Home
Intake
Charge Pipes & Turbo Inlets

Charge Pipes & Turbo Inlets for BMW F80 M3 S55 3.0L

Clear BMW chassis

The factory BMW charge pipes are prone to cracking, as they are made from brittle plastic. Here at Turner, we sell several brands of replacement charge pipes that are typically made from cast aluminum. We recommend upgrading to hard charge pipes even on stock forced induction vehicles to avoid cracking - we've seen cracking occur on high mileage cars running stock power just as frequently as we do with high horsepower builds.

Sort By:

Turner Chargepipes and J-Pipe Combo - S55

T#:2498471

Part#: 005809LA11

In Stock

Sale - Save 25% $ 610.99

This product was last offered at the strikethrough price on
06-14-2026

$ 458.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 610.99

This product was last offered at the strikethrough price on
06-14-2026

$ 458.24 USD

Add to Wish List

Huge upgrade to brittle factory plastic pipes that are prone to failure.

ECS Tuning Turbo Inlet Pipes - BMW F8X M3 M4 S55 3.0L

T#:6940390

Part#: 090765ECS09

In Stock

Sale - Save 10% $ 466.99

This product was last offered at the strikethrough price on
06-14-2026

$ 420.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 466.99

This product was last offered at the strikethrough price on
06-14-2026

$ 420.29 USD

Add to Wish List

BMW's OE turbo inlet pipes leave a lot to be desired thanks to their plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Turbo Inlet Pipe Upgrade! Featuring full aluminum construction, black powder coating, smooth bends, and all the necessary installation components, this inlet pipe set is a plug-and-play addition to your BMW! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume 3-Ply Silicon Coupler

Show More Show Less

Turner Cold Side J Pipe - S55

T#:2498467

Part#: 005809LA10

In Stock

Sale - Save 25% $ 312.99

This product was last offered at the strikethrough price on
06-14-2026

$ 234.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 312.99

This product was last offered at the strikethrough price on
06-14-2026

$ 234.74 USD

Add to Wish List

- Click HERE for Installation Instructions - * C-Clip not included (605534) The S55 OE charge pipe is prone to failure; after all it is plastic. With constant heat cycling, the factory plastic becomes very brittle over time, leading to cracks and boost leaks, and ultimately entire part failures. The OE charge pipe has also been proven to break once under increased boost pressure. Replace the weak OE charge pipe with the Turner S55 Charge pipe for increased air flow, throttle response, and reliability. You can safely and reliably turn up the boost on your S55 once this kit is installed, and not worry about the problematic factory piece. Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution you’ve been looking for! Features: Cold Side Charge Pipe 6061-T6 Aluminum construction for increased durability over the factory plastic charge pipe. Can withstand higher boost pressures while offering OE-like fitment. Billet CNC throttle body flange for OEM fitment Mandrel bent 2.85” tubing (larger than stock) for improved airflow and increased performance. Black powder coated for exceptional durability and corrosion resistance. 4-ply reinforced silicone hose and 6061-T6 powder coated aluminum coupler to retain factory fitment to intercooler. Silicone provides a smooth transition from intercooler outlet to throttle body diameter to maximize flow and volumetric efficiency

Show More Show Less

Turner Hot Side Charge Pipes - S55

T#:2498463

Part#: 005809LA09

In Stock

Sale - Save 25% $ 438.99

This product was last offered at the strikethrough price on
06-14-2026

$ 329.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 438.99

This product was last offered at the strikethrough price on
06-14-2026

$ 329.24 USD

Add to Wish List

Upgrade the OE parts that are prone to failure!

FTP Inlet Pipe Kit - BMW S55

T#:598513

Part#: SG71448

Ships on Oct 20, 2026

$ 330.00 USD

Add to Wish List

Qty

$ 330.00 USD

Add to Wish List

Enhance the performance of your BMW with the S55 Turbo Intake Pipe. Designed to address the limitations of the original pipe, this upgrade is essential for boosting the turbocharger or increasing boost value. By improving airflow into the turbo, this intake pipe enhances turbo response, increases airflow, and reduces turbo lag. Enjoy increased flow and a direct OEM replacement with this 3-ply silicon coupler intake pipe.

Benefits:

Improves turbo response
Increases airflow
Reduces turbo lag
Direct OEM replacement for easy installation

Show More Show Less

FTP Motorsport Charge Pipe Kit - V2 - F8X M3/M4/M2 Competition ...

T#:578679

Part#: SG71350

Ships on Oct 13, 2026

$ 470.00 USD

Add to Wish List

Qty

$ 470.00 USD

Add to Wish List

This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug

Show More Show Less

Vargas Turbo Silicone Charge pipes - Blue - S55

T#:390441

Part#: VPP-S55-SIL-1B

Ships in 10 Business Days

$ 418.99 USD

Add to Wish List

Qty

$ 418.99 USD

Add to Wish List

Looking to get the most efficient turbocharger operation out of your S55 powered BMW? The best way to do this is to remove all restriction from the inlet, and charge tract. The factory charge pipes are poorly designed due to being completely flattened coming out of the turbos, before the intercooler. These VTT S55 silicone charge pipes get rid of those restrictions and provide a full 2″ ID from the turbochargers into the intercooler, as well as not allowing any heat soak to occur like other aluminum pipes on the market. The VTT charge pipes are a full 7 ply wire reinforced silicone, with an extra layer of silicone on the interior, tested to over 150psi. They are available in 3 colors. Black with a Blue interior layer, Blue with a Red interior layer, and Red with a Black interior layer. These charge pipes fit all S55 powered BMW M3/M4’s.

Show More Show Less

BMW S55 3.0L Silicone Charge pipes - Red

T#:390442

Part#: VPP-S55-SIL-1R

Ships in 10 Business Days

$ 418.99 USD

Add to Wish List

Qty

$ 418.99 USD

Add to Wish List

Upgrade Your S55 Powered BMW with VTT S55 Silicone Charge Pipes

Enhance turbocharger operation efficiency with VTT S55 Silicone Charge Pipes for your BMW. These pipes remove restrictions in the inlet and charge air tract, ensuring a full 2" ID from the turbochargers to the intercooler. Unlike factory pipes, which restrict airflow due to flattening, VTT charge pipes optimize airflow. Constructed of 7-ply wire reinforced silicone, they withstand over 150psi and feature an additional silicone layer for reduced heat soak. Choose from three color options: Black with Blue interior, Blue with Red interior, or Red with Black interior. This kit includes 2 silicone charge pipes, 2 billet turbocharger outlet adapters, and stainless steel clamps for easy installation on all S55 powered BMW M3/M4's.

Benefits:

Eliminates restrictions for efficient turbocharger operation
Provides a full 2" ID from turbochargers to intercooler
Reduces potential heat soak with silicone construction
Durable design tested to over 150psi
Available in 3 color options: Black/Blue, Blue/Red, Red/Black

Show More Show Less

MMX Charge Pipe Kit - S55 F8x M2 Comp/M3/M4

T#:4552007

Part#: MMR02-1001

Ships in 2 Business Days

$ 715.99 USD

Add to Wish List

Qty

$ 715.99 USD

Add to Wish List

MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your S55 Powered F8x M2 Comp/M3/M4. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Three high-flow aluminum charge pipes with CNC leak-free connections Three silicone coupler hoses c-clips Jubilee clips

Show More Show Less

Vargas Silicone Charge Pipes - Blue - BMW F8X M2, M3, M4

T#:51813336

Part#: VTT-S55-SIL-1-BL

Ships in 10 Business Days

$ 409.99 USD

Add to Wish List

Qty

$ 409.99 USD

Add to Wish List

Upgrade your S55 engine's breathability with the VTT Silicone Charge Pipe Bundle in blue.

Vargas Silicone Charge Pipes - Red - BMW F8X M2, M3, M4

T#:51813337

Part#: VTT-S55-SIL-1-RD

Ships in 10 Business Days

$ 409.99 USD

Add to Wish List

Qty

$ 409.99 USD

Add to Wish List

Upgrade your engine bay’s durability and style with the Vargas Red Silicone Charge Pipe.

Select Vehicle

Purpose

Performance (11)

Category

Home
Intake

Charge Pipes & Turbo Inlets

Brand

Price

Special Offers

Shipping