Installing a larger intercooler in your BMW can lower the temperatures of your charged air, giving you the opportunity to make more power. As forced induction BMWs become more popular, intercoolers will be a staple in terms of modifications.
This direct bolt-in intercooler upgrade is a high-quality heavy-duty replacement heat exchanger that dramatically improves turbo/inlet air cooling by providing double the cooling surface area and over three times the fluid volume compared to the factory cooler. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Dramatically improves turbo/inlet air cooling Double the cooling surface area of the factory unit No modification install and removal Increases turbo efficiency in extended runs Made in the USA
Show More Show Less
Garrett Powermax™ direct fit performance charge air cooler for BMW's F8X M2C, M3, and M4 boasts a 47% larger core with dual pass coolant flow to help reduce intake manifold temperatures by an average of 10 degrees Fahrenheit. CFD optimized end tanks improve airflow through the core. An average increase of 12.4 horsepower and 4.9 lb-ft of torque were measured during back-to-back dyno pulls. This direct-fit performance intercooler installs in just over an hour and reuses the stock bolts, hoses, and clamps Features: Supports up to 980hp 47% larger core than stock Installs in stock location Cast aluminum end tanks Air-to-liquid design Bar-and-plate construction Weight: 14.10 lbs Size Specs: 7.2' x 9.8' x 3.6' | 183mm x 249mm x 92mm
Show More Show Less
Garrett Powermax™ direct fit performance charge air cooler for BMW's F8X M2C, M3, and M4 boasts a 47% larger core with dual pass coolant flow to help reduce intake manifold temperatures by an average of 10 degrees Fahrenheit. CFD optimized end tanks improve airflow through the core. An average increase of 12.4 horsepower and 4.9 lb-ft of torque were measured during back-to-back dyno pulls. This direct-fit performance intercooler installs in just over an hour and reuses the stock bolts, hoses, and clamps Features: Supports up to 980hp 47% larger core than stock Installs in stock location Cast aluminum end tanks Air-to-liquid design Bar-and-plate construction Weight: 14.10 lbs Size Specs: 7.2' x 9.8' x 3.6' | 183mm x 249mm x 92mm
Show More Show Less
