BMW Engine Parts for BMW X Series F16 (2015+)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

OEM INA Accessory Belt Tensioner Assembly - N55 S55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:394063
Part#: 11288604266
In Stock
$ 79.99

This product was last offered at the strikethrough price on
06-08-2026

$ 60.99 USD
Free Shipping on orders $49 and up
$ 60.99 USD
Free Shipping on orders $49 and up

Pulleys begin to squeak once they are reaching the end of their life span and the tensioners can fail, no longer applying enough tension to the accessory belt. If not replaced, tese can seize up and lead to a long host of problems that would leave you stranded on the side of the road. Prevent this with routine maintenance and replace your belts and pulleys every 50,000 miles to ensure continued reliability.

Fits the following BMW chassis:
F22/23 F87 F3X F07/10/11 F06/12/13 F01/02 F25/26 E70/71 F15/16

Fits the following BMW engines:
N55 3.0L, S65 3.0L

Show More Show Less
OEM INA Deflection Pulley - N55 3.0L, S55 3.0L
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:554453
Part#: 11288673720
In Stock
$ 45.99 USD
Free Shipping on orders $49 and up
Pulleys begin to squeak once they are reaching the end of their life span and if not replaced, can seize up and lead to a long host of problems that would leave you stranded on the side of the road.
OEM INA Idler Pulley -- N55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:402395
Part#: 11287615130
In Stock
$ 35.34

This product was last offered at the strikethrough price on
05-06-2026

$ 24.99 USD
Free Shipping on orders $49 and up
$ 24.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

 OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E70,E71,F06,F07,F10,F12,F13,F15,F16,F01,F02,

Fits BMW Engines including:
N55

Show More Show Less

Fuel Pump Cam Follower - BMW/MINI B46 B48 B58
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:39768327
Part#: 06H109311B
In Stock
$ 29.99

This product was last offered at the strikethrough price on
06-25-2026

$ 28.95 USD
Free Shipping on orders $49 and up
$ 28.95 USD
Free Shipping on orders $49 and up

Precision Raceworks - Corporate Logo
T#:38195401
Part#: 201-0008
Ships in 5 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
The **BMW N55 Replacement Coil Power Harness** by Precision Raceworks is a premium, direct-fit replacement for the factory harness, designed to enhance reliability and ensure consistent power delivery to the ignition coils. Constructed with high-quality automotive-grade materials, it optimizes electrical conductivity while minimizing the risk of misfires and performance issues. ### **Key Features:** - **OEM-Compatible Design:** Plug-and-play installation for a seamless fit. - **Superior Durability:** Built with high-temperature and abrasion-resistant materials for long-lasting performance. - **Optimized Electrical Flow:** Delivers stable and reliable power to the ignition coils. - **Compatible with All N55 Engines:** Works flawlessly with both stock and upgraded ignition systems. Perfect for both daily driving and high-performance builds, the Precision Raceworks N55 Coil Power Harness ensures smooth and efficient engine operation.
Show More Show Less

Walker - Corporate Logo
T#:31324163
Part#: 11787645875
In Stock at Vendor
$ 101.99

This product was last offered at the strikethrough price on
04-14-2026

$ 91.99 USD
Free Shipping on orders $49 and up
$ 91.99 USD
Free Shipping on orders $49 and up
The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.
Show More Show Less
Ina - Corporate Logo
T#:42301983
Part#: ZC0219
In Stock
$ 80.99

This product was last offered at the strikethrough price on
06-29-2026

$ 62.99 USD
Free Shipping on orders $49 and up
$ 62.99 USD
Free Shipping on orders $49 and up
Ensure your BMW runs like new with the precision and durability of this OEM INA timing chain - engineered for performance, built for reliability.

OEM Ina Intake Hydraulic Tappet - BMW N52 N54 N55 N20 S55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:591661
Part#: 11337548690
In Stock
$ 15.99 USD
Free Shipping on orders $49 and up
Hydraulic valve lifter

Precision Raceworks - Corporate Logo
T#:38195425
Part#: 601-0150-1
Ships in 10 Business Days
$ 479.99 USD
$ 479.99 USD
Rid your BMW's N55 of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit! Precision Raceworks' ignition kit is designed to fit any vehicle with an N55 engine and offers the highest output of any kit on the market! Featuring 100% Plug-&-Play connections, low resistance 50ohm/ft proprietary plug wires, and design technology from Marine and Aerospace applications, these coils are guaranteed to output consistent high voltage and current for optimal ignition system performance and reliability. Every component in this kit meets or exceeds OEM quality and features premium seals for dust and water resistance. While coils do not directly increase horsepower, stock BMW coils can wear out quickly, resulting in underperforming voltage and current output. This often leads to weaker spark intensity and reduced power outpaut. Due to the increased voltage and current output, many customers have seen as much as 20+ whp/wtq gained by switching to Precision Raceworks coils over all other coils on the market! By upgrading to Precision's Performance Ignition Kit, spark quality can be restored, and lost power regained often with the additional power beyond what other coils provide. No software tune is required for installation or operation, but if desired, coil output can be increased to 118mJ from most software tuning companies! Features: Fits any N55 BMW engine w/ the stock intake manifold 100% Plug & Play! Highest Voltage and Current Output Available Low Resistance 50ohm/ft proprietary plug wires Eliminates Ignition Related Misfires Improves Throttle Response Restores Smooth Idle Specifications: Weight: 9lbs Full DME control of ignition coils: Yes Retains factory cooled controlled system: Yes 100% Plug and Play wiring: Yes Connection style: OEM Weatherproof Quick Connect Coil output: Up to 118mJ FITMENT NOTES: OEM Manifold Kits mount to the DI fuel rail. May require removal of the factory airbox and removal of the post on the manifold (Cars that have airbox on top of the intake manifold). Aftermarket intake highly recommended and may be required on some applications. Not compatible with OEM airbox (or any airbox that sits on the manifold in the same location as the coils) and may require removal of a mounting peg on the manifold. F10 and e9x N55 Chassis cannot fit both ignition kit and aftermarket manifold due to inlet location across the back of the engine.
Show More Show Less
Deflection Pulley
For vehicles with a production date up to 03/2016
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:593550
Part#: 11288604267
Special Order: No Guaranteed ETA
$ 49.48 USD
$ 49.48 USD