BMW X Series F16 (2015+)

Replacement N55 Performance Filter, No Hardware

T#:3586313

Part#: REPLACEMENT-N55F

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

Designed for N55 engines
Optimizes airflow for increased power
Improves throttle response and fuel efficiency
Protects engine from contaminants

Show More Show Less

BMS Pedal Tuner - N52, N54, N55

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

For vehicles without Adaptive Cruise Control and with M Sport Package

T#:599469

Part#: LPM-BMC0133-N

Ships in 3 Business Days

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

For vehicles with Adaptive Cruise Control and M Sport Package

T#:599470

Part#: LPM-BMC0136-N

Ships in 3 Business Days

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

For use with older E chassis BMW JB4 systems with the square plastic case.

T#:403194

Part#: JB4-BT

In Stock

$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.

Show More Show Less

Universal BMW Jack Pad Red - Set Of 4

T#:9803960

Part#: BMWJACKPADRED4

Ships in 3 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
Prevents damage to rocker panels or vehicle undercarriage
Made from solid billet aluminum for durability
Engraved Burger Motorsports logo for authenticity
Honeycomb grip pattern for stability during use

Show More Show Less

Autel Universal Rubber TPMS Sensor - Set Of Four

T#:3529121

Part#: AUL1SENSORKT

In Stock

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

Burger Motorsports JB4 Tuner - N63TU - BMW F-Chassis

For F-Chassis Vehicles w/ N63TU Engine Only; Not for sale or use in California

T#:600238

Part#: JB4-N63TU-F

Ships in 8 Business Days

$ 679.00 USD

Add to Wish List

Qty

$ 679.00 USD

Add to Wish List

The JB4 is the most advanced and highly featured tuning system available for your N63 powered vehicle. Power gains are up to 100whp and 140wtq on a stock car. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. JB4 Features and Benefits Power gains of up to 100hp and 140tq to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation Includes the rugged JB4 billet aluminum enclosure for protection CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment 91 octane fuel or better required for performance gains Ethanol (E85) compatible tuning maps Able to read/delete fault codes Not VIN locked and can be removed without a trace and resold down the road Made in the USA Free USA Shipping 5 year warranty Note: For off-road racing use only. Not for sale or use in California.

Show More Show Less

MaxiBAS BT506

T#:2914145

Part#: BT506

Ships in 7 Business Days

$ 402.99 USD

Add to Wish List

Qty

$ 402.99 USD

Add to Wish List

The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b

Show More Show Less

Maxi TPMS Kit With Sensors

T#:5663676

Part#: AULTS508K1

Ships in 7 Business Days

$ 739.99 USD

Add to Wish List

Qty

$ 739.99 USD

Add to Wish List

Pinpoint and replace bad TPMS Sensors

Project Cars

SELECT YOUR BMW

Sub-Categories

Replacement N55 Performance Filter, No Hardware

Replacement N55 Performance Filter from Burger Motorsport

Key Features:

BMS Pedal Tuner - N52, N54, N55

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

Universal BMW Jack Pad Red - Set Of 4

Autel Universal Rubber TPMS Sensor - Set Of Four

Burger Motorsports JB4 Tuner - N63TU - BMW F-Chassis

MaxiBAS BT506

Maxi TPMS Kit With Sensors

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results