BMW 5 Series F10 (2011-2016)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Turner Motorsport - Corporate Logo
T#:339003
Part#: TENF1047F1
In Stock
Sale - Save 70% $ 499.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 149.99 USD
Free Shipping
Sale - Save 70%
$ 499.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 149.99 USD
Free Shipping

Our Race Inspired exhaust deletes the rear mufflers in the F10 M5 to allow more of the exhaust sound to be heard. We love our M5 but it's just too quiet so we looked at ways to get more of the stock exhaust to be heard. After evaluating the stock exhaust layout it was easy to see that removing the rear mufflers would accomplish what we wanted. But cutting the mufflers off is just the beginning. We then had to develop a set of pipes and design a set of tips that fit perfectly and also looked right at home on the M5 super sedan. And these M5 muffler delete pipes are the finished product.

Our axle-back exhaust is made from a 304 stainless steel tube in the same diameter as the stock exhaust and with mandrel bends for unimpeded flow. It fits with the stock hangers and is clamped to the stock exhaust pipes once the mufflers are cut off. And the entire installation can be done in about an hour with the exhaust on the car. With factory clamps, you can easily reinstall your stock mufflers or a set of Corsa Performance mufflers at any time. Our tips are also stainless in a perfectly proportioned 89mm (3.5" diameter). They fill out the rear bumper valence perfectly - not too small like stock and not boy-racer large. Tips are available in mirror silver or brushed aluminum..

The final result is that removing the stock mufflers really lets the M5 V8 sing! With the mufflers and flapper valves removed the sound on start-up is scintillating. The sound from the S63TU engine is robust and intoxicating - it just needs to be heard! From outside, the muffler-delete exhaust makes the car seem all the more impressive. From the burble at idle to the roar under full throttle there is little doubt that this is a proper M car. Inside the car during normal driving the sound is not changed much thanks to the Active Sound Design system. It's a little louder but not intrusive or irritating. Around town the car sounds much like stock but just a touch louder. The exhaust pops and burbles more with each downshift. On the highway at 70-80 cruising speeds it's as quiet as a muffled exhaust. We tried to get the exhaust to drone but only experienced it at low speeds in a high gear (i.e. - lugging the engine) which we normally wouldn't do.

Our Race Inspired M5 exhaust is perfect for enhancing and accentuating the stock sound. It lets more of the M5's soundtrack come through without extensive exhaust modifications. If you want to enjoy the M5's sound more, think of this as its volume knob turned up.

This item fits the following BMWs:
2012+ F10 BMW M5

Show More Show Less
Turner Motorsport Double Wall Straight Cut Exhaust Tip - 3.0 Inlet - ...
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:9642119
Part#: 026732TMS06-17
In Stock
Sale - Save 53% $ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 70.02 USD
Free Shipping on orders $49 and up
Sale - Save 53%
$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 70.02 USD
Free Shipping on orders $49 and up
Introducing the beautiful Brushed Stainless Straight Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed stainless finish and features a straight cut, stepped design. This brushed stainless finish will give your vehicle a classic, OE+ look!
Show More Show Less
Turner Motorsport - Corporate Logo
T#:304109
Part#: TWH9905003BLACK
In Stock
Sale - Save 53% $ 141.99

This product was last offered at the strikethrough price on
05-03-2026

$ 66.15 USD
Free Shipping on orders $49 and up
Sale - Save 53%
$ 141.99

This product was last offered at the strikethrough price on
05-03-2026

$ 66.15 USD
Free Shipping on orders $49 and up
Our 7.5mm wheel spacers are lightweight, featuring a durable coating and quick release pockets for easy removal.

Burger Motorsports - Corporate Logo
T#:54139632
Part#: BMS-TCP-BLU
Ships in 1 Business Day
New Item
$ 29.00 USD
Free Shipping on orders $49 and up

Burger Motorsports - Corporate Logo
T#:49752784
Part#: BMSS63TURACP
Ships on Aug 6, 2026
New Item
$ 140.00 USD
Free Shipping on orders $49 and up
When you’re turning up the boost on your F-Chassis M5 or M6, the factory plastic charge pipes become a known weak link. The BMS Elite Replacement Aluminum Charge Pipes eliminate that failure point with a properly engineered, motorsport-grade solution built for the S63TU twin-turbo V8. Developed by Burger Motorsports specifically for the F10 M5 and F12/F13 M6, these mandrel-bent aluminum charge pipes provide a smooth, unrestricted airflow path from the turbos to the intercoolers, improving throttle response and maintaining consistent boost under load. More importantly, they’re built to survive where the OEM plastic pipes crack, split, and blow apart — especially on tuned or hard-driven cars. CNC-machined flanges, bead-rolled ends, and high-quality silicone couplers ensure a leak-free, secure connection, while all factory sensor ports and mounting locations are retained for a true bolt-on installation. No cutting, no tuning, no compromises — just a clean, OEM-plus upgrade that delivers the reliability your S63TU needs for street, track, and everything in between.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:54388468
Part#: BMWJACKPADRED1
Ships on Aug 6, 2026
New Item
$ 19.00 USD
Free Shipping on orders $49 and up
Lifting your BMW, MINI, or GR Supra should never involve crossing your fingers and hoping you don't crush a rocker panel. Plastic factory jack points are notorious for cracking under the flat, unforgiving surface of a standard floor jack. Stop damaging your car's undercarriage and lift like a pro with this Billet Jack Pad Adapter from Burger Motorsports.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:54388469
Part#: BMWJACKPADRED2
Ships on Aug 6, 2026
New Item
$ 35.00 USD
Free Shipping on orders $49 and up
Lifting your BMW, MINI, or GR Supra should never involve crossing your fingers and hoping you don't crush a rocker panel. Plastic factory jack points are notorious for cracking under the flat, unforgiving surface of a standard floor jack. Stop damaging your car's undercarriage and lift like a pro with this Billet Jack Pad Adapter from Burger Motorsports.
Show More Show Less
Active Autowerke S63 N63 A-Flow Catted Downpipes
For 2014+ model years only
For 2014+ model years only
Active Autowerke - Corporate Logo
T#:51075079
Part#: 11-041A
Ships in 3 Business Days
New Item
$ 2,279.00 USD
Free Shipping
$ 2,279.00 USD
Free Shipping
For the BMW owner seeking increased performance without the drawbacks of a "catless" system, the Active Autowerke Aflow Catted Downpipes offer the perfect solution. These downpipes feature high-flow metallic catalytic converters that are specifically designed to maintain exhaust efficiency while preventing the dreaded Check Engine Light (CEL). Unlike track-only pipes that can produce raw fuel odors and cabin drone, the Aflow series maintains a sophisticated, refined exhaust note suitable for a luxury daily driver. Each set is custom-made in-house to ensure an exact bolt-on fit, providing a reliable solution that satisfies both the driver’s demand for power and the vehicle’s onboard diagnostic requirements. Key Features: No CEL Guarantee: Advanced Aflow catalyst technology prevents catalytic efficiency dashboard warnings. Refined Exhaust Note: Provides an aggressive V8 growl while maintaining cabin comfort for daily use. Bolt-On Installation: No cutting or welding required; replaces the bulky factory units directly. Thermal Resilience: Built to withstand the high temperatures generated by the S63 and N63 twin-turbo engines. Safe for Occupants: Reduces harmful emissions and raw exhaust odors compared to catless alternatives. Specifications: Primary Material: Brushed 304 Stainless Steel Fitting: Direct OEM Replacement (Bolt-on) Manufacturing Location: Hand-made in Miami, FL Weight Reduction: Lighter than the heavy, ceramic-core factory catalytic converters Surface Finish: Natural Stainless Lead Time: Custom made-to-order (Approx. 2 weeks)
Show More Show Less

Active Autowerke - Corporate Logo
T#:51075064
Part#: 11-093
Ships in 3 Business Days
New Item
$ 2,849.00 USD
Free Shipping
$ 2,849.00 USD
Free Shipping
The Active Autowerke Signature GESI Catted Downpipes offer the perfect balance of raw performance and street-legal refinement. Unlike "catless" alternatives that cause unpleasant fuel odors and dashboard error lights, this system utilizes EPA-registered GESI high-flow catalytic converters. These proprietary converters use precious metal loading technology to significantly reduce emissions, ensuring your BMW remains OBD2 compliant and "Check Engine Light" free. Designed as a direct bolt-on replacement for F-Chassis BMW X5M, X6M, and 550i/650i models, these downpipes feature cast upper stainless steel V-bands for a factory-perfect seal. Whether you are cruising or under wide-open throttle, the system maintains a sophisticated exhaust note while safely protecting both passengers and the environment from harmful fumes. Key Features: NO CEL Guarantee: Advanced GESI technology ensures no catalytic efficiency codes under normal operation. Refined Sound & Scent: Eliminates the "raw fuel" odor associated with track-only downpipes. 49-State Legal: EPA registered and fully OBD2 compliant (excludes California). Precision Fitment: Cast upper V-bands ensure a leak-free connection to the turbo housing. OEM Integration: Easily bolts on with no cutting, welding, or permanent vehicle modification required. Specifications: Construction: Heavy-duty 304 Stainless Steel Inlet Connection: Precision-cast V-Band flange Catalyst Size: 4.5-inch Ultra High Flow unit Efficiency: Reaches full efficiency in under 10 seconds from cold start Compliance: Fully OBD2 compliant (1996 and newer vehicles) Application Note: Requires VIN for fitment verification; not compatible with G-chassis N63B engines.
Show More Show Less