Home
Engine Parts
Fuel System

BMW Fuel System Parts for BMW 7 Series F02 (2009+)

Clear BMW chassis

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

Sub-Categories

Sort By:

VTT BMW N54 “DI Injector” Delete Kit

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:11497326

Part#: VTT-N54-DI-DELET

Ships in 2 Business Days

$ 339.99 USD

Add to Wish List

Qty

$ 339.99 USD

Add to Wish List

Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following 6 – 310 Stainless DI Delete fittings 3 – Hold down brackets Completetion of this kit will require the purchase of HPFP delete plate - ES# 4623950 PLEASE NOTE: THIS KIT REQUIRES EXTENSIVE MODIFICATIONS TO CONVERT YOUR ENGINE TO PI ONLY. THIS INCLUDES BUT IS NOT LIMITED TO A FULL PORT INJECTION SOLUTION, AND STAND-ALONE TO RUN THE PI SYSTEM. WE RECOMMEND THIS PNP SYSTEM USING THE MAXX ECU IT PROVIDES ALL YOU NEED TO GET UP AND RUNNING WITH PI ONLY ON THE TUNING SIDE OF THINGS – https://www.pnpecu.com/pnpecu-maxxecu-n54-pnp-kit-437-p.asp

Show More Show Less

VTT N54 Vacuum Pump Block Off Plate

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:11497328

Part#: VTT-N54-VACUUM-B

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand

Show More Show Less

Fuel-It! Port Injection Kit With Intake Manifold, 950cc Injectors & F...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:26038558

Part#: BMW-N54-PRM-950

In Stock

$ 1,088.00 USD

Add to Wish List

Qty

$ 1,088.00 USD

Add to Wish List

MTX-D: Ethanol Content % And Fuel Temperature Gauge

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:22558994

Part#: INN3904

In Stock at Vendor

14% off MSRP $ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

Qty

14% off MSRP

$ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

Introducing the Innovate Motorsports MTX Digital Series "Dual Function" Gauges – now available! These 2 1/16" (52mm) gauges come with interchangeable faceplates and bezels, locking connectors for simplified installation, and MTS serial connections for seamless integration with other Innovate devices for data logging.

DISPLAY RANGE

Ethanol Content %: 0-100%
Temperature: -40-257 °F (-40-125°C)

KEY FEATURES

Ethanol Content
Error reporting for ethanol content sensor (Digital Display)
Fuel Temperature
Customizable exterior LED display
Programmable exterior LED color options
Selectable unit of measure in °F or °C
Programmable fuel temperature warning (outer LED)
2-Configurable analog outputs
Ethanol Content: 0v = 0%, 5v = 100%
Fuel Temperature: 0v = -40 °F, 5v = 257 °F (-40-125°C)

MTX-D: Ethanol Content Percentage & Fuel Temp Gauge Kit includes Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Harness, Program Cable (Serial), Ethanol Content Sensor, Quick Start Installation Guide.

Please note that this is a universal fitment gauge, and installation may vary depending on the vehicle.

Show More Show Less

Nostrum Stage 2 DI Injectors - S55/N55

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:9609825

Part#: H703-1257

Special Order: No Guaranteed ETA

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Stage 2 Injectors from Nostrum performance are an absolute must-have for those building big power N55 or S55 vehicles. While there are other injection methods out there - this is the OE upgrade we've all been looking for. These upgraded injectors are a seamless integration and provide the ability to deliver 55% more fuel than stock injectors.

Show More Show Less

O-Ring 2,8x1,5 FPM SH70

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:15081503

Part#: 13537794553

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Replace your Injector o-rings whenever you change your injectors!

Injector Seal

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:15015295

Part#: 13537591006

In Stock

$ 4.39 USD

Add to Wish List

Qty

$ 4.39 USD

Add to Wish List

Replace your injector o-rings when replacing your injectors or any sort of rebuild or refresh.

BMW N54 N63 N74 Injector Seal - Priced Each

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:6460319

Part#: 13537584315

In Stock

$ 3.85 USD

Add to Wish List

Qty

$ 3.85 USD

Add to Wish List

BMW N54 N63 N74 Injector Seal is a crucial component for maintaining the performance and efficiency of your BMW's fuel injection system. This high-quality seal, located at the end of the injector, ensures a tight fit, preventing fuel leaks and maintaining optimal engine operation. Each seal is sold individually, with one required per injector, making it an essential part of any injector maintenance or replacement.

Precision Fit: Specifically designed for BMW N54, N63, and N74 engines.
Prevents Fuel Leaks: Ensures a secure seal at the injector tip.
Maintains Engine Efficiency: Helps maintain optimal engine performance by preventing air and fuel leaks.
High-Quality Material: Made from durable materials for long-lasting performance.
Easy Replacement: Direct fitment for hassle-free installation.

Show More Show Less

Fuel-It! Elite Port Injection Kit With 950cc Injectors & Fuel Line ...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:26038542

Part#: BMW-EPI-950

Ships on Nov 16, 2026

$ 1,188.00 USD

Add to Wish List

Qty

$ 1,188.00 USD

Add to Wish List

This kit is designed to enhance performance by adding six supplemental low-pressure fuel injectors, capable of supporting 1000+ WHP on E85 and similar high-performance fuels.

Crafted with precision, the manifold spacers are CNC machined and anodized to ensure durability and prolonged service life. Each kit comes complete with all necessary installation hardware, a gasket set, and a plug-and-play fuel line adapter for seamless integration.

The Elite kit stands out with its sleek black anodized finish and includes an additional return port, an upgraded fuel line, and enhanced machining to accommodate a wider range of applications, including the BMW S55 engine.

A port injection controller is not included. This is required for a complete installation.

Show More Show Less

Nostrum Flex Fuel Sensor Kit - F Chassis

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:9674477

Part#: L081-1109

Back Ordered

$ 267.00 USD

Add to Wish List

Qty

$ 267.00 USD

Add to Wish List

The sensor reads the percentage of ethanol coming from your fuel tank and reports it to the content analyzer of your choice. The kit includes a sensor pre-mounted on a bracket designed to fit your vehicle, as well as adapter lines to adapt the sensor to the factory fuel lines.

Show More Show Less

Select Vehicle

Purpose

Category

Fuel System

Brand

View All Brands

Price

Shipping