BMW Suspension Parts for BMW F80 M3 S55 3.0L

Turner Dual-Mount Differential Plate - With ECS Poly Diff Bushings - ...

T#:589795

Part#: 026773TMS03KT

In Stock

Sale - Save 25% $ 1,019.99

This product was last offered at the strikethrough price on
06-14-2026

$ 764.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 1,019.99

This product was last offered at the strikethrough price on
06-14-2026

$ 764.99 USD

Add to Wish List

Allows for the addition of a second rear-position differential bushing, and allows for a more enhanced driving experience by removing unwanted movement. Engineered by Turner to withstand extreme driveline forces. Featuring ECS Poly Diff Bushing kit for maximum performance & handling.

Show More Show Less

Turner Monoball Thrust Arm Bearing Set - F8x M2/M3/M4

T#:397172

Part#: 023671TMS01

In Stock

Sale - Save 20% $ 464.99

This product was last offered at the strikethrough price on
06-13-2026

$ 371.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 464.99

This product was last offered at the strikethrough price on
06-13-2026

$ 371.99 USD

Add to Wish List

BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.

Show More Show Less

Turner Motorsport Thrust Arm Monoball Upgrade - Pre-installed Arms - ...

T#:401100

Part#: 023671TMS01-02

In Stock

Sale - Save 5% $ 840.99

This product was last offered at the strikethrough price on
06-14-2026

$ 798.94 USD

Add to Wish List

Qty

Sale - Save 5%

$ 840.99

This product was last offered at the strikethrough price on
06-14-2026

$ 798.94 USD

Add to Wish List

BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.

Show More Show Less

Turner Performance Adjustable Front Lower Control Arms - F87 M2, F80 ...

T#:588022

Part#: 025990TMS03

In Stock

Sale - Save 3% $ 937.99

This product was last offered at the strikethrough price on
06-14-2026

$ 909.85 USD

Add to Wish List

Qty

Sale - Save 3%

$ 937.99

This product was last offered at the strikethrough price on
06-14-2026

$ 909.85 USD

Add to Wish List

Looking for upgraded lower control arms that don't limit adjustment capabilities like the OE control arms? These Turner Performance Lower Control Arms may be exactly what you need! These CNC'd billet aluminum control arms allow you to adjust roll center, camber, and track width easily and lock in your adjustments securely. The construction of these control arms allows for significant weight savings, reducing unsprung weight, while maintaining high levels of strength that is up to track use and abuse. Instead of using traditional jam nuts, these Turner Control Arms utilize a pinch bolt and rotating clamp design that allows high clamping forces to lock in track width and camper specifications without making it difficult to keep bearings properly aligned. Stainless steel spacers are included to enable roll center correction for lowered vehicles. To further improve control arm operation over the OE design, these control arms use FK rod ends and high misalignment solid spherical bushings to get rid of binding and flex. Features: Lightweight Aluminum, Titanium, Chromoly and Stainless Steel construction Correct ball joint angle for full articulation Clamp design allows for easy access to lock down your alignment settings Low friction 3-piece Teflon lined FK spherical bushings and Heim joints/rod ends Multiple size stainless steel roll center spacers for precise adjustment

Show More Show Less

Turner Monoball Rear Upper Control Arm Bushings - F8x M2, M2 Comp, M3...

T#:2104260

Part#: 006261LA01

In Stock

Sale - Save 10% $ 354.99

This product was last offered at the strikethrough price on
06-14-2026

$ 319.49 USD

Add to Wish List

Qty

Sale - Save 10%

$ 354.99

This product was last offered at the strikethrough price on
06-14-2026

$ 319.49 USD

Add to Wish List

BMW’s are known to have failure prone rear control arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the rear wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer F80, F82, F83, and F87 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered. We offer these control arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms. Features: Bearing housing Precision CNC machined from 6061-T6 blue anodized aluminum Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands. CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. Bearing OEM BMW sealed and greased ball joint for exceptional durability and service life. Performance Nearly instantaneous, crisp steering and braking response. Maintenance free, long lasting performance. Improved road feel without undesirable NVH.

Show More Show Less

Turner Dual Mount Diff Plate - With Extra Rear Position ECS Poly Bush...

Polyurethane bushings are needed for this kit!

T#:589796

Part#: 026773TMS04KT

In Stock

Sale - Save 25% $ 588.99

This product was last offered at the strikethrough price on
06-14-2026

$ 441.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 588.99

This product was last offered at the strikethrough price on
06-14-2026

$ 441.74 USD

Add to Wish List

Turner Dual Mount Diff Plate with an Extra ECS Rear Poly Bushing for the second subframe diff mount. ONLY FOR USE WITH EXISTING INSTALLED POLY BUSHINGS!

Turner Front Adjustable Camber Plates - Race - F8X M3 M4

For vehicles without EDC

T#:598700

Part#: 023429TMSKT2

In Stock

Sale - Save 20% $ 518.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 415.19 USD

Add to Wish List

Sale - Save 20%

$ 518.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 415.19 USD

Add to Wish List

One of the tricks for getting your F8x M3 or M4 to handle better is to add negative camber to the front wheels. This will put more of the tire's width in contact with the ground during cornering. With more rubber, there is more grip. BMWs typically have less camber in the front to create understeer, but if you're running a stock setup on the track or autocross, you are giving up speed and time as the front tires run out of grip sooner than they should. Designed in-house for the highest quality and longevity possible, we are confident our Race Camber Plates are the perfect solution for your F8X BMW M! These camber plates are fully compatible with OEM bump stops, factory style springs. and include all needed installation hardware!

Show More Show Less

Turner Motorsport Performance Rear Sway Bar End Links - F8X M2 M3 M4 ...

T#:637368

Part#: 025990TMS011

In Stock

Sale - Save 3% $ 321.99

This product was last offered at the strikethrough price on
06-14-2026

$ 312.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 321.99

This product was last offered at the strikethrough price on
06-14-2026

$ 312.33 USD

Add to Wish List

Looking to get the most out of your swaybar? We suggest upgrading to our brand new Performance Rear End Links. Our new line of F8X rear end links feature length-adjustability for eliminating preload on sway bars, Teflon lined FK 1/2" bearings which prove higher load capacities than stock rubber bushings, and heat-treated Chromoly High Misalignment studs that offer extreme articulation, 65 degrees in total, to prevent binding.

Show More Show Less

Performance Adjustable Rear Toe Links - BMW F8X M2 M3 M4, G8X M3 M4 B...

T#:5471051

Part#: 00501TMS09

In Stock

Sale - Save 5% $ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD

Add to Wish List

The stock Genuine BMW rear toe links (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Toe Links increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments. Even small changes to ride height and camber will effect toe settings, and the wide range of adjustment allows you to maximize grip on a track car and extend tire life on a street car. The factory rear toe arms utilize an eccentric bolt and washer for adjustment and lack precision and range. These toe links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. Best if tightened to 73.7 ft. lbs. (100 N/M). DO NOT OVERTORQUE! ECS is not liable for any issues due to overtorque. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA

Show More Show Less

Turner BMW Dual Mount Diff Plate - With Extra Rear Position OE Bushin...

T#:589799

Part#: 26773TMS05KT

In Stock

Sale - Save 25% $ 624.99

This product was last offered at the strikethrough price on
06-14-2026

$ 468.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 624.99

This product was last offered at the strikethrough price on
06-14-2026

$ 468.74 USD

Add to Wish List

Turner Complete Performance Adjustable Suspension Upgrade Kit - F80 M...

T#:1271582

Part#: F8XPERFSUSFR2KT

In Stock

Sale - Save 7% $ 3,512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 3,277.60 USD

Add to Wish List

Qty

Sale - Save 7%

$ 3,512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 3,277.60 USD

Add to Wish List

Having issues with bump steer or sway bar preload in your lowered car? Looking for wider range of suspension adjustability? Look no further! This comprehensive kit contains all of the parts used and recommended by Turner Motorsport to correct, upgrade, and fine tune your suspension to your liking! From roll-center correction to widened range of adjustment over factory eccentric bolts, the parts in this kit have got you covered. Make the most of your BMW by replacing the slop of rubber bushings with spherical bearings and eliminating the limited adjustability of the factory suspension geometry. This kit contains: Front: Lower Control Arms - Roll center, camber, track width, and headlight leveling adjustability Thrust Arms - Caster adjustment Tie Rod Ends - Bump steer, roll center, and tie rod binding correction Rear: Adjustable Toe Arms - Increased range of adjustment and low suspension deflection Upper Control Arms - Upgraded durability over weak OEM linkages Traction Arms - Adjustable length and reduced deflection

Show More Show Less

Turner Motorsport Control Arm Monoball Upgrade Kit

T#:2528148

Part#: 006261LA09

In Stock at Vendor

Sale - Save 3% $ 2,028.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,968.12 USD

Add to Wish List

Qty

Sale - Save 3%

$ 2,028.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,968.12 USD

Add to Wish List

BMW’s are known to have failure prone rear control arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the rear wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer F80, F82, F83, and F87 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered. We offer these control arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms. Features: Bearing housing Precision CNC machined from 6061-T6 blue anodized aluminum Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands. CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. Bearing OEM BMW sealed and greased ball joint for exceptional durability and service life. Performance Nearly instantaneous, crisp steering and braking response. Maintenance free, long lasting performance. Improved road feel without undesirable NVH.

Show More Show Less

Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Tapered Sea...

T#:340476

Part#: TSU9980548

Ships on Nov 30, 2026

Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

Sale - Save 25%

$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Show More Show Less

Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Square Seat...

T#:340477

Part#: TSU998062A

Ships on Nov 30, 2026

Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

Sale - Save 25%

$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Show More Show Less

Rod End Boot (14-18mm) - Priced Each

T#:599632

Part#: RERS3

In Stock

Sale - Save 43% $ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Qty

Sale - Save 43%

$ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.

Show More Show Less

Performance Suspension Cup Kit - Non-EDC - BMW F80 M3, F82 M4 ...

For vehicles without EDC (Electronic Dampening Control)

T#:42638615

Part#: F8XCUPKT

Ships on Nov 30, 2026

Sale - Save 3% $ 1,449.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,413.28 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,449.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,413.28 USD

Add to Wish List

Give your F8X BMW the stance and handling it deserves with this Performance Suspension Kit. Featuring Bilstein B6 shocks and ECS Lowering Springs, it sharpens cornering and reduces wheel gap, all without compromising ride comfort. A perfect upgrade for drivers who want sportier performance and a more aggressive look.

Show More Show Less

Bav Auto Trailing Arm Inner Bushing Tool - Master Set

Be sure to add some grease to the rods in this tool set during installation to prevent breakage.

T#:580442

Part#: B8800137

In Stock

Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Qty

Sale - Save 3%

$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.

Show More Show Less

Bav Auto Scissor Type Ball Joint / Tie Rod Separator

T#:580366

Part#: B8800042

In Stock

Sale - Save 15% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Use this tool to separate control arm ball-joints and larger tie-rod end joints. This tool is particularly beneficial when dealing with tight locations that prevent the use of non-scissor separator tools. Note that max jaw opening is 1 3/4".

Show More Show Less