BMW Intake Parts for BMW 5 Series F10 (2011-2016)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:
Performance Intake System - F10/11/07 5 Series, F12/13/06 6 Series, E70/71 F15/16/25/26 X Series
Performance Intake System - F10/11/07 5 Series, F12/13/06 6 Series, E...
Burger Motorsports - Corporate Logo
T#:20979733
Part#: F10-N55-INT
In Stock
Starting at $ 219.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 219.00 USD
Free Shipping on orders $49 and up
Add to Wish List

In BMWs with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!

Features:

  • Adds up to 10+ Horsepower
  • Dramatic sound improvement
  • Super fast install and removal
  • Improves throttle response 
  • Retains OEM airbox base as a heat shield
  • Retains OEM cold air ducting
  • Looks great under the hood
  • Cleanable and reusable filter
  • Made in the USA
Show More Show Less
BMW F30 E9X TMAP Sensors & PNP Adapters
BMW F30 E9X TMAP Sensors & PNP Adapters
Burger Motorsports - Corporate Logo
T#:583821
Part#: 3.5 BAR TMAP
In Stock
$ 32.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 32.99 USD
Free Shipping on orders $49 and up
Add to Wish List
JB4 3.5 bar plug and play TMAP adapters
Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 N55
Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 ...
Burger Motorsports - Corporate Logo
T#:28504212
Part#: BMS35TMAP-32
Back Ordered
$ 179.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 179.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.
Show More Show Less
Dinan High Flow Drop-In Replacement Filter - BMW N55 3.0L
Dinan High Flow Drop-In Replacement Filter - BMW N55 3.0L
Call In Or Chat For Best Price!
Dinan - Corporate Logo
T#:32516360
Part#: D401-0048
In Stock
12% off MSRP $ 70.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.35 USD
Free Shipping on orders $49 and up
Add to Wish List
12% off MSRP
$ 70.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.35 USD
Free Shipping on orders $49 and up
Add to Wish List
Dinan High Flow Drop-in Replacement Filters are a direct upgrade to your factory intake system and will instantly provide better flow to assist your engine in achieving maximum performance and efficiency! While factory paper filters function admirably, they can be restrictive to performance goals given the material used. They also require being replaced numerous times during the lifespan of the vehicle which can add up to a substantial amount in maintenance costs. Limited performance and increased maintenance costs are never ideal but can be resolved effectively and economically in the case of filters. Dinan High Flow Drop-in Replacement Filters are constructed of 4 layers of cotton gauze that allow better flow and less pressure drop than the stock media. This equates to the engine not needing to work as hard to make the same or more power. Additionally, the use of oiled cotton media means that the Dinan filters are washable/reusable while still retaining excellent filtration and ensuring your engine runs clean for the duration. When upgrading to a complete Dinan intake system for best performance, is not available, possible, or within the budget, Dinan High Flow Drop-in Replacement Filters have you covered! Features & Benefits: Less restrictive and better flowing than stock allowing maximum engine performance and efficiency Direct replacement for stock air filter 4 layers of proprietary high flow oiled cotton gauze material for exceptional filtration Washable and reusable for the life of the engine Quick and easy installation
Show More Show Less
Burger Motorsport Replacement Billet Performance Intake Filter - 3.5"
Burger Motorsport Replacement Billet Performance Intake Filter - 3.5"...
Burger Motorsports - Corporate Logo
T#:28968878
Part#: 1123BMS
In Stock
$ 65.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 65.00 USD
Free Shipping on orders $49 and up
Add to Wish List

This is a replacement filter for the popular 3.5" Burger Motorsports Performance Intakes. It comes pre-oiled with blue filter oil and a new clamp.

Includes:

Reusable BMS 3.5" inverted cone performance air filter (1123) Metal clamp

Show More Show Less
Universal 10AN ORB To 3/8" Barb
Universal 10AN ORB To 3/8" Barb
Radium Engineering - Corporate Logo
T#:31522993
Part#: RAD20-0530
In Stock
$ 37.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 37.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Replacement N55 Performance Filter - Red (No Hardware)
Replacement N55 Performance Filter - Red (No Hardware)
Burger Motorsports - Corporate Logo
T#:38890883
Part#: BMSREPAFNFFR
In Stock
$ 70.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 70.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants
Show More Show Less
Burger Motorsports 2013+ TypeB 4BAR Adapter - F2X F3X N54 N55 S55
Burger Motorsports 2013+ TypeB 4BAR Adapter - F2X F3X N54 N55 S55 ...
Burger Motorsports - Corporate Logo
T#:599637
Part#: TYPEB4BARADAPTER
Back Ordered
$ 35.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 35.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716
Show More Show Less
BMC Filter Cleaning Kit
BMC Filter Cleaning Kit
BMC - Corporate Logo
T#:590913
Part#: WA250-500
In Stock
$ 24.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 24.99 USD
Free Shipping on orders $49 and up
Add to Wish List
BMS Intake - S63tu M5/M6 - Red Filters
BMS Intake - S63tu M5/M6 - Red Filters
Burger Motorsports - Corporate Logo
T#:38857245
Part#: BMS-INTAKE-F10R
In Stock
$ 399.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 399.00 USD
Free Shipping on orders $49 and up
Add to Wish List
BMS Performance Intake for BMW M5/M6 Unlock the full potential of your BMW M5/M6 with the BMS Performance Intake, engineered for maximum airflow and an aggressive turbo sound. Featuring dual high-flow inverted cone filters, this system enhances performance while retaining key OEM features like cold air ducting and lightweight heat shielding. The restrictive top-end is replaced with high-flow pipes and performance filters for optimal efficiency. Key Features & Benefits: ✅ Maximum Airflow – Dual BMS inverted cone filters improve intake efficiency ✅ Up to 10whp Gains – Noticeable power increases, especially at 25psi+ boost ✅ Faster Turbo Spool – Enhances throttle response for a more exhilarating drive ✅ OEM Integration – Maintains factory cold air ducting and heat shielding ✅ No Cutting or Drilling – Easy, fully reversible installation ✅ Complete Kit – Includes all necessary hardware for a hassle-free setup Bonus: Upgraded Charge Pipes This package also includes replacement charge pipes, identical to OEM but with a 1/8" NPT bung & cap for added versatility. 🔥 Enhance your M5/M6 with the ultimate BMS Performance Intake! 🔥
Show More Show Less
Intake - S63tu M5/M6 - Blue Filters
Intake - S63tu M5/M6 - Blue Filters
Burger Motorsports - Corporate Logo
T#:38857243
Part#: BMS-INTAKE-F10B
Ships on Aug 7, 2026
$ 399.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 399.00 USD
Free Shipping on orders $49 and up
Add to Wish List
BMS Performance Intake for BMW M5/M6 Unlock the full potential of your BMW M5/M6 with the BMS Performance Intake, engineered for maximum airflow and an aggressive turbo sound. Featuring dual high-flow inverted cone filters, this system enhances performance while retaining key OEM features like cold air ducting and lightweight heat shielding. The restrictive top-end is replaced with high-flow pipes and performance filters for optimal efficiency. Key Features & Benefits: ✅ Maximum Airflow – Dual BMS inverted cone filters improve intake efficiency ✅ Up to 10whp Gains – Noticeable power increases, especially at 25psi+ boost ✅ Faster Turbo Spool – Enhances throttle response for a more exhilarating drive ✅ OEM Integration – Maintains factory cold air ducting and heat shielding ✅ No Cutting or Drilling – Easy, fully reversible installation ✅ Complete Kit – Includes all necessary hardware for a hassle-free setup Bonus: Upgraded Charge Pipes This package also includes replacement charge pipes, identical to OEM but with a 1/8" NPT bung & cap for added versatility. 🔥 Enhance your M5/M6 with the ultimate BMS Performance Intake! 🔥
Show More Show Less
Burger Motorsports Aluminum Chargepipes - S63TU M5 M6
Burger Motorsports Aluminum Chargepipes - S63TU M5 M6
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:556806
Part#: BMS-F-M5-ACP
Ships on Aug 7, 2026
$ 229.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 229.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Though functionally identical to the stock plastic pipes, these Burger Motorsports chargepipes are an improvement in both reliability and versatility. This is due to their black gloss powder coated aluminum construction, giving them greater strength and a better appearance, and the inclusion of a 1/8" NPT bung & cap included in each pipe.
Show More Show Less
BMS Replacement Elite Aluminum Charge Pipes - S63TU M5/M6
BMS Replacement Elite Aluminum Charge Pipes - S63TU M5/M6
Burger Motorsports - Corporate Logo
T#:49752784
Part#: BMSS63TURACP
Ships on Aug 7, 2026
New Item
$ 140.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 140.00 USD
Free Shipping on orders $49 and up
Add to Wish List
When you’re turning up the boost on your F-Chassis M5 or M6, the factory plastic charge pipes become a known weak link. The BMS Elite Replacement Aluminum Charge Pipes eliminate that failure point with a properly engineered, motorsport-grade solution built for the S63TU twin-turbo V8. Developed by Burger Motorsports specifically for the F10 M5 and F12/F13 M6, these mandrel-bent aluminum charge pipes provide a smooth, unrestricted airflow path from the turbos to the intercoolers, improving throttle response and maintaining consistent boost under load. More importantly, they’re built to survive where the OEM plastic pipes crack, split, and blow apart — especially on tuned or hard-driven cars. CNC-machined flanges, bead-rolled ends, and high-quality silicone couplers ensure a leak-free, secure connection, while all factory sensor ports and mounting locations are retained for a true bolt-on installation. No cutting, no tuning, no compromises — just a clean, OEM-plus upgrade that delivers the reliability your S63TU needs for street, track, and everything in between.
Show More Show Less
Black Walnut Shell 20/30 Blast Media
Black Walnut Shell 20/30 Blast Media
Bavarian Autosport - Corporate Logo
T#:22690744
Part#: B1100051
Ships in 8 Business Days
Sale - Save 20% $ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.19 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 20%
$ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.19 USD
Free Shipping on orders $49 and up
Add to Wish List
This blast media makes DIY carbon cleaning a breeze!
Vaico Crankcase Vent Hose (3-Way Hose) - BMW F10 528i
Vaico Crankcase Vent Hose (3-Way Hose) - BMW F10 528i
Vaico - Corporate Logo
T#:41492595
Part#: 11157581815
Special Order: No Guaranteed ETA
$ 40.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 40.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Replace your cracked, split, or missing vent hose to eliminate vacuum issues and restore smooth engine operation
BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve
BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...
Burger Motorsports - Corporate Logo
T#:20815185
Part#: BMSWMITC
Ships in 5 Business Days
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA
Show More Show Less
1 Gallon Methanol Tank - Clear/White
1 Gallon Methanol Tank - Clear/White
Burger Motorsports - Corporate Logo
T#:558165
Part#: 1G-MT-CL
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 30.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less
BMS DDP5800 Water/Methanol Injection Pump
BMS DDP5800 Water/Methanol Injection Pump
Burger Motorsports - Corporate Logo
T#:20815186
Part#: BMSDDP5800
In Stock
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.
Show More Show Less
2 Gallon Low Profile Universal Methanol Tank
2 Gallon Low Profile Universal Methanol Tank
Burger Motorsports - Corporate Logo
T#:20946755
Part#: 2G-ULPMT
In Stock
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"
Show More Show Less
Burger Motorsport JB4-Compatible Water/Methanol Injection System - N20 N54/55 S55 S63 B46/48 B58
Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...
Burger Motorsports - Corporate Logo
T#:558163
Part#: BMS-WMI
Ships on Aug 7, 2026
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!
Show More Show Less
1.25 Gallon Heavy-Duty Universal Methanol Tank
1.25 Gallon Heavy-Duty Universal Methanol Tank
Burger Motorsports - Corporate Logo
T#:20946761
Part#: 1.25G-UMT-CL
Ships on Aug 7, 2026
$ 69.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 69.00 USD
Free Shipping on orders $49 and up
Add to Wish List
This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 ​Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less
Water/Methanol Injection Hose - 20'
Water/Methanol Injection Hose - 20'
Burger Motorsports - Corporate Logo
T#:21176944
Part#: BMS-WMI-IL
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
BMS Water/Methanol Injection (WMI) Solenoid W/ Filter
BMS Water/Methanol Injection (WMI) Solenoid W/ Filter
Burger Motorsports - Corporate Logo
T#:21176934
Part#: BMS-WMI-SOL
Ships on Aug 7, 2026
$ 75.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 75.00 USD
Free Shipping on orders $49 and up
Add to Wish List
This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.
Show More Show Less
WMI Inline Filter
WMI Inline Filter
Burger Motorsports - Corporate Logo
T#:21176933
Part#: BMS-WMI-FIL
Ships on Aug 7, 2026
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.
Show More Show Less
Super Atomizing Water/Methanol Injection Nozzles
Super Atomizing Water/Methanol Injection Nozzles
Burger Motorsports - Corporate Logo
T#:20815192
Part#: BMS.SA.WMI.NOZ
Ships on Aug 20, 2026
Starting at $ 40.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 40.00 USD
Free Shipping on orders $49 and up
Add to Wish List
With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! ​Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping