BMW Maintenance & Tune-Up Parts for BMW 7 Series F02 (2009+)

N54/N55/S55/N52/N20/N26 Magnetic Billet Oil Filter Housing Cap - Blac...

T#:5269536

Part#: OILCAPNXXS55BLA

Ships in 4 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.

Show More Show Less

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Brushed Finish - ...

T#:1002349

Part#: 228053410

Back Ordered

$ 314.99 USD

Add to Wish List

Qty

$ 314.99 USD

Add to Wish List

When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED

Show More Show Less

Magnetic Billet Oil Filter Housing Cap For N54/N55/S55/N52/N20/N26 - ...

T#:5269538

Part#: OILCAPNXXS55BLU

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.

Show More Show Less

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Raw Finish - BMW ...

T#:1002348

Part#: 228053400

Back Ordered

$ 296.99 USD

Add to Wish List

Qty

$ 296.99 USD

Add to Wish List

When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED

Show More Show Less

Magnetic Billet Oil Filter Housing Cap For N54/N55/S55/N52/N20/N26 - ...

T#:5269535

Part#: OILCAPNXXS55POL

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.

Show More Show Less

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Black Finish - BM...

T#:1002350

Part#: 228053420

Back Ordered

$ 314.99 USD

Add to Wish List

Qty

$ 314.99 USD

Add to Wish List

When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED

Show More Show Less

Walnut Blaster Vacuum Adapter - Plastic

T#:578638

Part#: B1100004

In Stock

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

BMW F8X E6X Oil Filter Housing Cap Magnetic Billet - Red Anodized ...

T#:5269537

Part#: OILCAPNXXS55RED

Ships in 4 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.

Show More Show Less