Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.
This is a complete plug and play kit to install a Bluetooth ethanol sensor in about 30 minutes! The kit includes the following: New 5/16" E85 compatible fuel lines for your engine bay Genuine Continental ethanol sensor Fuel-It! Bluetooth analyzer Plug and play harness Includes both Bluetooth App & 5v analog output for JB4 or flash tuning NOTICE: If you have an N26 motor type, you will need to retrofit the HPFP supply line to part number 13537585415 to be compatible with this kit. *For the BMW F-series JB4 platform connect the white wire to position #14 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 14/15/16 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.
Show More Show Less
If you're running E85 or ethanol mixes in your BMW, you need this kit! As many of you know the BMW motors can be very picky about how much ethanol you run to achieve peak performance but not run lean. Consequently, BMS have put together a kit enabling you to easily install an ethanol sensor with no permanent modifications needed. You will simply remove your low pressure fuel line in the engine bay and plug in our kit. It's a complete plug and play solution that utilizes our Bluetooth app to monitor your ethanol content. When you are ready to return to stock, you will simply remove the kit and re-install the stock fuel line. The complete kit includes the following: Genuine Continental ethanol sensor Fuel-It! Bluetooth Universal Analyzer Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Proprietary custom billet fittings for plug and play OEM integration One wiring harness with Posi-tap connector Bluetooth Model Supports stand-alone Bluetooth operation with the Fuel-It! app *For the JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI Ethanol Setup option 0 to enable pin location 2/3/4 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.
Show More Show Less
