Home
Intake

BMW Intake Parts for BMW F80 M3 S55 3.0L

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

Mishimoto Performance Intercooler Heat Exchanger - F8X M2 M3 M4 S55 ...

CARB certified for sale in all 50 states

T#:637356

Part#: MMHE-F80-15

EO#: D-759-13

In Stock

$ 725.99 USD

Add to Wish List

Qty

$ 725.99 USD

Add to Wish List

Improve the cooling capacity for your 2015–2020 BMW M3 or M4 with the Mishimoto Performance Heat Exchanger. Air-to-water intercooling is a means of more efficient heat transfer from the charged air, but it now requires an additional heat exchanger mounted to the front of the vehicle in order to dissipate the transferred heat. The S55 powering the F8X generation of M’s packs quite a punch thanks to the A2W system. While the BMW engineers laid the foundation for dissipating heat from the intercooling system, we still saw some room to improve on their design. We started by eliminating any bits of plastic and promptly replaced the end tanks, including the inlet and outlet ports, with durable aluminum. We kept the dual-pass flow through the core for maximum cooling properties while expanding the core into the available space. Our new design features a 42mm thick core while extending the height by 150 mm, totaling in a 60% increase in core volume and a 180% increase in fin surface area. The end result of our improvements is a 10°F drop in global intercooling temperatures over the stock unit. Size isn’t the only thing that matters with this heat exchanger. Since the heat exchanger sits front and center in the M3 and M4’s cooling stack, it’s susceptible to damage from road debris. To keep your air-to-water system safe, our heat exchanger comes equipped with an optional steel mesh stone guard for an added layer of protection for the fins. We also incorporated a variable fin pitch for the lower 12 rows on the core in order to facilitate cooling to DCT-equipped M's. Finally, our 2015–2020 BMW F8X M3/M4 Performance Heat Exchanger includes the Mishimoto Lifetime Warranty for a worry-free install. Features: Direct fit for the 2015–2020 BMW M3, M4, and M2 Competition 10°F drop in global intercooler coolant temperatures over stock 60% increase in core volume 180% increase in external fin surface area Increases intercooler coolant capacity by 0.6 gallons Full aluminum, TIG-welded construction Dual-pass design for maximum cooling Variable fin-pitch design for improved airflow to DCT cooler Includes optional stone guard for maximum protection against road debris Mishimoto Lifetime Warranty Included: (1) Performance Heat Exchanger (1) Stone Guard (1) Magnetic Drain Plug Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Performance Charge Pipe Kit - F8X M2 M3 M4 S55

CARB certified for sale in all 50 states

T#:637358

Part#: MMICP-F80-15

EO#: D-759-13

Ships in 3 Business Days

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Keep the boost flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 Charge Pipe Kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. Our charge pipe kit also includes a pair of matte black silicone couplers for a secure and stock styled connection to the air-to-water intercooler. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a worry-free installation. Features: Direct fit for the 2015–2020 BMW M3, M4, and M2 Competition Full aluminum TIG-welded construction for maximum durability Unique cast midsection for perfect fitment between engine and air intake Includes bung for simple integration of methenol injection Designed for optimal airflow Includes matte black silicone couplers for a secure and stock-style connection to the intercooler Mishimoto Lifetime Warranty Included: (2) Charge Pipes (2) Silicone Couplers (4) Worm Gear Clamps Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82...

T#:5788180

Part#: BMS-F-S55HE

Ships on Aug 6, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

This direct bolt-in intercooler upgrade is a high-quality heavy-duty replacement heat exchanger that dramatically improves turbo/inlet air cooling by providing double the cooling surface area and over three times the fluid volume compared to the factory cooler. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Dramatically improves turbo/inlet air cooling Double the cooling surface area of the factory unit No modification install and removal Increases turbo efficiency in extended runs Made in the USA

Show More Show Less

Active Autowerke Cnc Aftercooler Cooling Kit - F8x S55

T#:5886968

Part#: 15-012

Ships in 4 Business Days

$ 2,849.99 USD

Add to Wish List

Qty

$ 2,849.99 USD

Add to Wish List

BMW's S55 motor is a modern marvel but one weak point, which Active identified is the entire cooling system for the intake which comprises the charge pipe, the aftercooler and the heat exchanger (or radiator). Finally there is a S55 aftercooler kit upgrade that is good enough to carry the Active Autowerke brand. Years of success in developing cars for motorsport has allowed Active to leverage its expertise to the top-mount charge air cooler on the F80 M3, F82 M4 and F87 M2 Competition. This aftercooler was made for the S55 and crafted using only high-grade aluminum to outperform the factory aftercooler in all situations from everyday driving to the toughest racing. The factory cooler was built to support a specific power target and environment. Many of you have increased the performance of the S55 which quickly overwhelms the stock cooler leading to heat soak and higher intake air temperatures which triggers the ECU to downgrade the performance until cooler air returns. Active's focus was not on a mass-market aesthetic add-on but a properly engineered improvement over the existing hardware. Active uses a tube-and-fin core designed specifically for the S55 and included turbulators to maximize the cooling efficiency in as small a package as possible. The end tanks are billet machined aluminum, not cast, folded, or bonded and ensure even distribution of the water throughout the internal aftercooler cores. High precision fittings, CNC machining, and TIG welding throughout ensures the highest quality construction to prevent pressure loss, and the lowest weight, in a bolt-on replacement. But Active also didn’t leave the aesthetics by the wayside as we dip the visible top of the aftercooler in a carbon fiber coating giving your installed cooling system a decidedly top market look to match the improved cooling performance. The Active silicone charge pipes for the F80 M3, F82/F83 M4 and the F87 M2 Competition improve the flow over the stock, compressed plastic pipes. The Active Silicone Charge Pipes allow you to maximize power on your F8X by securing all the boost that your S55 is making. These pipes replace the hot-side pipes leaving the turbos and into the top-mount aftercooler. The stock S55 charge pipes are notorious for developing hairline fractures at their plastic seams. These fractures or cracks are unnoticeable to the naked eye, but under boost pressure they open up leaking the desired charged air into the engine bay, and consequently can rob your S55 of it's full power potential. In addition, these leaks can trigger your S55's turbochargers to work harder to hit and maintain target boost pressure, potentially wearing them out sooner. Active uses silicone in this area because it will not contribute to heat soak and it's easier to mold for the correct clearances. Active uses a 5-layer silicone hose with all needed adapters and stainless hose clamps included. It fits perfectly with our CNC’d top-mount cooler.

Show More Show Less

Eventuri BMW F8X M3 / M4 Black Carbon Intake System - V2

T#:46719178

Part#: EVE-F8XMV2-CF-IN

Ships in 2 Business Days

$ 2,695.00 USD

Add to Wish List

Qty

$ 2,695.00 USD

Add to Wish List

3 Gallon F3x/F8x Stealth Tank

T#:558169

Part#: 3G-STMT-F3XF8X

Ships on Aug 6, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

Neatly hides away in the trunk cavity below the deck lid. The Water/Methanol Injection (WMI) pump mounts directly to the bottom of the tank allowing for a quick, clean, and completely stealthy installation. The bottom of the tank includes a sump and baffle, allowing for consistent performance even as the tank drains. Optional upgraded blue billet water/methanol injection (WMI) with 1-way check valve (ES4714530) Features & Benefits Pump mounts directly to the tank (pump sold separately) Works with all DDP 5800 pumps Super low profile design hides under the deck in the existing trunk cavity Available in clear for visually checking fluid levels Includes 2-way vented black plastic cap Threaded mounting points in the feet of the tank Includes a compression pump feed fitting Made in the USA Tank dimensions: L 26.75" x W 9.75" X H 7.5"

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW F80 M3 S55 3.0L

Sub-Categories

Mishimoto Performance Intercooler Heat Exchanger - F8X M2 M3 M4 S55 ...

Mishimoto Performance Charge Pipe Kit - F8X M2 M3 M4 S55

Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82...

Active Autowerke Cnc Aftercooler Cooling Kit - F8x S55

Eventuri BMW F8X M3 / M4 Black Carbon Intake System - V2

3 Gallon F3x/F8x Stealth Tank

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results