BMW Suspension Parts for BMW F80 M3 S55 3.0L

Ohlins Road And Track DFV Coilovers - F80/F82 M3 M4, F87 M2

T#:593661

Part#: BMU MR41

In Stock

$ 3,668.99 USD

Add to Wish List

Qty

$ 3,668.99 USD

Add to Wish List

Ohlins Racing has a long history dating back to 1976 of providing premium motorcycle and automotive suspension systems to numerous racing teams, individual racers, and OE brands such as BMW Motorsport, Audi, Lamborghini. Pagani, Ducati and Kawasaki. Over time, thanks to extensive R&D, testing, and tuning, their products have evolved into some of the highest quality suspension systems in the world, providing years of flawless operation on both the street and the track. Ohlins' latest automotive suspension system, the DFV (Dual Flow Valve) Road and Track Coilover Kit, has bridged the gap between comfortable stock suspension and track focused coilover kits. These kits provide a ride that glides over typical bumps and dips in the road, all without the typical hard rattle and harsh feel of usual coilovers, and turn in tight and maintain tire grip and traction in corners significantly better than stock suspension ever could. This is all thanks to the spring rate chosen and Ohlins and their signature Dual Flow Valve. The DFV maintains comfort and agility by giving the same characteristics for both rebound and compression, allowing the wheel and tire to maintain constant contact with the road/track for maximum control. The Dual Flow Valve works by controlling shock fluid flow based on resistance and impact velocity. This is controlled in both compression and rebound, giving the quick shock operation that helps maintain traction. At low shaft travel speeds, oil flows mostly through the shaft jet bleed. At higher shaft speeds, oil flows mostly through the compression/rebound ports in the piston. At very high shaft speeds, or during sudden accelerations from potholes or large bumps in the road, oil can then escape through the ports in the DFV, absorbing a large amount of energy that would otherwise throw off the balance and control of the vehicle and keeping the tire planted firmly on the ground. With all three compression and rebound ports working together according to pressure and shaft speed, the result is the notorious premium suspension feel that only Ohlins can offer. In addition to managing the rebound and compression control, coilovers must also properly address heat changes in the shock oil. As the shock is pushed harder and longer, the oil quickly heats up due to friction and compression, and the oils flow characteristics change. The hotter the oil is, the easier it is for it to travel through ports and valves. To prevent this typical fade in control, Ohlins has implemented a temperature controlled needle bleed valve system that will expand as temperatures rise, slowly increasing restriction in the fluids flow through the valve gap. This produces a consistent dampening rate that maintains the vehicle's suspension characteristics lap after lap, turn after turn, no matter how hard you push your suspension's capabilities. Features: DFV (Dual Flow Valve) Adjustable ride-height Fully rebuildable Corrosion salt spray tested (ISO 9227) Includes hardware and installation instructions 2 year Limited Warranty Specs: Recommended Front Spring Rating: 515 lbs/in ( 9 k/mm) Recommended Rear Spring Rating: 1087 lbs/in ( 19 k/mm) *Now available are optional EDC Cancellation Modules that will prevent any lights or issues with suspension control systems. Turner Motorsport reccommends purchasing these in addition to the suspension kit to get the most out of your Ohlins suspension system. Ohlins Racing has a long history dating back to 1976 of providing premium motorcycle and automotive suspension systems to numerous racing teams, individual racers, and OE brands such as BMW Motorsport, Audi, Lamborghini. Pagani, Ducati and Kawasaki. Over time, thanks to extensive R&D, testing, and tuning, their products have evolved into some of the highest quality suspension systems in the world, providing years of flawless operation on both the street and the track. Ohlins' latest automotive suspension system, the DFV (Dual Flow Valve) Road and Track Coilover Kit, has bridged the gap between comfortable stock suspension and track focused coilover kits. These kits provide a ride that glides over typical bumps and dips in the road, all without the typical hard rattle and harsh feel of usual coilovers, and turn in tight and maintain tire grip and traction in corners significantly better than stock suspension ever could. This is all thanks to the spring rate chosen and Ohlins and their signature Dual Flow Valve. The DFV maintains comfort and agility by giving the same characteristics for both rebound and compression, allowing the wheel and tire to maintain constant contact with the road/track for maximum control. The Dual Flow Valve works by controlling shock fluid flow based on resistance and impact velocity. This is controlled in both compression and rebound, giving the quick shock operation that helps maintain traction. At low shaft travel speeds, oil flows mostly through the shaft jet bleed. At higher shaft speeds, oil flows mostly through the compression/rebound ports in the piston. At very high shaft speeds, or during sudden accelerations from potholes or large bumps in the road, oil can then escape through the ports in the DFV, absorbing a large amount of energy that would otherwise throw off the balance and control of the vehicle and keeping the tire planted firmly on the ground. With all three compression and rebound ports working together according to pressure and shaft speed, the result is the notorious premium suspension feel that only Ohlins can offer. In addition to managing the rebound and compression control, coilovers must also properly address heat changes in the shock oil. As the shock is pushed harder and longer, the oil quickly heats up due to friction and compression, and the oils flow characteristics change. The hotter the oil is, the easier it is for it to travel through ports and valves. To prevent this typical fade in control, Ohlins has implemented a temperature controlled needle bleed valve system that will expand as temperatures rise, slowly increasing restriction in the fluids flow through the valve gap. This produces a consistent dampening rate that maintains the vehicle's suspension characteristics lap after lap, turn after turn, no matter how hard you push your suspension's capabilities. Features: DFV (Dual Flow Valve) Adjustable ride-height Fully rebuildable Corrosion salt spray tested (ISO 9227) Includes hardware and installation instructions 2 year Limited Warranty Specs: Recommended Front Spring Rating: 515 lbs/in ( 9 k/mm) Recommended Rear Spring Rating: 1087 lbs/in ( 19 k/mm) *Now available are optional EDC Cancellation Modules that will prevent any lights or issues with suspension control systems. Turner Motorsport recommends purchasing these in addition to the suspension kit to get the most out of your Ohlins suspension system. Fits the following BMWs: 2013+ F80/82 BMW M3 M4 2016+ F87 BMW M2

Show More Show Less

Ohlins EDC Cancellation Kit - BMW M3 F80, M4 F82

T#:405066

Part#: 35020-02

In Stock at Vendor

$ 655.99 USD

Add to Wish List

Qty

$ 655.99 USD

Add to Wish List

The öhlins EDC Cancellation Kit for Road & Track deactivates control lamps and error reports when electronically adjustable OEM suspension is replaced by a mechanical system. The cancellation kit is just plugged into the original suspension controls. No further programming is needed.

Show More Show Less

Ohlins TTX-Pro Coilover System - BMW F80/82 M3 M4, F87 M2 Comp ...

T#:43412437

Part#: BMV MU21S1

Ships on Sep 21, 2026

$ 10,200.00 USD

Add to Wish List

Qty

$ 10,200.00 USD

Add to Wish List

Transform your M2 into the ultimate race car and take your track days to the next level. With racing-caliber damping technology and technical features, the öhlins Advanced Track Day kit delivers unparalleled performance and precision to help you dominate the track. Gear up to conquer every corner and set your fastest lap times yet—we’ll see you at the finish line.

Show More Show Less

Turner Complete Performance Adjustable Suspension Upgrade Kit - F80 M...

10X Entries Into Our F80 M3 Sweepstakes

T#:1271582

Part#: F8XPERFSUSFR2KT

In Stock

Sale - Save 7% $ 3,512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 3,277.60 USD

Add to Wish List

Qty

Sale - Save 7%

$ 3,512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 3,277.60 USD

Add to Wish List

Having issues with bump steer or sway bar preload in your lowered car? Looking for wider range of suspension adjustability? Look no further! This comprehensive kit contains all of the parts used and recommended by Turner Motorsport to correct, upgrade, and fine tune your suspension to your liking! From roll-center correction to widened range of adjustment over factory eccentric bolts, the parts in this kit have got you covered. Make the most of your BMW by replacing the slop of rubber bushings with spherical bearings and eliminating the limited adjustability of the factory suspension geometry. This kit contains: Front: Lower Control Arms - Roll center, camber, track width, and headlight leveling adjustability Thrust Arms - Caster adjustment Tie Rod Ends - Bump steer, roll center, and tie rod binding correction Rear: Adjustable Toe Arms - Increased range of adjustment and low suspension deflection Upper Control Arms - Upgraded durability over weak OEM linkages Traction Arms - Adjustable length and reduced deflection

Show More Show Less

OE Front Control Arm Refresh Kit - F8X M2 M3 M4

10X Entries Into Our F80 M3 Sweepstakes

T#:30463959

Part#: F80-OE-FCARKT2

In Stock

$ 1,016.99

This product was last offered at the strikethrough price on
05-07-2026

$ 1,003.99 USD

Add to Wish List

Qty

$ 1,003.99 USD

Add to Wish List

Upgrade your BMW’s front suspension with our high-quality Front Suspension Control Arm Kit, designed to restore stability and precision to your vehicle. Over time, worn control arms can lead to creaking, groaning, and instability, especially at highway speeds. Our comprehensive kit ensures a complete overhaul with all necessary components pre-assembled for easy installation.

Key Features:

Enhanced Stability: Say goodbye to wandering and instability on the road with new, durable control arms. Complete Solution: Our kit includes all four front control arms, two ball joints, and essential installation hardware. Premium Quality: Assembled by enthusiasts at ECS Tuning, ensuring top-notch performance and reliability. Ready for Installation: All related ball joints and bushings are pre-installed, saving you time and effort. Kit Includes:

4 Front Control Arms Installation Hardware Give your BMW the suspension upgrade it deserves. Enhance your driving experience with our Front Suspension Control Arm Kit and enjoy the confidence of driving a well-maintained vehicle. Order now and experience the difference in ride quality and stability.

Show More Show Less

Performance Suspension Cup Kit - Non-EDC - BMW F80 M3, F82 M4 ...

For vehicles without EDC (Electronic Dampening Control)

10X Entries Into Our F80 M3 Sweepstakes

T#:42638615

Part#: F8XCUPKT

Ships on Jan 14, 2027

Sale - Save 3% $ 1,449.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,413.28 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,449.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,413.28 USD

Add to Wish List

Give your F8X BMW the stance and handling it deserves with this Performance Suspension Kit. Featuring Bilstein B6 shocks and ECS Lowering Springs, it sharpens cornering and reduces wheel gap, all without compromising ride comfort. A perfect upgrade for drivers who want sportier performance and a more aggressive look.

Show More Show Less

Performance Suspension Cup Kit - EDC - BMW F80 M3, F82 M4

For vehicles with EDC (Electronic Dampening Control)

10X Entries Into Our F80 M3 Sweepstakes

T#:42638616

Part#: F8XCUPEDCKT

In Stock

$ 2,756.99 USD

Add to Wish List

Qty

$ 2,756.99 USD

Add to Wish List

Give your F8X BMW the stance and handling it deserves with this Performance Suspension Kit. Featuring Bilstein B6 shocks and ECS Lowering Springs, it sharpens cornering and reduces wheel gap, all without compromising ride comfort. A perfect upgrade for drivers who want sportier performance and a more aggressive look.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW F80 M3 S55 3.0L

Sub-Categories

Ohlins Road And Track DFV Coilovers - F80/F82 M3 M4, F87 M2

Ohlins EDC Cancellation Kit - BMW M3 F80, M4 F82

Ohlins TTX-Pro Coilover System - BMW F80/82 M3 M4, F87 M2 Comp ...

Turner Complete Performance Adjustable Suspension Upgrade Kit - F80 M...

OE Front Control Arm Refresh Kit - F8X M2 M3 M4

Performance Suspension Cup Kit - Non-EDC - BMW F80 M3, F82 M4 ...

Performance Suspension Cup Kit - EDC - BMW F80 M3, F82 M4

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results