Cylinder Head for BMW 7 Series F02 (2009+)

Clear BMW chassis

BMW makes their cylinder heads from aluminum. While this is beneficial for many reason, they do not react well to overheating. Especially prevalent on older BMW engines, and over-temp situation has been known to cause the head to warp. Turner Motorsport carries Genuine BMW replacement heads and parts to make your next rebuild a success.

Sub-Categories

Sort By:

ARP Performance Head Stud Kit - N54

T#:1061441

Part#: ARP-HSK-N54

Ships in 6 Business Days

$ 554.99 USD

Add to Wish List

Qty

$ 554.99 USD

Add to Wish List

Despite the fact that BMW engineers some of the worlds most revered engines, during number crunching something always has to be a compromise. One item that is always found to be a weak point- the OEM hardware. It is definitely sub-par for real performance use under high stress such as modded engines and track use. We use these fasteners on all of VAC's in-house head builds. Whenever the head is coming off, your switching to forced induction, or if you are simply prepping to drive your car hard; we highly recommend switching to far superior race-grade hardware. These Head Stud Kits greatly improve reliability; helping to eliminate movement of the of the cylinder head and intern, gasket failure caused by inferior OEM head-bolt stretch. This is the #1 cause of premature head gasket failure, especially on boosted or high output engines. Though more expensive than OEM, converting to one of VAC's head studs kits will not only give added strength and reliability when its needed most, but provides the most accurate torque readings because studs don’t “twist” into the block; all clamping forces are on one axis, and there is less force exerted on the normally stressed threads of the block. This increases block and hardware life and typically makes the head easier to properly install to the block, a blessing if your head may have to be removed more than once. Especially in the time crunch of racing, when engines are dissembled frequently, studs make removing and installing the cylinder head on to the block a much easier task. By allowing the studs to act as a guide on to the head, your head slides on and off and also ensures proper alignment of the head and gasket for the same reason. It is similar to converting your wheel-bolts to wheel-studs.

Show More Show Less

BMW N54 ARP Head Stud Kit

T#:17538610

Part#: ARP-HSK-N54-14

In Stock

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.

Show More Show Less

Elring Cylinder Head Bolt Set - F01 F02 F10 F12 F13 E70 F15 F16 F85 F...

For vehicles with a production date from 10/2011

2X Entries Into Our F80 M3 Sweepstakes

T#:596417

Part#: 11127607557

Ships on Nov 19, 2026

$ 83.87

This product was last offered at the strikethrough price on
08-26-2026

$ 77.20 USD

Add to Wish List

Qty

$ 77.20 USD

Add to Wish List

OEM Ina Intake Hydraulic Tappet - BMW N52 N54 N55 N20 S55

We Price Match - Give Us A Call or Chat!

T#:591661

Part#: 11337548690

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Hydraulic valve lifter

OEM INA Rocker Arm - BMW N20 2.0L, N52 N54 3.0L

T#:41492602

Part#: 11337559797

In Stock

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Rocker arms work in conjunction with your camshafts and valves, applying pressure from the camshaft to open and close your intake and exhaust valves. If your rocker arm rollers have failed, this can lead to extreme camshaft damage, requiring the camshaft to be replaced. Replace your rockers whenever servicing your camshafts or replacing your hydraulic lifters to ensure long-term engine reliability.

Show More Show Less

Elring Cylinder Head Bolt Set - F01 F02 F10 F12 F13 E70 E71

For vehicles with a production date up to 10/2011

2X Entries Into Our F80 M3 Sweepstakes

T#:596414

Part#: 11127582454

Ships in 1 Business Day

$ 143.90

This product was last offered at the strikethrough price on
08-26-2026

$ 130.62 USD

Add to Wish List

Qty

$ 130.62 USD

Add to Wish List

One time use torque-to-yield cylinder head bolts. Always replace as a set whenever cylinder head is removed and reinstalled.

Elring Cylinder Head Bolt Set - BMW N57 B57 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:44767341

Part#: 233.380

Ships on Dec 3, 2026

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Cylinder head bolts need to be replaced after removal. Once a bolt is torqued down, you're unable to reuse it. This set of Elring cylinder head bolts is a great option to reattach your head to the block, without paying the markup for Genuine BMW parts. Replaces BMW p/n 11128513130, 11127812925, & 11128511621

Project Cars

SELECT YOUR BMW

Cylinder Head for BMW 7 Series F02 (2009+)

Sub-Categories

ARP Performance Head Stud Kit - N54

BMW N54 ARP Head Stud Kit

Elring Cylinder Head Bolt Set - F01 F02 F10 F12 F13 E70 F15 F16 F85 F...

OEM Ina Intake Hydraulic Tappet - BMW N52 N54 N55 N20 S55

OEM INA Rocker Arm - BMW N20 2.0L, N52 N54 3.0L

Elring Cylinder Head Bolt Set - F01 F02 F10 F12 F13 E70 E71

Elring Cylinder Head Bolt Set - BMW N57 B57 3.0L

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results