BMW Intake Parts for BMW X Series F39 (2018+)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:
Eventuri Filter Cleaning Kit
Eventuri Filter Cleaning Kit
Eventuri - Corporate Logo
T#:396394
Part#: EVE-FLC
Ships in 3 Business Days
$ 30.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 30.00 USD
Free Shipping on orders $49 and up
Add to Wish List
This filter cleaning kit powers away dirt and contaminants leaving your filter in like-new condition.
FTP Motorsport Intake Pipe Rear Section - BMW F39 F48 & Mini F5X F60 B36/B38/B46/B48
FTP Motorsport Intake Pipe Rear Section - BMW F39 F48 & Mini F5X F60 ...
FTP Motorsport - Corporate Logo
T#:586880
Part#: SG71434
Ships in 6 Business Days
$ 220.00

This product was last offered at the strikethrough price on
06-08-2026

$ 169.99 USD
Free Shipping
Add to Wish List
$ 169.99 USD
Free Shipping
Add to Wish List
This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume
Show More Show Less
Eventuri Carbon Fiber Intake Kit - F44 M235i xDrive, F39 X2 M35i B48 2.0L
Eventuri Carbon Fiber Intake Kit - F44 M235i xDrive, F39 X2 M35i B48 ...
Eventuri - Corporate Logo
T#:2242237
Part#: EVE-F4XB48-CF-IN
Ships in 6 Business Days
$ 1,395.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 1,395.00 USD
Free Shipping on orders $49 and up
Add to Wish List

Turner Motorsport introduces the Eventuri Intake System for the F40 M135i and F44 M235i, meticulously designed to redefine the standards in intake performance. Crafted by passionate enthusiasts and seasoned engineers with backgrounds in Aeronautics and automotive tuning, Eventuri focuses on delivering genuine gains rather than mere claims.

  • Patented Venturi Housing System: Enhances airflow with an integrated Mass Air Flow sensor section for optimal performance.
  • Generation 2 Dry Filter: Bespoke filter design maintains laminar airflow conditions for improved efficiency.
  • Maximized Front Duct Volume: Reduces potential restrictions, ensuring steady IATs (Inlet Air Temperatures) for diverse driving conditions.
  • Improved Throttle Response: Allows for better throttle response, optimizing turbo performance with a lower waste-gate duty cycle.

The Eventuri Difference:

  • Carbon Fibre Housings: Patented design with Gen 2 bespoke filters for an aerodynamically efficient airflow path.
  • Venturi Effect: Utilizes a smooth reduction in cross-sectional area to increase airflow velocity, resulting in enhanced power.
  • Inverted Cone Filter: Decoupled from the MAF to eliminate airflow shape constraints and further amplify the venturi effect.

Elevate your F40 M135i or F44 M235i with the Eventuri Intake System, where performance meets precision engineering.

Show More Show Less
AEM V3 Universal Water/Methanol Injection Kit (30-3300)
AEM V3 Universal Water/Methanol Injection Kit (30-3300)
AEM Electronics - Corporate Logo
T#:369781
Part#: 30-3000
In Stock
11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
Add to Wish List
11% off MSRP
$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
Add to Wish List
Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing
Show More Show Less
AEM V3 Water/Methanol Injector Kit (Qty 2)
AEM V3 Water/Methanol Injector Kit (Qty 2)
AEM Electronics - Corporate Logo
T#:20815166
Part#: 30-3313
In Stock
12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
Add to Wish List
12% off MSRP
$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
Add to Wish List
AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.
Show More Show Less
V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max
V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...
AEM Electronics - Corporate Logo
T#:590418
Part#: 30-3304
In Stock at Vendor
11% off MSRP $ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping
Add to Wish List
11% off MSRP
$ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping
Add to Wish List

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

  • Enhances performance and efficiency for BMW and MINI vehicles
  • Maximizes power output while ensuring engine safety
  • Internal MAP sensor for precise control
  • 35PSI maximum pressure capacity for reliability
  • Improves horsepower, torque, and fuel economy
Show More Show Less
AEM Water/Methanol Injection System
AEM Water/Methanol Injection System
AEM Electronics - Corporate Logo
T#:20815164
Part#: 30-3326
In Stock at Vendor
11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD
Free Shipping
Add to Wish List
11% off MSRP
$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD
Free Shipping
Add to Wish List
AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Shipping