BMW Intake Parts for BMW 5 Series F10 (2011-2016)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

Precision Raceworks - Corporate Logo
T#:5229478
Part#: 501-0018
In Stock
$ 39.99 USD
Free Shipping on orders $49 and up
The Black Market Parts Extended Intake Manifold Studs are the same great product that come with our N54/N55/S55 Port Injection Kit. These studs are compatible with any port injection kit and can even be used with stock manifolds. Each stud is designed like factory and is removed/installed with the same e-torx socket the factory 7mm studs are removed with so no switching tools or specialty stud installers needed.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:5229488
Part#: 501-0081
In Stock
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping
The Precision Raceworks Phenolic Spacer is made in the USA from premium fiber impregnated phenolic material. With a Rockwell Hardness of 100 and a conductivity rating of 2.03 it is the perfect material for insulating between heat generating parts such as the cylinder head and other parts you wish to stay cool like the intake manifold. A phenolic spacer works by reducing heat transfer from the cylinder head to the manifold which results in reduction of intake air temperature, allowing for cooler air to enter the cylinders which is more dense and reduces chance of detonation in the cylinder. Our 1/2" phenolic spacer not only provides a thermal insulation between the cylinder head and intake plenum. It has also been designed to make use of factory O-Rings rather than messy gasket maker adhesive to ensure an air tight seal each and every time along with easy installation and removal.
Show More Show Less
Eventuri - Corporate Logo
T#:396394
Part#: EVE-FLC
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
This filter cleaning kit powers away dirt and contaminants leaving your filter in like-new condition.


BMC - Corporate Logo
T#:398705
Part#: FB647/20
In Stock at Vendor
$ 207.99 USD
Free Shipping
$ 207.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
Eventuri - Corporate Logo
T#:640792
Part#: EVE-661-G2-FTR
Ships in 3 Business Days
$ 95.00 USD
Free Shipping on orders $49 and up
Replacement filter for the Eventuri E46 M3 Carbon intake system, comes ready to install.

BMC - Corporate Logo
T#:398735
Part#: FB821/04
In Stock at Vendor
$ 130.99 USD
Free Shipping
$ 130.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:398706
Part#: FB651/20
Back Ordered
$ 92.99 USD
Free Shipping
$ 92.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

Eventuri - Corporate Logo
T#:396409
Part#: EVEF10M5INT
Ships in 2 Business Days
$ 2,395.00 USD
$ 2,395.00 USD
Eventuri was founded by true enthusiasts who had a shared passion for cars and performance, engineers that had a background in Aeronautics as well as automotive tuning. After experiencing disappointment time and time again from the claims set forth by the automotive aftermarket, they set out to raise the bar. Their goal? Set a new benchmark for intake design providing true gains, not just "claims." Designed to use the "venturi effect," Eventuri has created a unique intake system that out-performs the competition. The Venturi effect is when the smooth reduction in cross-sectional area along the length of the housing causes the airflow to increase in velocity. This means more air-flow and smoother delivery, resulting in more power. But that isn't all that sets their design apart. They also use an inverted cone filter that is decoupled from the MAF. This is done because it means the filter no longer dictates the shape of air-flow, thus creating the venturi effect. Their systems are extensively developed using cutting edge design, testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then validated at the prototype stage through volumetric airflow, intake temperature and extensive dyno testing. They strive to publish all the development information to illustrate the depths they go in bringing an intake from concept to reality. Also assuring to only use the highest quality components for style and durability Each Intake system includes: 2 Carbon Fiber Venturi housings 2 High Flow Double Cone Air Filters 2 Aluminium Cowls for smooth airflow entry Left Side Carbon Tube with integrated MAF sensor mount Right Side Carbon Tube with integrated MAF sensor mount 2 Carbon Fiber Front Scoops 2 Laser Cut Aluminium Shields with integrated flow deflectors High quality Silicon couplers with BMW specification hose clamps This part fits the following vehicles: 2010 - 2016 F10 M5
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38229122
Part#: 501-0001
In Stock
$ 12.99 USD
Free Shipping on orders $49 and up
The Black Market Parts OE-Spec Intake Manifold O-Rings kit is made with Viton capable of withstanding all fuels (including e85) as well as oils. These o-rings are made to OE specifications and are a direct replacement for the seals found in your factory intake manifold. These o-rings are also used in other BMP products such as our N54/N55 Port Injection Kit, S55 Port Injection kit, N54 Performance Intake Manifold, and N55 Performance Intake Manifold.
Show More Show Less
Eventuri - Corporate Logo
T#:399985
Part#: EVE-F10M5-PF
Ships in 5 Business Days
$ 145.00 USD
Free Shipping on orders $49 and up

Bespoke. A word that perfectly encapsulates the mindset of Eventuri. Performance parts with an obsessive attention to detail and an unyielding dedication to quality. Perfectly designed to maximize the potential of each individual vehicle and meticulously refined through rigorous testing. Eventuri offers a product that stands in a class of its own and delivers outstanding power increases without making false claims or exaggerating dyno numbers. With patented designs such as a custom velocity stack filter housing and improved ducting that guides the flow of air into the engine, to the breathtaking uniformity of the weave pattern. These are performance products for the truly discerning customer.

When it comes to styling a vehicle the proper look is one that compliments, not cheapens the inherent design. Race inspired carbon fiber completes the look and style of every BMW M-powered model and Eventuri delivers on an entirely new level. Instead of simply offering black carbon and yellow kevlar that has become the norm, Eventuri has stepped things up by offering their carbon/kevlar accessories in multiple colors. Now you can choose between Blue, Red, Orange and Yellow weave to further set your ride apart from the pack.

 

This is a high flow replacement filter. It installs the same as your factory filter but allows the same flow through a similar media as all the the intake kits offered by Eventuri.

This part fits the following vehicles:
2005 - 2010 E60 M5
2005 - 2010 E63 M6

Show More Show Less