BMW Performance Chips & Software for BMW 7 Series F02 (2009+)

Clear BMW chassis

Please ensure your correct model is selected

Performance tuning for your BMW gives it more efficient and effective ECU mapping which favor power delivery over comfort. BMW tuning legend Jim Conforti produces incredible software tunes for nearly every model to give drivers a noticeable upgrade in their car's capabilities. The Turner Chips, Shark Injectors, Sprint Boosters, and Burger Motorsports tuning software and handheld devices are all right here for you to give your BMW the engine management change it deserves.

Sub-Categories

Sort By:

BM3 Wireless OBDII WiFi ENET CANBUS Flash Adapter - BMW F & G Chassis...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bootmod3 - Corporate Logo
T#:33746523
Part#: OBD2FA
Ships in 9 Business Days
$ 99.00 USD
Free Shipping on orders $49 and up

Introducing the latest and greatest Wireless connection method for your BMW F and G series vehicles and the 2020+ Toyota Supra, the all-new bootmod3 Wireless Adapter.

bootmod3 WiFi adapter is fully designed in-house by our engineers, built with the highest quality parts and a modern chipset. It achieves perfect reliability and is the quickest adapter currently offered on the market.

Features:

  • Fastest flash times over ENET and CANBUS
  • Reliable and consistent connectivity
  • Ability to configure your own WiFi password.

    • Most if not all other WiFi OBD adapters leave open WiFi access to your OBD port which is a security issue for your vehicle. With bootmod3 you can set/change to your own custom WiFi password securing access.
  • Wireless ENET support for BMW F and G series vehicles and 2020+ Toyota Supra
  • Wireless CANBUS Support
    • Unlike generic WiFi adapters, our adapter allows full flashing of transmission on GEN2 BMW and 2020+ Toyota Supra removing the need for additional WiFi adapters or DCAN cables
  • NO ALARMS if left plugged in (BMW G series vehicles and Toyota Supra)
    • Enters ultra-low power mode if left plugged in consuming just ~20mA
  • OTA updates through the new bootmod3 app
  • Firmware fully extensible for additional flash and diagnostic protocols for future connectivity support
  • Manual Toggle switch to fully power down the adapter
  • Small form factor, considerably smaller than generic WiFi ENET adapters
  • No VIN locking, can be used on multiple vehicles

Vehicles Supported:

  • All BMW F and G series vehicles
  • 2014+ Mini
  • 2020+ Toyota Supra (A90 A91)

Supported 3rd Party Applications:

  • OEM factory diagnostics such as ISTA and ESYS
  • XHP App
  • Bimmercode App
  • Bimmerlink App
  • ProTool App
  • ...and other apps requiring ENET and UDS to CANBUS support

When connected on iOS, copy your WiFi settings from Automatic to Manual and leave the Router field empty. This leaves your Mobile data connection active while connected with the vehicle.

Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.

Show More Show Less
Motiv ReFlex+ for BMW
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:17970629
Part#: RFXF02UI6
In Stock
$ 859.00 USD
Free Shipping on orders $49 and up
The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.
Show More Show Less
BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:28537533
Part#: 101-0216
In Stock
$ 105.00 USD
Free Shipping on orders $49 and up

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

  • Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
  • Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
  • Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
  • High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less

Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:29234298
Part#: 910.1011
In Stock
$ 479.00 USD
Free Shipping on orders $49 and up
The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.
Show More Show Less

BMS Pedal Tuner - N52, N54, N55 (Manual Transmission)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:20155613
Part#: BMSPBT-M
Ships on Jul 21, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA
Show More Show Less
Motiv ReFlex+ Control Unit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:29101684
Part#: 900.1001
In Stock
$ 729.00 USD
Free Shipping on orders $49 and up
The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.
Show More Show Less

BMW N54 JB4 2 Step / NLS Relay
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:1762259
Part#: JB4N542STEP
Ships in 1 Business Day
$ 35.00 USD
Free Shipping on orders $49 and up

BMW N54 JB4 2 Step / NLS Relay is a powerful add-on for BMW N54 engines that enables your JB4 to “2-step” by cycling power to the ignition coils, allowing for quick boost build-up even when the engine is not under load. Ideal for both manual and automatic transmissions, this relay is perfect for creating dramatic sound effects and for launching with manual transmissions. Additionally, it provides No Lift Shifting (NLS) capability for manual cars, enhancing performance and shifting speed.

  • Enables 2-step functionality for boost control, enhancing launch performance
  • No Lift Shifting (NLS) for seamless gear changes in manual transmissions
  • Compatible with both manual and automatic BMW N54 models
  • Easy installation with updated JB4 firmware (v32_15 for twin turbo or v13_7 for single turbo) - clutch wire no longer required
  • Requires JB4, back-end flash map, and either a BMS data cable or JB4 mobile connect kit
Show More Show Less
RaceChip XLR5 - BMW & MINI Cooper
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Race Chip - Corporate Logo
T#:38688929
Part#: 999982BMW
Special Order: No Guaranteed ETA
Sale - Save 10% $ 259.00

This product was last offered at the strikethrough price on
07-01-2026

$ 233.10 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 259.00

This product was last offered at the strikethrough price on
07-01-2026

$ 233.10 USD
Free Shipping on orders $49 and up
With the RaceChip XLR5, you can easily tune your car's throttle response via app to your taste – from a comfortable sedan to a racy sports car. That makes it the perfect add-on to our chip tuning boxes.
Show More Show Less

ReFlex+ Install Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:29267513
Part#: 400.1001
In Stock
$ 15.00 USD
Free Shipping on orders $49 and up

Pedal 2 Metal Throttle Enhancer - BMW & MINI
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AFE - Corporate Logo
T#:44359952
Part#: 77-20007
In Stock
Sale - Save 7% $ 268.00

This product was last offered at the strikethrough price on
06-29-2026

$ 247.90 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 268.00

This product was last offered at the strikethrough price on
06-29-2026

$ 247.90 USD
Free Shipping on orders $49 and up
No more throttle lag!
Weistec BMW N63 W.1 ECU Tune
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Weistec - Corporate Logo
T#:22690736
Part#: 05-463-00097-4KT
Ships on Jul 21, 2026
$ 1,599.00 USD
Free Shipping on orders $49 and up
Increase of +120 Horsepower, and +130 Torque! Eliminate top speed limiter, Increased throttle response. W.1 Tunes are designed for completely stock vehicles with no other modifications!
Weistec BMW N63 W.2 ECU Tune
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Weistec - Corporate Logo
T#:22690737
Part#: 05-463-00098-5KT
Ships on Jul 21, 2026
$ 1,699.00 USD
Free Shipping on orders $49 and up
Increase of +155 Horsepower, and +150 Torque! Eliminate top speed limiter, Increased throttle response. W.2 Tunes are designed for vehicles with performance exhausts & high-flow air filters!


ReFlex Lite: Advanced Sequential Injector Controller - V8
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:29234300
Part#: 910.1012
Ships in 4 Business Days
$ 499.00 USD
Free Shipping on orders $49 and up
The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for v-8 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.
Show More Show Less