Lightweight Design: Constructed from forged aluminum alloy, CP-Carrillo pistons offer reduced weight, enhancing engine responsiveness and acceleration for a dynamic driving experience. Advanced Engineering: Leveraging state-of-the-art technology, CP-Carrillo engineers optimize combustion, fuel efficiency, and power output, ensuring peak performance in every application. Wide Configuration Range: With a variety of bore sizes and compression ratios available, CP-Carrillo provides options to tailor pistons to specific engine builds and performance objectives. Quality Construction: Each CP-Carrillo piston undergoes precision machining and rigorous testing to meet exacting standards, guaranteeing consistent quality and performance in every set. Engineered by one of motorsport's most respected names, CP-Carrillo pistons are the ultimate choice for N54 engines, whether for street performance or track dominance. Piston Sets Include: Pistons Rings Pins Locks Spec Sheet Optional Extras: Skirt Coating - Adding a Protective Layer Between the Sides of the Piston and Cylinder Walls Dome Coating - Adding a Protective Layer to the Top of The Piston HD-Wrist Pins - A Must if You are Planning on Going Beyond 850 HP! X Forging - Reducing Rotational Mass By Moving the Wristpin Inwards and Shortening it While Increasing Overall Strength ​ Please Note: It is essential to have all engine modifications performed by a qualified professional to ensure proper installation and optimal engine performance, safety, and reliability.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping