BMW Intake Parts for BMW 2 Series F23 (2015+)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

BMC - Corporate Logo
T#:398738
Part#: FB928/20
In Stock at Vendor
$ 91.99 USD
Free Shipping
$ 91.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
FTP Motorsport - Corporate Logo
T#:581354
Part#: SG71337
Back Ordered
$ 270.00 USD
Free Shipping
$ 270.00 USD
Free Shipping
This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers
Show More Show Less
BMC - Corporate Logo
T#:398733
Part#: FB740/20
In Stock at Vendor
$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:398727
Part#: FB702/20
In Stock at Vendor
$ 88.00 USD
Free Shipping
$ 88.00 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

FTP Motorsport - Corporate Logo
T#:586882
Part#: SG71439
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume
Show More Show Less
FTP Motorsport - Corporate Logo
T#:578627
Part#: SG71386
Special Order: No Guaranteed ETA
$ 300.00 USD
Free Shipping
$ 300.00 USD
Free Shipping
The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection
Show More Show Less

FTP Motorsport - Corporate Logo
T#:583743
Part#: SG71442
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume
Show More Show Less
FTP Motorsport - Corporate Logo
T#:582219
Part#: SG71337BP
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
This pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory piping is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers
Show More Show Less

FTP Motorsport - Corporate Logo
T#:578631
Part#: SG71413
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes.
Show More Show Less

FTP Motorsport Charge Pipe - F22/23 F3X G01 G11 G30/32 B58
For B58 Gen1 Engines Only - Will Not Fit B58 Gen2 (B58TU) Engines
FTP Motorsport - Corporate Logo
T#:578620
Part#: SG71391
Special Order: No Guaranteed ETA
$ 270.00 USD
Free Shipping
$ 270.00 USD
Free Shipping
The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection
Show More Show Less
FTP Motorsport - Corporate Logo
T#:3047551
Part#: SG71391-R
Special Order: No Guaranteed ETA
$ 270.00 USD
Free Shipping
$ 270.00 USD
Free Shipping
The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection
Show More Show Less