BMW X Series F16 (2015+)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Replacement N55 Performance Filter, No Hardware
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:3586313
Part#: REPLACEMENT-N55F
In Stock
$ 70.00 USD
Free Shipping
$ 70.00 USD
Free Shipping

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

  • Designed for N55 engines
  • Optimizes airflow for increased power
  • Improves throttle response and fuel efficiency
  • Protects engine from contaminants
Show More Show Less
BMS Pedal Tuner - N52, N54, N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:586269
Part#: BMSPBT
In Stock
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA
Show More Show Less
JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:598298
Part#: JB4-SPWCK-F
In Stock
$ 159.00 USD
Free Shipping
$ 159.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.
Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For use with older E chassis BMW JB4 systems with the square plastic case.
Burger Motorsports - Corporate Logo
T#:403194
Part#: JB4-BT
In Stock
$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.
Show More Show Less

Universal BMW Jack Pad Red - Set Of 4
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:9803960
Part#: BMWJACKPADRED4
Ships in 3 Business Days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

  • Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
  • Prevents damage to rocker panels or vehicle undercarriage
  • Made from solid billet aluminum for durability
  • Engraved Burger Motorsports logo for authenticity
  • Honeycomb grip pattern for stability during use
Show More Show Less
MMR Crank Hub Kit - N55/S55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
MMX Performance - Corporate Logo
T#:4565824
Part#: MMR20-1003FK
Ships in 3 Business Days
$ 849.99 USD
Free Shipping
$ 849.99 USD
Free Shipping
Anyone with a modified N55/S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the N55/S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a EN36 machined billet one-piece crank hub heat treated with a 0.75mm case hardening which makes it extremely durable. Due to the one-piece design, it ensures that the friction plates cannot slip. This offers a huge jump in reliability when paired with a new properly torques crank bolt. Installation is requires no drilling or modification to the OEM crankshaft ensuring a perfect fit! Included in this kit is MMR's T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. *Installation recommended by a professional shop or technician.
Show More Show Less

MMX Oil Filter Housing - Black
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
MMX Performance - Corporate Logo
T#:4552065
Part#: MMR03-0101-BL
Ships in 2 Business Days
$ 142.99 USD
Free Shipping
$ 142.99 USD
Free Shipping
If you are looking for peace of mind over the prone to cracking OEM plastic housing cap, this oil filter housing cap by MMX may be exactly what you are looking for. Composed of billet aluminum, this cap is light, durable, and dresses up your engine bay! Comes finished with a polished anodized dark anthracite coating. Installation is simple as it can be replaced while completing an oil change. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.
Show More Show Less
MMX Billet Aluminum Gear Shift Paddle Set - F-Chassis(Titanium Silver...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Automatic/DCT Vehicles with Gen 1 and 2 Performance Wheels
MMX Performance - Corporate Logo
T#:4510783
Part#: MMR04-0501-TI
Ships in 2 Business Days
$ 283.99 USD
Free Shipping
$ 283.99 USD
Free Shipping
Performance Billet Aluminum Paddle Shifter set for your F-Chassis produced by MMR Performance. Features: Aircraft Grade T-6061 Aluminum Billet Titanium Silver finish Body molding designed for the M Performance Wheel and Gen 1&2 Performance Wheels Paddles designed to make shifting easy at any steering angle. *Available in Dark Anthracite Grey see T#4510781
Show More Show Less

MMX Billet Aluminum Gear Shift Paddle Set - F-Chassis(Dark Anthracite...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Automatic/DCT Vehicles with Gen 1 and 2 Performance Wheels
MMX Performance - Corporate Logo
T#:4510781
Part#: MMR04-0501-DA
Ships in 3 Business Days
$ 283.99 USD
Free Shipping
$ 283.99 USD
Free Shipping
Performance Billet Aluminum Paddle Shifter set for your F-Chassis produced by MMX Performance. Features: Aircraft Grade T-6061 Aluminum Billet Dark Anthracite Grey finish Body molding designed for the M Performance Wheel and Gen 1&2 Performance Wheels Paddles designed to make shifting easy at any steering angle. *Available in Titanium Silver see T#4510783
Show More Show Less

Burger Motorsports JB4 Tuner - N63TU - BMW F-Chassis
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For F-Chassis Vehicles w/ N63TU Engine Only; Not for sale or use in California
Burger Motorsports - Corporate Logo
T#:600238
Part#: JB4-N63TU-F
Ships in 8 Business Days
$ 679.00 USD
Free Shipping
$ 679.00 USD
Free Shipping
The JB4 is the most advanced and highly featured tuning system available for your N63 powered vehicle. Power gains are up to 100whp and 140wtq on a stock car. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. JB4 Features and Benefits Power gains of up to 100hp and 140tq to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation Includes the rugged JB4 billet aluminum enclosure for protection CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment 91 octane fuel or better required for performance gains Ethanol (E85) compatible tuning maps Able to read/delete fault codes Not VIN locked and can be removed without a trace and resold down the road Made in the USA Free USA Shipping 5 year warranty Note: For off-road racing use only. Not for sale or use in California.
Show More Show Less
MMX Magnetic Gear Shifter Paddles - Titanium Silver - BMW F & G Chass...
For models with an M Performance steering wheel only
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
MMX Performance - Corporate Logo
T#:34415638
Part#: MMR04-0002-TITAN
Ships in 2 Business Days
$ 420.99 USD
Free Shipping
$ 420.99 USD
Free Shipping

Welcome to the ultimate pair of billet magnetic shift paddles for BMW F & G-Series vehicles. Put yourself back in control of your BMW and boost your interior aesthetics with these exquisitely engineered billet magnetic aluminum paddles. Unlike some options, these are fully engineered replacements, not just stick-on covers.

It’s easy to see why the OEM paddle shift can feel weak and spongy—almost underwhelming. That’s where MMX's magnetic system truly stands out. With advanced magnetic shift technology, you’ll experience crisp, responsive gear transitions. Each shift delivers a satisfying click with instant engagement, making every drive more enjoyable and precise.

Manufactured from Aircraft grade T6-6061 aluminum billet, MMX's gear shift paddle set puts you back in control of your BMW to make grabbing the next gear more intuitive and certainly more pleasurable. This added feel and ease of use makes MMX's paddles the natural choice over the slightly disappointing OEM Paddles.

MMX developed these paddle blades with the track in mind, making it easy for you to select gears no matter the steering angle. Because, unlike some stick-on alternatives, they have engineered these to be complete replacement blades, along with new control units.

These shifter blades are available in three anodized finishes to complement the interior of your BMW: Red, Black, or Titanium Silver

Features:

Magnetic shift technology

Kit complete with everything you need

Precise fitment for F & G-Series BMWs

Manufactured from Aircraft grade T6-6061 aluminium billet

Complete replacement blades

Kit supplied with new control units

Designed, engineered and manufactured in the UK

Total rigidity for each gear change and avoiding the horrible bendy/wobbly feel that less rigid paddles offer

The choice of three anodized colors: red, black, or titanium silver

Show More Show Less
MMX Magnetic Gear Shifter Paddles - Red - BMW F & G Chassis w/ M Perf...
For models with an M Performance steering wheel only
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
MMX Performance - Corporate Logo
T#:34415639
Part#: MMR04-0003-RED
Ships in 3 Business Days
$ 420.99 USD
Free Shipping
$ 420.99 USD
Free Shipping

Welcome to the ultimate pair of billet magnetic shift paddles for BMW F & G-Series vehicles. Put yourself back in control of your BMW and boost your interior aesthetics with these exquisitely engineered billet magnetic aluminum paddles. Unlike some options, these are fully engineered replacements, not just stick-on covers.

It’s easy to see why the OEM paddle shift can feel weak and spongy—almost underwhelming. That’s where MMX's magnetic system truly stands out. With advanced magnetic shift technology, you’ll experience crisp, responsive gear transitions. Each shift delivers a satisfying click with instant engagement, making every drive more enjoyable and precise.

Manufactured from Aircraft grade T6-6061 aluminum billet, MMX's gear shift paddle set puts you back in control of your BMW to make grabbing the next gear more intuitive and certainly more pleasurable. This added feel and ease of use makes MMX's paddles the natural choice over the slightly disappointing OEM Paddles.

MMX developed these paddle blades with the track in mind, making it easy for you to select gears no matter the steering angle. Because, unlike some stick-on alternatives, they have engineered these to be complete replacement blades, along with new control units.

These shifter blades are available in three anodized finishes to complement the interior of your BMW: Red, Black, or Titanium Silver

Features:

Magnetic shift technology

Kit complete with everything you need

Precise fitment for F & G-Series BMWs

Manufactured from Aircraft grade T6-6061 aluminium billet

Complete replacement blades

Kit supplied with new control units

Designed, engineered and manufactured in the UK

Total rigidity for each gear change and avoiding the horrible bendy/wobbly feel that less rigid paddles offer

The choice of three anodized colors: red, black, or titanium silver

Show More Show Less


MMX Billet Air Conditioning Caps - Pair Grey R134A
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
MMX Performance - Corporate Logo
T#:48608191
Part#: MMR03-0004
Ships in 6 Business Days
New Item
$ 40.00 USD
Free Shipping
$ 40.00 USD
Free Shipping
MMX Magnetic Gear Shifter Paddles - Black - BMW F & G Chassis w/ M Pe...
For models with an M Performance steering wheel only
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
MMX Performance - Corporate Logo
T#:34415637
Part#: MMR04-0001-BLK
Ships in 4 Business Days
$ 420.99 USD
Free Shipping
$ 420.99 USD
Free Shipping

Welcome to the ultimate pair of billet magnetic shift paddles for BMW F & G-Series vehicles. Put yourself back in control of your BMW and boost your interior aesthetics with these exquisitely engineered billet magnetic aluminum paddles. Unlike some options, these are fully engineered replacements, not just stick-on covers.

It’s easy to see why the OEM paddle shift can feel weak and spongy—almost underwhelming. That’s where MMX's magnetic system truly stands out. With advanced magnetic shift technology, you’ll experience crisp, responsive gear transitions. Each shift delivers a satisfying click with instant engagement, making every drive more enjoyable and precise.

Manufactured from Aircraft grade T6-6061 aluminum billet, MMX's gear shift paddle set puts you back in control of your BMW to make grabbing the next gear more intuitive and certainly more pleasurable. This added feel and ease of use makes MMX's paddles the natural choice over the slightly disappointing OEM Paddles.

MMX developed these paddle blades with the track in mind, making it easy for you to select gears no matter the steering angle. Because, unlike some stick-on alternatives, they have engineered these to be complete replacement blades, along with new control units.

These shifter blades are available in three anodized finishes to complement the interior of your BMW: Red, Black, or Titanium Silver

Features:

Magnetic shift technology

Kit complete with everything you need

Precise fitment for F & G-Series BMWs

Manufactured from Aircraft grade T6-6061 aluminium billet

Complete replacement blades

Kit supplied with new control units

Designed, engineered and manufactured in the UK

Total rigidity for each gear change and avoiding the horrible bendy/wobbly feel that less rigid paddles offer

The choice of three anodized colors: red, black, or titanium silver

Show More Show Less