BMW 2 Series F23 (2015+)

MMR Baffled Sump Plate - N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Does not fit xDrive Vehicles

T#:4565839

Part#: MMR20-0501

In Stock

$ 560.99 USD

Add to Wish List

Qty

$ 560.99 USD

Add to Wish List

MMR's Performance sump baffle has been designed from the ground-up to provide effective oil control which both reduces surge and maintains a more constant oil pressure. The N55 engine is prone to oil starvation issues when driven hard on the road and especially when used on track. The T-6061 anodized MMR sump baffle features a total of 7 one-way oil control flaps and specific baffling that MMR has been tested over thousands of miles of track and road use. Unlike other solutions available that require a plate to be welded in, the MMR sump baffle is bolted into place making the addition of the baffle considerably easier and more accessible to install.

Show More Show Less

MMR Low Temp Thermostat - N54/N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For 2008 and up models

T#:4565826

Part#: MMR17-0101

Ships in 1 Business Day

$ 70.99 USD

Add to Wish List

Qty

$ 70.99 USD

Add to Wish List

MMR's Low Temp Oil Thermostat is one of the easiest ways to increase your oil cooling capability. Rated to maintain the oil temps at about 194F (90c) to 230F (110c). Machined from aircraft grade T-6061 aluminum and anodized in MMR's trademark finish for durability. Installation is easy as it fits right into the OEM oil thermostat housing on the N54 and N55. Highly recommended for cars used on the track or with a higher power and torque output than stock.

Show More Show Less

Active Autowerke GESI Catted Race Downpipe - BMW F3X F22/23 B58 3.0L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
This Fits 2024 and Earlier Models Only!

T#:638600

Part#: 11-062

In Stock

5% off MSRP $ 1,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,424.99 USD

Add to Wish List

Qty

5% off MSRP

$ 1,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,424.99 USD

Add to Wish List

For over 30 years, Active Autowerke has been the one to turn to for high quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. The F Chassis B58 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance. Features Include NO CEL when using this downpipe GESI EPA registered high flow and fully OBD2 compliant Casted upper stainless steel V-Band for precise fitment 4.50" diameter piping allows for maximum power output Quicker turbo spool Rated for 500 to 850 hp applications Withstands up to 1500° F Can reach operational efficiency within 9 seconds of startup Easily bolts-on – no cutting or welding required Durable construction from TIG welded 304 stainless steel Precise fitment Ultra high flow 400 cell per square inch catalyst EPA certified for use on OBD2 vehicles (1996 and newer) except in California 304 stainless steel substrate is furnace braised to the mantle for outstanding durability GESi® proprietary precious metal loading technology ensures greatly reduced emissions Ideal for Forced Induction Applications with no loss of HP Both passengers and drivers are safe from harmful emissions and noise Covered by 5-Year / 50,000 Mile Warranty (on shell and tube ends) and 2 year / 25,000 Mile Warranty on the Catalytic core to original purchaser only - NOTE: warranty will be null and void if your car has excessive burble (greater than stock) as that physically destroys the catalytic core Made in Miami, Florida

Show More Show Less

Active Autowerke Catted Downpipe - F3X F22/23 F87 N55 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:599319

Part#: 11-040-C

In Stock

$ 1,424.99 USD

Add to Wish List

Qty

$ 1,424.99 USD

Add to Wish List

BMW introduced a new valvetronic, single turbo version of its direct-injection engine for the F-Chassis models beginning in 2012. The Active Autowerke N55 downpipe for the M235i, 335i, 435i and M2 helps unleash some of the potential that is restricted by the OEM downpipe. Turbochargers are powered by spent exhaust gases created during the combustion process. The quicker these gases are evacuated, the better. Unfortunately, the factory down pipe in the N55 is quite restrictive, which results in slower exhaust gases and slower turbo spool. The Active Autowerke F-Chassis N55 Signature down pipe utilizes 3.5” diameter stainless steel piping in order to provide more power, quicker spool, and extreme durability. This variant includes a 4.5" high flow GESI catalytic converter that will NOT produce a CEL! The GESi® G-Sport Ultra High Output Catalytic Converter features full 304 stainless steel construction, including the substrate. GESi® UHO-Series Catalytic Converters are EPA certified in 49 states and fully OBD2 compliant. GESi® proprietary precious metal loading technology ensures greatly reduced emissions, eliminating most "Check Engine Lights". These high flow catalytic converters outperform stock converters and provide a reliable solution to the most common catalytic converter problems. The GESi® UHO-Series Catalytic Converters are rated for engines putting out between 500 and 850 horsepower while maintaining a high flow capacity. The reduced back-pressure from this high flow catalytic converter will allow you to maximize your engines horsepower without the harmful emissions. Say goodbye to Check Engine Lights and failed emissions tests! Please Note: These catalytic converters are not legal for use on vehicles registered in the state of California as a result of California Vehicle Code Section 27156 and 38391.

Show More Show Less

MMX Oil Filler Cap - Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Most BMW Models 2007 Onwards or Mini Models

T#:4552062

Part#: MMR03-0102-BL

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

MMX's Performance billet oil filler cap machined from billet T-6061 aluminum has been designed to instantly give your engine bay an subtle aesthetic upgrade. This cap comes in a Black finish. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur. Reusing of original seal is required.

Show More Show Less

Active Autowerke Aflow Catted Race Downpipe - BMW F3X F22/23 B58 3.0L...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:40004859

Part#: 11-062A

In Stock

5% off MSRP $ 1,199.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,139.99 USD

Add to Wish List

Qty

5% off MSRP

$ 1,199.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,139.99 USD

Add to Wish List

For over 30 years, Active Autowerke has been the one to turn to for high quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. The F Chassis B58 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance. Features Include: NO CEL for catalytic efficiency when using this downpipe Active EPA registered high flow and fully OBD2 compliant Casted upper stainless steel V-Band for precise fitment 4.50" diameter piping allows for maximum power output Quicker turbo spool Rated for up to 800 hp applications Withstands up to 1500 F Can reach operational efficiency within 9 seconds of startup Easily bolts-on no cutting or welding required Durable construction from TIG welded 304 stainless steel Precise fitment Ultra high flow 400 cell per square inch catalyst EPA compliant for use on OBD2 vehicles (1996 and newer) except in California 304 stainless steel substrate is furnace braised to the mantle for outstanding durability Active proprietary precious metal loading technology ensures greatly reduced emissions Ideal for Forced Induction Applications with no loss of HP Both passengers and drivers are safe from harmful emissions and noise Covered by 5-Year / 50,000 Mile Warranty (on shell and tube ends) and 2-Year / 25,000 Mile Warranty on the Catalytic core to original purchaser only - NOTE: warranty will be null and void if your car has excessive burble (greater than stock) as that physically destroys the catalytic core Made in Miami, Florida

Show More Show Less

MMX Oil Catch Can Kit - N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4565831

Part#: MMR17-0501FK

Ships in 6 Business Days

$ 476.99 USD

Add to Wish List

Qty

$ 476.99 USD

Add to Wish List

Higher mileage engines and especially ones with direct-injection are prone to carbon build-up on the backs of the inlet valves. However, when deposits are removed by the catch can's filter and separation process, the intake air receives less oil and more oxygen, resulting in a cleaner, more reliable, and better performing engine. MMR's Performance catch can kit For N55 powered M235i's and M2's was designed to help owners ensure their engines are running at optimum performance This is done by removing unwanted oil from the PCV system before it can get back into the intake. The T-6061 billet filter housing, anodized in the trademark MMR finish, comes with a billet bracket for easy installation, including all hoses and fittings necessary for installation. The catch can kit has been designed to offer added performance, allow easy installation and enhanced aesthetics too. Checking the level for any oil removed from the intake system is easy thanks to the integral dipstick. A cap-head bolt mounted in the lower section of the catch can allows for easy draining, or if you prefer, the lower section itself can be easily unscrewed and removed. Features: Effectively prevents oil build-up in the intake system and intercooler walls Maintains optimum engine performance Easy installation with all supplied hardware included Race fittings and PTFE-lined hoses throughout Easy oil level checking and draining

Show More Show Less

MMX Performance 4-Pin One-Piece Crank Hub Upgrade Kit - With MMR Capt...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:45039725

Part#: MMR20-1004FK

Ships in 2 Business Days

$ 1,227.99 USD

Add to Wish List

Qty

$ 1,227.99 USD

Add to Wish List

The centerpiece of this MMX kit is the UK-made CNC-machined one-piece crank hub, created from billet EN36 steel that's heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. Included are four aerospace precision-machined dowels that mechanically lock the hub to the end of the crank itself, plus a brand new OE bolt. Installation of these dowels is certainly not a DIY job. But, to make the job easier for the professionals, ensuring that the required crank modifications are made safely and accurately, the MMX kit also includes a full installation jig that includes a bolt-on drilling guide, a location bolt for this guide, plus an HSS rolled high-speed drill bit. Together, the single-piece design combined with the four-pin location ensures that there is simply no way that the friction plates can ever slip. With the new OE crank bolt tightened appropriately, this delivers a transformational improvement in reliability and peace of mind versus the OE version. Also included is the MMR Crank Bolt Capture Plate. This adds one additional layer of defense, preventing the crank bolt from being able to back out and loosen over time, ensuring everything is tightly held together as intended.

Show More Show Less

MMR Crank Hub Kit - N55/S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4565824

Part#: MMR20-1003FK

Ships in 2 Business Days

$ 849.99 USD

Add to Wish List

Qty

$ 849.99 USD

Add to Wish List

Anyone with a modified N55/S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the N55/S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a EN36 machined billet one-piece crank hub heat treated with a 0.75mm case hardening which makes it extremely durable. Due to the one-piece design, it ensures that the friction plates cannot slip. This offers a huge jump in reliability when paired with a new properly torques crank bolt. Installation is requires no drilling or modification to the OEM crankshaft ensuring a perfect fit! Included in this kit is MMR's T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. *Installation recommended by a professional shop or technician.

Show More Show Less

MMX Oil Filter Housing - Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4552065

Part#: MMR03-0101-BL

In Stock

$ 142.99 USD

Add to Wish List

Qty

$ 142.99 USD

Add to Wish List

If you are looking for peace of mind over the prone to cracking OEM plastic housing cap, this oil filter housing cap by MMX may be exactly what you are looking for. Composed of billet aluminum, this cap is light, durable, and dresses up your engine bay! Comes finished with a polished anodized dark anthracite coating. Installation is simple as it can be replaced while completing an oil change. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.

Show More Show Less

Active Autowerke Downpipe With G-Sport Cat - N20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5886981

Part#: 11-079

Ships in 3 Business Days

$ 1,424.99 USD

Add to Wish List

Qty

$ 1,424.99 USD

Add to Wish List

The Active Autowerke F-Chassis N20 Signature down pipe utilizes 3.5 diameter stainless steel piping in order to provide more power, quicker spool, and extreme durability. The GESi UHO-Series Catalytic Converters are rated for engines putting out between 500 and 850 horsepower while maintaining a high flow capacity. The reduced back-pressure from this high flow catalytic converter will allow you to maximize your engines horsepower without the harmful emissions. Say goodbye to Check Engine Lights and failed emissions tests! Features: NO CEL when using this downpipe Designed to be as unrestrictive as possible GESI EPA registered high flow and fully OBD2 compliant High flow 4" GESI cat with 3.50" piping allows for maximum power output Quicker turbo spool - improved power over stock Rated for 350 to 500 hp applications Withstands up to 1500 F Can reach operational efficiency within 9 seconds of startup Easily bolts-on no cutting or welding required Durable construction from TIG welded 304 stainless steel Precise fitment Modular design for later upgrades Made in Miami, Florida Ultra high flow 400 cell per square inch catalyst EPA compliant for use on OBD2 vehicles (1996 and newer) except in California Full 304 stainless steel construction 304 stainless steel substrate in the catalytic converter is furnace braised to the mantle for outstanding durability GESi proprietary precious metal loading technology ensures greatly reduced emissions Covered by 5 Year / 50,000 Mile Warranty (on catalytic converter) Ideal for Forced Induction Applications with no loss of HP Both passengers and drivers are safe from harmful emissions and noise ACTIVE AUTOWERKE N20 SIGNATURE DOWNPIPE BENEFITS The speed of a turbo's impeller wheel is limited by exhaust back pressure. A larger down pipe relieves some of this pressure, resulting in quicker and more efficient spool. With Active Autowerke's Signature downpipe, your N20 can rev quicker, and deliver more horsepower and torque. Minimizing back pressure while remaining daily drive-ability was the goal of our N20 downpipe. Owners can now upgrade to a product that is affordable, reliable, and easy to install. After months of research and development, our engineers settled on a 3.5 diameter pipe which utilizes the least number of bends possible. However, the Signature N20 down pipe still fits easily into the OEM location, with a painless installation process. Constructed entirely from 304 stainless steel with 1.5MM wall thickness, we are confident that you'll be pleased with how robust and durable this down pipe is. Trouble-free installation and a long lifespan ensure that you'll enjoy many miles of performance with your N20!

Show More Show Less

Active Autowerke - Upgraded Air Charge Pipe - N55 F30, F32, F34, F87 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For RWD models only

T#:397303

Part#: 15-004

Ships in 3 Business Days

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

This kit from Active Autowerke replaces the weak plastic charge pipe with a new aluminum part, secured with a high-quality silicone couple. When you're building a high-powered turbocharged engine, or even just looking for peace of mind on a stock application, durability modifications are just as important - if not more important - than adding power. If your charge pipe fails, it results in a huge vacuum leak that sends your ECU into limp mode, diminishing performance significantly. Don't wait - upgrade your charge pipe today!

This product fits the following BMWs:
2016+ F87 M2
2014+ F22 M235i
2012+ F30 335i
2014+ F32 / F33 / F36 435i

Show More Show Less

Active Autowerke Signature Trunk Emblem

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

Active Autowerke Catted Race Downpipe - BMW F22/23 F3X G20 B46 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:638760

Part#: 11-065

Ships in 10 Business Days

5% off MSRP $ 1,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,424.99 USD

Add to Wish List

Qty

5% off MSRP

$ 1,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,424.99 USD

Add to Wish List

For over 30 years, Active Autowerke has been the one to turn to for high-quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about.

The B46 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance.

Features Include

NO CEL when using this downpipe

GESI EPA registered high flow and fully OBD2 compliant

Casted upper stainless steel V-Band for precise fitment

3 inch diameter piping allows for maximum power output

Quicker turbo spool

Rated for 500 to 850 hp applications

Withstands up to 1500° F

Can reach operational efficiency within 9 seconds of startup

Easily bolts-on – no cutting or welding required

Durable construction from TIG welded 304 stainless steel

Ultra high flow 400 cell per square inch catalyst

EPA certified for use on OBD2 vehicles (1996 and newer) except in California

304 stainless steel substrate in catalytic converter is furnace braised to the mantle for outstanding durability

GESi® proprietary precious metal loading technology ensures greatly reduced emissions

Both passengers and drivers are safe from harmful emissions and noise

Precise fitment

Made in Miami, Florida

Covered by 5 Year / 50,000 Mile Warranty (on shell and tube ends)

FITMENT NOTE: For G-Chassis models (G20, G22), the cutoff build date of 08/2020 is important as cars produced after that date have a downpipe with different bracket locations. Cars with a build date of 08/2020 and earlier have the brackets in a V configuration. Cars with a build date of 09/2020 and later have the brackets in a straight line and require Active Autowerke p/n 11-065G

Show More Show Less

MMR Boost Pipe Upgrade Kit - N55 F-Chassis

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4551976

Part#: MMR02-0502

Ships in 2 Business Days

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

Connects your turbo outlet to your front mounted intercooler - also know as a "Hot Side Charge Pipe" MMR's high-flow boost pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N55-powered F-Chassis BMW. Smoothbore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR boost pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's boost & charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection.

Show More Show Less

S55 / N55 One-Piece Crank Hub Upgrade Kit - 4-Pin

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:19891361

Part#: MMR20-1004

In Stock

$ 1,064.99 USD

Add to Wish List

Qty

$ 1,064.99 USD

Add to Wish List

Both the N55 and S55 engines are plagued by the same issue when chasing high horsepower numbers... the dreaded crankhub failure. Fortunately MMR Performance has released an upgraded version of their already stout single-piece crankhub, but this time offering a 4-pin dowelled location that locks onto the front of the crankshaft. This configuration eliminates the multi-piece crankhub with friction discs in favor of a more robust single piece crankhub. Recommended for high-powered cars over 700 Horsepower

Show More Show Less

MMX Performance Panel Air Filter Blue - B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4524463

Part#: MMR01-0502

Ships in 2 Business Days

$ 102.99 USD

Add to Wish List

Qty

$ 102.99 USD

Add to Wish List

Replacement performance panel air filter for your B58 engine. Upgrade your engines breathing capabilities with a simple to install air filter! MMX's performance air filter is constructed of cotton gauze and easily drops into the OE airbox. The result is excellent filtration properties, instant performance increase, and extra induction noise. Features Increased engine performance Improved induction noise Fits OE air filter housing Easy installation and completely washable

Show More Show Less

MMX Billet Aluminum Gear Shift Paddle Set - F-Chassis(Dark Anthracite...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Automatic/DCT Vehicles with Gen 1 and 2 Performance Wheels

T#:4510781

Part#: MMR04-0501-DA

Ships in 2 Business Days

$ 283.99 USD

Add to Wish List

Qty

$ 283.99 USD

Add to Wish List

Performance Billet Aluminum Paddle Shifter set for your F-Chassis produced by MMX Performance. Features: Aircraft Grade T-6061 Aluminum Billet Dark Anthracite Grey finish Body molding designed for the M Performance Wheel and Gen 1&2 Performance Wheels Paddles designed to make shifting easy at any steering angle. *Available in Titanium Silver see T#4510783

Show More Show Less

MMX Charge Pipe Kit - B58 F-Chassis

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4538265

Part#: MMR02-0503

Ships in 2 Business Days

$ 451.99 USD

Add to Wish List

Qty

$ 451.99 USD

Add to Wish List

MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your B58-powered F-Chassis BMW. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Two high-flow aluminum charge pipes with CNC leak-free connections Silicone coupler hose o-ring gasket c-clip Jubilee clips x4 Throttle body bolts

Show More Show Less

MMX Billet Aluminum Gear Shift Paddle Set - F-Chassis(Titanium Silver...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Automatic/DCT Vehicles with Gen 1 and 2 Performance Wheels

T#:4510783

Part#: MMR04-0501-TI

Ships in 1 Business Day

$ 283.99 USD

Add to Wish List

Qty

$ 283.99 USD

Add to Wish List

Performance Billet Aluminum Paddle Shifter set for your F-Chassis produced by MMR Performance. Features: Aircraft Grade T-6061 Aluminum Billet Titanium Silver finish Body molding designed for the M Performance Wheel and Gen 1&2 Performance Wheels Paddles designed to make shifting easy at any steering angle. *Available in Dark Anthracite Grey see T#4510781

Show More Show Less

MMX Oil Thermostat Dress-Up Caps - Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5269482

Part#: MMR03-0502BL

Special Order: No Guaranteed ETA

$ 136.99 USD

Add to Wish List

Qty

$ 136.99 USD

Add to Wish List

This dress-up kit offers a high-quality aesthetic update to the OE thermostat cover. Thermostat dress up kit for the BMW N55, N54, and S55 engines manufactured from T6061 billet aluminum. Installation is extremely easy and dresses up the engine bay nicely. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.

Show More Show Less

MMX Oil Pressure Gauge Adaptor - Dark Anthracite

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4552049

Part#: MMR03-0502-KP

Special Order: No Guaranteed ETA

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.

Show More Show Less

MMX High Performance Oil Filter - BMW B58 & B58TU

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29035359

Part#: MMR17-1502

Special Order: No Guaranteed ETA

$ 81.99 USD

Add to Wish List

Qty

$ 81.99 USD

Add to Wish List

Get rid of the notorious B58 oil filter disintegration problem forevermore with the MMR Performance Oil Filter. By replacing the factory paper filter element with MMR’s advanced high-flow, high-filtration stainless steel filter unit, you will protect your engine from the big bills (and potentially worse) caused by the OE filter’s collapse failure. The oil filters on BMW’s B58 & B57 3.0 6-cylinder engines (both petrol and diesel) suffer from a well-documented quality problem with the factory paper-element oil filter. At service time, when removal of the filter is attempted, the bottom section frequently breaks away from the disintegrated filtration material. This leaves the broken base stuck in the oil filter housing and an expensive removal/replacement job to extract the remains and fit a new housing. Such is the problem that there’s even an official BMW technical bulletin to warn their dealers of this. The MMR replacement Oil Filter is a pretty special replacement filter. It fixes this annoying problem once and for all. The MMR Oil Filter element is made from a pleated high-flow stainless steel micronic filter cloth – a medical-grade material guaranteed to filter out oil contamination right down to 20 Microns, ensuring far better protection than paper-based filters can achieve. As well as this exceptional filtration, the filter material allows for five times the flow of comparable paper oil filters. Its design provides consistent filtering across entire filter surface. The failure of the factory oil filter generally just leads to a large bill to extract the damaged remnants. However, more worryingly, it has occasionally been known to lead to broken pieces of filter media running through the small oilways and orifices of the engine’s lubrication system, risking blocking the oil running round the bearings and VANOS system and causing much greater mechanical damage before it is caught. The MMR Oil Filter is a reusable unit which can be used over and over again. As long as it is thoroughly cleaned at each oil change, it will last the lifetime of the vehicle and keep on protecting the engine just as it did when new. However, proper cleaning is not necessarily a DIY job, as it requires the use of a suitable solvent to break down the old oil, and cleaning from the inside out with compressed air to remove any risk of debris remaining. If you have any doubts about this, we recommend as best-practice to change filter with every oil-change. The MMR Oil Filter is a lifetime reusable filter. But to resuse and avoid any future loss of filtration or oil flow, it is essential that it is thoroughly cleaned at each oil change as follows: Remove MMR Oil Filter from filter housing Remove 3x O-Rings from MMR Oil Filter prior to Step 3, as fuel will degrade and cause damage to these rubber/Viton components. Soak the filter one of the following fluids for 5-10 minutes – Petrol/Gasoline or Carb Cleaner or Soap and Water Agitate/stir every few minutes until the outer surface is free of any engine debris Dry the filter using compressed air, blow air through the filter, (do not press the compressed air gun against the filter, keep at least a 10mm gap from nozzle to filter) starting from the inside out, then at an angle on the outside of the screen to further remove any remaining particles or cleaning solution. Once dry, reinstall O-Rings (MMR advices replacement of these O-Rings every oil service - See ES4810064) and refit into oil filter housing and engine. If you have any doubt about your ability to perform this sequence, we recommend replacing the filter element with each oil change.

Show More Show Less

MMX Performance Panel Air Filter Blue - N20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4524482

Part#: MMR01-0702

Ships in 2 Business Days

$ 102.99 USD

Add to Wish List

Qty

$ 102.99 USD

Add to Wish List

Replacement performance panel air filter for your N20 engine. Upgrade your engines breathing capabilities with a simple to install air filter! MMX's performance air filter is constructed of cotton gauze and easily drops into the OE airbox. The result is excellent filtration properties, instant performance increase, and extra induction noise. Features Increased engine performance Improved induction noise Fits OE air filter housing Easy installation and completely washable

Show More Show Less

MMX Magnetic Gear Shifter Paddles - Titanium Silver - BMW F & G Chass...

For models with an M Performance steering wheel only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:34415638

Part#: MMR04-0002-TITAN

Ships in 1 Business Day

$ 420.99 USD

Add to Wish List

Qty

$ 420.99 USD

Add to Wish List

Welcome to the ultimate pair of billet magnetic shift paddles for BMW F & G-Series vehicles. Put yourself back in control of your BMW and boost your interior aesthetics with these exquisitely engineered billet magnetic aluminum paddles. Unlike some options, these are fully engineered replacements, not just stick-on covers.

It’s easy to see why the OEM paddle shift can feel weak and spongy—almost underwhelming. That’s where MMX's magnetic system truly stands out. With advanced magnetic shift technology, you’ll experience crisp, responsive gear transitions. Each shift delivers a satisfying click with instant engagement, making every drive more enjoyable and precise.

Manufactured from Aircraft grade T6-6061 aluminum billet, MMX's gear shift paddle set puts you back in control of your BMW to make grabbing the next gear more intuitive and certainly more pleasurable. This added feel and ease of use makes MMX's paddles the natural choice over the slightly disappointing OEM Paddles.

MMX developed these paddle blades with the track in mind, making it easy for you to select gears no matter the steering angle. Because, unlike some stick-on alternatives, they have engineered these to be complete replacement blades, along with new control units.

These shifter blades are available in three anodized finishes to complement the interior of your BMW: Red, Black, or Titanium Silver

Features:

Magnetic shift technology

Kit complete with everything you need

Precise fitment for F & G-Series BMWs

Manufactured from Aircraft grade T6-6061 aluminium billet

Complete replacement blades

Kit supplied with new control units

Designed, engineered and manufactured in the UK

Total rigidity for each gear change and avoiding the horrible bendy/wobbly feel that less rigid paddles offer

The choice of three anodized colors: red, black, or titanium silver

Show More Show Less

MMX Performance Panel Air Filter Blue - N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4524494

Part#: MMR01-0102

Ships in 4 Business Days

$ 102.99 USD

Add to Wish List

Qty

$ 102.99 USD

Add to Wish List

Replacement performance panel air filter for your N55 engine. Upgrade your engines breathing capabilities with a simple to install air filter! MMX's performance air filter is constructed of cotton gauze and easily drops into the OE airbox. The result is excellent filtration properties, instant performance increase, and extra induction noise. Features Increased engine performance Improved induction noise Fits OE air filter housing Easy installation and completely washable

Show More Show Less

MMX Magnetic Gear Shifter Paddles - Red - BMW F & G Chassis w/ M Perf...

For models with an M Performance steering wheel only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:34415639

Part#: MMR04-0003-RED

Ships in 2 Business Days

$ 420.99 USD

Add to Wish List

Qty

$ 420.99 USD

Add to Wish List

Welcome to the ultimate pair of billet magnetic shift paddles for BMW F & G-Series vehicles. Put yourself back in control of your BMW and boost your interior aesthetics with these exquisitely engineered billet magnetic aluminum paddles. Unlike some options, these are fully engineered replacements, not just stick-on covers.

It’s easy to see why the OEM paddle shift can feel weak and spongy—almost underwhelming. That’s where MMX's magnetic system truly stands out. With advanced magnetic shift technology, you’ll experience crisp, responsive gear transitions. Each shift delivers a satisfying click with instant engagement, making every drive more enjoyable and precise.

Manufactured from Aircraft grade T6-6061 aluminum billet, MMX's gear shift paddle set puts you back in control of your BMW to make grabbing the next gear more intuitive and certainly more pleasurable. This added feel and ease of use makes MMX's paddles the natural choice over the slightly disappointing OEM Paddles.

MMX developed these paddle blades with the track in mind, making it easy for you to select gears no matter the steering angle. Because, unlike some stick-on alternatives, they have engineered these to be complete replacement blades, along with new control units.

These shifter blades are available in three anodized finishes to complement the interior of your BMW: Red, Black, or Titanium Silver

Features:

Magnetic shift technology

Kit complete with everything you need

Precise fitment for F & G-Series BMWs

Manufactured from Aircraft grade T6-6061 aluminium billet

Complete replacement blades

Kit supplied with new control units

Designed, engineered and manufactured in the UK

Total rigidity for each gear change and avoiding the horrible bendy/wobbly feel that less rigid paddles offer

The choice of three anodized colors: red, black, or titanium silver

Show More Show Less

MMX Performance Air Filter Kit with Heat Shield - B58 M240i

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4538199

Part#: MMR11-0502FK

Ships in 2 Business Days

$ 936.99 USD

Add to Wish List

Qty

$ 936.99 USD

Add to Wish List

MMX's Performance intake kit for the M240i introduces a dual-entry high-flow air filter and aluminum bell-mouth design which is easily mounted with billet fixing mounts. Due to the construction of the mounts, which includes rubber support, this eliminates any unnecessary noise or vibration when driving. Included with this kit is a heat shield which retains the factory cold-air entry feed while also blocking excessive engine bay heat allowing for maximum cool air to your engine. The heat shield also comes with its own set of mounting brackets for extra support. With vibrant blue gauze material and an anodized finish, this intake kit adds a nice bit of flair to your engine bay while also adding a fair amount of performance and induction noise! No cutting or permanent modification required as installation takes only minutes. The end result is an increase in performance and induction sound. Features: Increased engine performance and induction noise Bell-mouth intake pipework and high flow blue cotton gauze MMR laser etched logo Billet aluminum mounting brackets with rubber isolators Crinkle-finish heat-shield Carbon fiber support rods

Show More Show Less

MMX Billet Air Conditioning Caps - Pair Grey R134A

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:48608191

Part#: MMR03-0004

Ships in 5 Business Days

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

Active Autowerke Performance Valved Rear Exhaust - GEN 2 - Brushed Ti...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:18534632

Part#: 11-115T

Ships in 3 Business Days

$ 1,139.99 USD

Add to Wish List

Qty

$ 1,139.99 USD

Add to Wish List

True BMW performance, durability, and attractive weight advantages with innovative features places the Active Autowerke BMW F22 235i exhaust in a class of its own. And now Active Autowerke has developed Gen 2 of this model which has been enhanced to take advantage of the OEM valve system. This system is constructed from 100% Brushed 304-stainless steel and features adjustable brushed, black or carbon Active Autowerke double-walled tips, making it ideal both for 2-door and 4-door models. And now the improved sound becomes more pronounced when the valve is opened by the ECU. Rather than creating a complete exhaust system, Active Autowerke opted for a compact design built in a smaller package to deliver more value. The Active Autowerke F22 235i Gen 2 BMW Rear Exhaust System provides an increase in horsepower, better sound and appearance making it the choice for the avid BMW enthusiast. The system is a straight-through design providing substantial improvements to gas flow over the factory exhaust. Our innovative muffler can design provides maximum volume with the exhaust valve open for a true sport sound. This exhaust delivers a wide-open sound, a solid 15+hp boost, and key gains in the midrange with the valve open while the sound comes out non-intrusive with a rich mellow tone with the valve closed. Just like replacing the BMW factory rear exhaust, the Active Autowerke BMW Performance rear exhaust does it in much the same way, if not better by using a much beefier, heavy-duty TORCA-style exhaust clamp. TORCA clamps are known for their strength and sealing capabilities to make that tight seal. Other features like height-adjustable mounting tabs make this exhaust easy to install. Key Features: Large mandrel bent piping for maximum flow Uses factory valve system for maximum exhaust sound Durable, Brushed 100% 304 stainless steel for durability Double-walled signature brushed, black or carbon stainless tips Adjustable Tips with Embossed Active Autowerke Logo Improved power & torque throughout entire RPM band Gains of 12-15 HP over stock configuration Tight seal with use of TORCA style exhaust clamps Height adjustable mounting brackets make installation easy Factory curb weight 27.0 Lbs, Active 335i weighs 22.0 Lbs Fitment for Coupe & Convertible Complete illustrated instruction manual Two year warranty Installation Instructions: http://images.activeautowerke.com/Installation%20PDF's/F2X_M235_Rear_Exhaust_Installtion.pdf

Show More Show Less

MMX Magnetic Gear Shifter Paddles - Black - BMW F & G Chassis w/ M Pe...

For models with an M Performance steering wheel only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:34415637

Part#: MMR04-0001-BLK

Ships in 3 Business Days

$ 420.99 USD

Add to Wish List

Qty

$ 420.99 USD

Add to Wish List

Welcome to the ultimate pair of billet magnetic shift paddles for BMW F & G-Series vehicles. Put yourself back in control of your BMW and boost your interior aesthetics with these exquisitely engineered billet magnetic aluminum paddles. Unlike some options, these are fully engineered replacements, not just stick-on covers.

It’s easy to see why the OEM paddle shift can feel weak and spongy—almost underwhelming. That’s where MMX's magnetic system truly stands out. With advanced magnetic shift technology, you’ll experience crisp, responsive gear transitions. Each shift delivers a satisfying click with instant engagement, making every drive more enjoyable and precise.

Manufactured from Aircraft grade T6-6061 aluminum billet, MMX's gear shift paddle set puts you back in control of your BMW to make grabbing the next gear more intuitive and certainly more pleasurable. This added feel and ease of use makes MMX's paddles the natural choice over the slightly disappointing OEM Paddles.

MMX developed these paddle blades with the track in mind, making it easy for you to select gears no matter the steering angle. Because, unlike some stick-on alternatives, they have engineered these to be complete replacement blades, along with new control units.

These shifter blades are available in three anodized finishes to complement the interior of your BMW: Red, Black, or Titanium Silver

Features:

Magnetic shift technology

Kit complete with everything you need

Precise fitment for F & G-Series BMWs

Manufactured from Aircraft grade T6-6061 aluminium billet

Complete replacement blades

Kit supplied with new control units

Designed, engineered and manufactured in the UK

Total rigidity for each gear change and avoiding the horrible bendy/wobbly feel that less rigid paddles offer

The choice of three anodized colors: red, black, or titanium silver

Show More Show Less

Active Autowerke Performance Valved Rear Exhaust - GEN 2 - Carbon Tip...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:18534634

Part#: 11-115TC

Ships in 3 Business Days

$ 1,376.99 USD

Add to Wish List

Qty

$ 1,376.99 USD

Add to Wish List

True BMW performance, durability, and attractive weight advantages with innovative features places the Active Autowerke BMW F22 235i exhaust in a class of its own. And now Active Autowerke has developed Gen 2 of this model which has been enhanced to take advantage of the OEM valve system. This system is constructed from 100% Brushed 304-stainless steel and features adjustable brushed, black or carbon Active Autowerke double-walled tips, making it ideal both for 2-door and 4-door models. And now the improved sound becomes more pronounced when the valve is opened by the ECU. Rather than creating a complete exhaust system, Active Autowerke opted for a compact design built in a smaller package to deliver more value. The Active Autowerke F22 235i Gen 2 BMW Rear Exhaust System provides an increase in horsepower, better sound and appearance making it the choice for the avid BMW enthusiast. The system is a straight-through design providing substantial improvements to gas flow over the factory exhaust. Our innovative muffler can design provides maximum volume with the exhaust valve open for a true sport sound. This exhaust delivers a wide-open sound, a solid 15+hp boost, and key gains in the midrange with the valve open while the sound comes out non-intrusive with a rich mellow tone with the valve closed. Just like replacing the BMW factory rear exhaust, the Active Autowerke BMW Performance rear exhaust does it in much the same way, if not better by using a much beefier, heavy-duty TORCA-style exhaust clamp. TORCA clamps are known for their strength and sealing capabilities to make that tight seal. Other features like height-adjustable mounting tabs make this exhaust easy to install. Key Features: Large mandrel bent piping for maximum flow Uses factory valve system for maximum exhaust sound Durable, Brushed 100% 304 stainless steel for durability Double-walled signature brushed, black or carbon stainless tips Adjustable Tips with Embossed Active Autowerke Logo Improved power & torque throughout entire RPM band Gains of 12-15 HP over stock configuration Tight seal with use of TORCA style exhaust clamps Height adjustable mounting brackets make installation easy Factory curb weight 27.0 Lbs, Active 335i weighs 22.0 Lbs Fitment for Coupe & Convertible Complete illustrated instruction manual Two year warranty Installation Instructions: http://images.activeautowerke.com/Installation%20PDF's/F2X_M235_Rear_Exhaust_Installtion.pdf

Show More Show Less

Active Autowerke Performance Valved Rear Exhaust - GEN 2 - Black Tips...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:18534633

Part#: 11-115TB

Ships in 3 Business Days

$ 1,177.99 USD

Add to Wish List

Qty

$ 1,177.99 USD

Add to Wish List

True BMW performance, durability, and attractive weight advantages with innovative features places the Active Autowerke BMW F22 235i exhaust in a class of its own. And now Active Autowerke has developed Gen 2 of this model which has been enhanced to take advantage of the OEM valve system. This system is constructed from 100% Brushed 304-stainless steel and features adjustable brushed, black or carbon Active Autowerke double-walled tips, making it ideal both for 2-door and 4-door models. And now the improved sound becomes more pronounced when the valve is opened by the ECU. Rather than creating a complete exhaust system, Active Autowerke opted for a compact design built in a smaller package to deliver more value. The Active Autowerke F22 235i Gen 2 BMW Rear Exhaust System provides an increase in horsepower, better sound and appearance making it the choice for the avid BMW enthusiast. The system is a straight-through design providing substantial improvements to gas flow over the factory exhaust. Our innovative muffler can design provides maximum volume with the exhaust valve open for a true sport sound. This exhaust delivers a wide-open sound, a solid 15+hp boost, and key gains in the midrange with the valve open while the sound comes out non-intrusive with a rich mellow tone with the valve closed. Just like replacing the BMW factory rear exhaust, the Active Autowerke BMW Performance rear exhaust does it in much the same way, if not better by using a much beefier, heavy-duty TORCA-style exhaust clamp. TORCA clamps are known for their strength and sealing capabilities to make that tight seal. Other features like height-adjustable mounting tabs make this exhaust easy to install. Key Features: Large mandrel bent piping for maximum flow Uses factory valve system for maximum exhaust sound Durable, Brushed 100% 304 stainless steel for durability Double-walled signature brushed, black or carbon stainless tips Adjustable Tips with Embossed Active Autowerke Logo Improved power & torque throughout entire RPM band Gains of 12-15 HP over stock configuration Tight seal with use of TORCA style exhaust clamps Height adjustable mounting brackets make installation easy Factory curb weight 27.0 Lbs, Active 335i weighs 22.0 Lbs Fitment for Coupe & Convertible Complete illustrated instruction manual Two year warranty Installation Instructions: http://images.activeautowerke.com/Installation%20PDF's/F2X_M235_Rear_Exhaust_Installtion.pdf

Show More Show Less

MMX Charge Pipe Kit - N20 F-Chassis Manual Cars

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Manual Cars Only

T#:4552006

Part#: MMR02-0701M

Special Order: No Guaranteed ETA

$ 489.99 USD

Add to Wish List

Qty

$ 489.99 USD

Add to Wish List

MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N20-powered F-Chassis BMW. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Three high-flow aluminium charge pipes with CNC leak-free connections Four silicone coupler hoses c-clips Jubilee clips

Show More Show Less

MMX Oil Thermostat Dress-Up Caps W/ Gauge Adaptor - Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5269479

Part#: MMR03-0502GBL

Special Order: No Guaranteed ETA

$ 111.99 USD

Add to Wish List

Qty

$ 111.99 USD

Add to Wish List

This dress-up kit offers a high-quality aesthetic update to the OE thermostat cover. Thermostat dress up kit for the BMW N55, N54, and S55 engines manufactured from T6061 billet aluminum. Installation is extremely easy and dresses up the engine bay nicely. Includes billet adaptor which is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results