Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW F80 Drilled & Slotted Brake Rotors

BMW F80 Drilled & Slotted Brake Rotors Cross-drilled rotors are a quick and simple way to improve initial pad bite. With the additional leading edges at each hole, the pad is able to grab the rotor just a little bit harder when it’s time to stop NOW! Tests have shown (and drivers can feel) the immediate improvement. The holes also provide better cooling under hard use. Pad wear may be accelerated slightly (depending on driving technique), so only high quality brake pads should be considered.

Slotted rotors provide much of the increased pad bite that cross-drilled rotors do, but can handle the heat of more aggressive use. The slots act as a wiper, cleaning the pad face as they go by to reduce pad glazing, keeping the pads fresh for optimal performance. If taking the car often to track days or where very spirited driving is the norm, slotted rotors are the smart choice.

Cross-drilled and slotted rotors combine the best of both. Fewer holes mean longer pad life with little penalty in the way of initial pad bite. These are popular, aggressive-looking patterns that look great behind custom wheels.

Every SportStop® rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
You're currently viewing parts for your (F80) M3 2015+. Reset your chassis
For accurate results, specify your model below.
Stainless Brake Rotor Set Screw (34211161806) - Set Of 4

This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws. As everyone knows, the stock screws will seize in the holes over time. And the shallow recess on the head means the screw is easily stripped. These replacement rotor screws are stainless steel and won't corrode and seize in place.

This is a set of 4 stainless screws. Most BMW rotors take one screw but some M cars after 2001 will take two screws per rotor.

Turner Motorsport
Part #: 34211161806KT
Price: $9.96 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Front Brake Rotor Retaining Screw / Hold Down Bolts (Set of 4) - M8x12 Brake rotor retaining screw used for many BMW applications. M8x12.We recommend replacing the brake rotor hold down bolts each time the brake rotors are removed as they have a tendency to rust into place or to become stripped with multiple uses. This is for a set of 4 bolts.

Genuine BMW
Part #: 34111123072-4
Price: $4.20 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Stainless Brake Rotor Set Screw (34111123072) - Set Of 4

This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws. As everyone knows, the stock screws will seize in the holes over time. And the shallow recess on the head means the screw is easily stripped. These replacement rotor screws are stainless steel and won't corrode and seize in place.

This is a set of 4 stainless screws. Most BMW rotors take one screw but some M cars after 2001 will take two screws per rotor.

Turner Motorsport
Part #: 001359ecs01ax4KT
Price: $9.96 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity: