BMW Suspension Parts for BMW F80 M3 S55 3.0L

Powerflex Rear Diff Rear Mounting Bushing - F8X M2,M3,M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:554716

Part#: PFR5-4026

In Stock

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

Show More Show Less

Powerflex Dual Mount Diff Bracket - BMW F8X M2/M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14023858

Part#: PFR5-4030

In Stock

$ 309.99 USD

Add to Wish List

Qty

$ 309.99 USD

Add to Wish List

NOTE: We suggest replacing 3 of BMW # 31126760203 during installation Kit comes supplied with M14 mounting bolt, thread locker, and a Powerflex keyring. With the newer F8x M2/M3/M4's making big power and having superb chassis straight from the showroom, it's no wonder they're often found at the most serious of track-days or at tuning shops around the globe. Unfortunately, the power that makes these cars so fun to drive eventually has an impact on the vehicles' suspension components- most notably the rear differential bushings. Despite having alloted for two mounting bushings on the factory tubular subframe, BMW opts to use only a single offset bushing in the rear to mount the diff bracket to the subframe. This essentially creates a pivot point for the diff under torque loading, especially if the 4x front diff bushes are worn out and softer than they once were. With hard launches and sudden and frequent on-off throttle changes, the single rear OE rubber bushing is subject to extreme torsional and directional forces, resulting in rapid degradation with failure often seen at around the 30,000-40,000 mile mark, and an unsettled and potentially clunky rear-end. The PFR5-4030 Dual Mount Diff Bracket is made from our in-house CNC machined 6082 High-Tensile Aluminum, and is designed to utilize the secondary mounting position on the OE subframe. With the addition of a second bushing, this prevents the diff from twisting under load, providing benefits such as: Reduced drivetrain movement Improved throttle response A more controlled and consistent chassis response to acceleration/deceleration Improved tire-to-road power transfer due to reduced wheel hop Reduced strain on bushings The corrosion-resistant, satin black, anodized aluminum bracket is optimized for high stress and deflection while withstanding high torque loads, but serves the same purpose in road-use and track-use cars with either a single OE bushing or dual aftermarket bushings. Although the bracket can be fitted without the need to remove the subframe from the vehicle completely, we would strongly recommend combining Powerflex products by using our already hugely popular 80A durometer PFR5-4026 Rear Diff Rear Mounting Bushings for both rear mounting positions alongside our PFR5-4025 Rear Diff Front Mounting Bushings in the front for the ultimate in differential control and a lasting street or track solution.

Show More Show Less

Powerflex Rear Diff Front Mounting Bushing - F8X M2,M3,M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:554720

Part#: PFR5-4025X4

In Stock

$ 346.99 USD

Add to Wish List

Qty

$ 346.99 USD

Add to Wish List

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

Show More Show Less

BMW F8X & G8X M2 / M3 / M4 Powerflex Rear Diff Rear Mounting Bushing ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:554715

Part#: PFR5-4026B

In Stock

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

Show More Show Less

Rear Sway Bar Bushing - 25mm - Street

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22163393

Part#: PFR5-4013-25

Ships in 1 Business Day

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

When using PowerFlex Street Series Rear 25 mm Sway Bar Bushings for your BMW F80/F82F83, you will experience the benefits of a product that is made from the best material - polyurethane. You will feel: Enhanced Handling and Performance: Upgrading to Powerflex 25 mm rear sway bar bushings is like giving your car a secret performance boost. These bushings are designed to provide better control and stability during sharp turns and quick maneuvers. When you hit those curves, you'll feel your car hugging the road more confidently. Reduced Body Roll: One of the immediate benefits you'll notice is a reduction in body roll. Say goodbye to that sensation of leaning heavily when taking corners. The 14mm rear sway bar bushings work hard to keep your car's body level, resulting in a smoother and more comfortable ride. Improved Grip A better grip on the road is a game-changer, especially if you enjoy spirited driving or track days. With these beefier bushings, your rear tires will stay planted, offering improved traction. Whether you're accelerating out of a turn or holding a steady line, the enhanced grip is your new best friend. Sharper Steering Response: Tired of sluggish steering? These upgraded bushings can sharpen your car's steering response. You'll feel more in control of your vehicle, with quicker reactions to your steering inputs. It's like having a direct line of communication between you and the road. All Powerflex bushings come with a lifetime warranty Fits these BMW models: F80 M3 F82 M4 F83 M4

Show More Show Less

Powerflex Rear Diff Front Mounting Bushing - F8X M2,M3,M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:554719

Part#: PFR5-4025BX4

In Stock

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Show More Show Less

BMW F80 M3 / F82 & F83 M4 Front Radius Arm To Chassis Bushings ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7828849

Part#: PFF5-4001

Ships in 1 Business Day

$ 230.99 USD

Add to Wish List

Qty

$ 230.99 USD

Add to Wish List

Replace your inner control arm bushings with performance Powerflex bushings to tighten up your control and improve stability. *Door Buster Special - New Product* This is a replacement part that uses the Black Series material to boost stiffness over the original part by 18% to withstand increased loading seen by this position on the car. If the control arm bushings on your vehicle are beginning to fail, it will become quickly apparent. Suspension noise will be drastically increased, there will be steering wheel shake when hitting road hazards, and the entire car will have an all around loose feel. This can also lead to premature tire failure as alignment is negatively affected. Replace your control arm bushings to give your entire suspension a tighter feel. Rattling over bumps, a loose feeling when driving, and play in the front wheels is the main indicator that your bushings may be failing. The stock rubber tends to get dry rotted, wear out, and cause play in the attachment point for the control arm. Replace yours when they wear out, or when replacing a control arm that didn't include these pieces.

Show More Show Less

F80, F82, F83, F87 Dinan Monoball Front Thrust Arm Bushings (Pair) ...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:396651

Part#: D280-0017

Ships in 5 Business Days

11% off MSRP $ 598.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 531.99 USD

Add to Wish List

Qty

11% off MSRP

$ 598.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 531.99 USD

Add to Wish List

For someone looking for superior performance and longevity these sealed monoball bushings are the best upper thrust bearing you can buy for an E82 1-series or E9X 3-series. The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. The condition worsens as the bushing wears out. The Dinan monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings.

Show More Show Less

BMW F8X - Powerflex Radius Arm To Chassis Bushings - Caster Adjustabl...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21637213

Part#: PFF5-4001G

Ships in 1 Business Day

$ 279.99 USD

Add to Wish List

Qty

$ 279.99 USD

Add to Wish List

When you opt to enhance your BMW F80, F82, F83, or F87 with Radius Arm to Chassis Bushings, you unlock a multitude of advantages. These include: Enhanced Handling: Radius Arm to Chassis Bushings elevate your BMW's handling to a higher level, granting exceptional control, especially during demanding maneuvers and sharp corners. This translates to an improved sense of stability on the road. Reduced Vibration and Noise: These bushings excel at reducing vibrations and dampening noise, leading to a quieter and smoother driving experience. Your ride quality becomes more refined, enhancing overall comfort. Improved Steering Response: Bid farewell to unresponsive steering. Radius Arm to Chassis Bushings enhance your BMW's steering response, delivering precise and immediate control, akin to forging a direct connection with the road. Extended Component Lifespan: Opting for high-quality bushings extends the lifespan of various suspension components. They exhibit superior durability compared to stock bushings, which translates to fewer replacements and increased longevity. Enhanced Traction: Whether you're passionate about spirited driving or partake in track activities, these bushings provide superior traction. Your BMW maintains consistent contact with the road surface, allowing you to confidently explore your vehicle's performance limits. OE / OEM Cross Reference Numbers: 31122284531/ 31122284532 / 31122283579 Fits these BMW models: F80 - M3 F82 - M4 F87 - M2

Show More Show Less

F87 M2, F8X M3/M4 Dinan Tubular Adjustable Sway Bar Set

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389134

Part#: D120-0605

Ships in 5 Business Days

11% off MSRP $ 1,068.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 949.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,068.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 949.99 USD

Add to Wish List

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the F8X M3/M4 and F87 M2 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front and rear bars are hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension.

Show More Show Less

BMW F8X M3 M3 M4 Rear Suspension Link Kit

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:554937

Part#: D280-0015

Ships in 5 Business Days

11% off MSRP $ 1,181.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,049.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,181.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,049.99 USD

Add to Wish List

BMW F8X M3 M4 Rear Suspension Link Kit is designed to enhance the handling and stability of your high-performance BMW. This kit eliminates the vagueness and flex commonly associated with stock rear suspension links, which rely on rubber bushings that can flex under load. By replacing these with Teflon-coated, machined steel rod ends and billet aluminum rods, this kit ensures a more planted and secure feel, especially during hard acceleration, braking, and cornering. The rods feature a hex design for easy adjustments, making it an ideal upgrade for those running larger wheels and tires.

Improved Stability: Eliminates flex under acceleration, braking, and cornering for a more secure feel.
High-Quality Materials: Teflon-coated, machined steel rod ends and billet aluminum rods.
Adjustable Design: Hex machined center rods for easy adjustment.
Enhanced Handling: Reduces vagueness and provides a more planted driving experience.
Ideal for Upgrades: Recommended for use with larger wheels and tires.
Turner Motorsport Quality: Trusted performance parts backed by over 35 years of BMW tuning expertise.

Show More Show Less

Powerflex Silicone Grease

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:362715

Part#: PCG1

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

The Powerflex silicone grease is the only lubricant we suggest for long, squeak free operation. The lubricant contains silicone that resists heat and water and keeps a more constant viscosity to allow it to stay in the bushing as temperatures increase. The lubricant also does not lose it's lubrication properties over time like an anti-seize type lubricant. Each pack will lube 2 large bushings or 4 small.

Show More Show Less

BMW F8X - Powerflex Rear Sway Bar Bushing - 22.9mm - Street - PFR5-40...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21637215

Part#: PFR5-4013-22.9

Ships in 1 Business Day

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW F80 M3 S55 3.0L

Sub-Categories

Powerflex Rear Diff Rear Mounting Bushing - F8X M2,M3,M4

Powerflex Dual Mount Diff Bracket - BMW F8X M2/M3/M4

Powerflex Rear Diff Front Mounting Bushing - F8X M2,M3,M4

BMW F8X & G8X M2 / M3 / M4 Powerflex Rear Diff Rear Mounting Bushing ...

Rear Sway Bar Bushing - 25mm - Street

Powerflex Rear Diff Front Mounting Bushing - F8X M2,M3,M4

BMW F80 M3 / F82 & F83 M4 Front Radius Arm To Chassis Bushings ...

F80, F82, F83, F87 Dinan Monoball Front Thrust Arm Bushings (Pair) ...

BMW F8X - Powerflex Radius Arm To Chassis Bushings - Caster Adjustabl...

F87 M2, F8X M3/M4 Dinan Tubular Adjustable Sway Bar Set

BMW F8X M3 M3 M4 Rear Suspension Link Kit

Powerflex Silicone Grease

BMW F8X - Powerflex Rear Sway Bar Bushing - 22.9mm - Street - PFR5-40...

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results