BMW F80 M3 S55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

BMS Pedal Tuner - N52, N54, N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:586269
Part#: BMSPBT
In Stock
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA
Show More Show Less
AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than h...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AeroCatch - Corporate Logo
T#:340098
Part#: AEROCATCH
In Stock
$ 566.99

This product was last offered at the strikethrough price on
05-13-2026

Starting at $ 82.99 USD
Free Shipping
Starting at $ 82.99 USD
Free Shipping
As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.
Show More Show Less
JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:598298
Part#: JB4-SPWCK-F
In Stock
$ 159.00 USD
Free Shipping
$ 159.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.
Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For use with older E chassis BMW JB4 systems with the square plastic case.
Burger Motorsports - Corporate Logo
T#:403194
Part#: JB4-BT
In Stock
$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.
Show More Show Less

BMC Performance Air Filter - F06 F10 F12 F80/2 M3 M4 M5 M6
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BMC - Corporate Logo
T#:398705
Part#: FB647/20
In Stock at Vendor
$ 207.99 USD
Free Shipping
$ 207.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
Universal BMW Jack Pad Red - Set Of 4
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:9803960
Part#: BMWJACKPADRED4
Ships in 2 Business Days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

  • Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
  • Prevents damage to rocker panels or vehicle undercarriage
  • Made from solid billet aluminum for durability
  • Engraved Burger Motorsports logo for authenticity
  • Honeycomb grip pattern for stability during use
Show More Show Less

Race Polyurethane Rear Lower Camber Link Bushings, Inner Position Set...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Powerflex Black Series - Corporate Logo
T#:376520
Part#: PFR5-1215BX2
Ships in 1 Business Day
$ 159.99 USD
Free Shipping
$ 159.99 USD
Free Shipping

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
2006 - 2009 E91 325xi 328i 328xi
2009 - 2011 E91 328i 328xi 
2007 - 2013 E92 328i 328xi 335i 335xi
2007 - 2013 E93 328i 335i

Show More Show Less
Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:5788180
Part#: BMS-F-S55HE
Ships on Jul 24, 2026
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
This direct bolt-in intercooler upgrade is a high-quality heavy-duty replacement heat exchanger that dramatically improves turbo/inlet air cooling by providing double the cooling surface area and over three times the fluid volume compared to the factory cooler. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Dramatically improves turbo/inlet air cooling Double the cooling surface area of the factory unit No modification install and removal Increases turbo efficiency in extended runs Made in the USA
Show More Show Less

3 Gallon F3x/F8x Stealth Tank
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:558169
Part#: 3G-STMT-F3XF8X
Ships on Jul 24, 2026
$ 229.00 USD
Free Shipping
$ 229.00 USD
Free Shipping
Neatly hides away in the trunk cavity below the deck lid. The Water/Methanol Injection (WMI) pump mounts directly to the bottom of the tank allowing for a quick, clean, and completely stealthy installation. The bottom of the tank includes a sump and baffle, allowing for consistent performance even as the tank drains. Optional upgraded blue billet water/methanol injection (WMI) with 1-way check valve (ES4714530) Features & Benefits Pump mounts directly to the tank (pump sold separately) Works with all DDP 5800 pumps Super low profile design hides under the deck in the existing trunk cavity Available in clear for visually checking fluid levels Includes 2-way vented black plastic cap Threaded mounting points in the feet of the tank Includes a compression pump feed fitting Made in the USA Tank dimensions: L 26.75" x W 9.75" X H 7.5"
Show More Show Less

BMS Stage 1 BMW Performance Tuner - S55 M3/M4
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:402626
Part#: S1-S55
Ships on Jul 24, 2026
$ 399.00 USD
Free Shipping
$ 399.00 USD
Free Shipping
This plug and play BMW tuner attaches to two easy to access sensors in the engine bay and works with your factory DME tuning to remap your boost, timing, and fueling for optimal performance and reduced turbo lag. It features a 64mhz processor allowing sensors to be sampled 800 times per second using dedicated 10 bit digital to analog converters, ensuring smooth and powerful performance! Installation is very discrete and it is quickly removed without a trace when needed. Fuel economy during normal driving is unchanged. Compatible with all driving modes. Stage 1 BMW Tuner Features & Benefits Improves 0-60 times and 1/4 mile times Quick Plug & Play Installation Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Not VIN locked and can be removed without a trace and resold down the road Made in the USA
Show More Show Less