BMW Control Arm Replacements & Upgrades for BMW F80 M3 S55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:
Turner Monoball Thrust Arm Bearing Set - F8x M2/M3/M4
Turner Monoball Thrust Arm Bearing Set - F8x M2/M3/M4
Turner Motorsport - Corporate Logo
T#:397172
Part#: 023671TMS01
In Stock
Sale - Save 20% $ 464.99

This product was last offered at the strikethrough price on
06-13-2026

$ 371.99 USD
Free Shipping
Add to Wish List
Sale - Save 20%
$ 464.99

This product was last offered at the strikethrough price on
06-13-2026

$ 371.99 USD
Free Shipping
Add to Wish List
BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.
Show More Show Less
Turner Motorsport Thrust Arm Monoball Upgrade - Pre-installed Arms - F8x M2/M3/M4
Turner Motorsport Thrust Arm Monoball Upgrade - Pre-installed Arms - ...
Turner Motorsport - Corporate Logo
T#:401100
Part#: 023671TMS01-02
In Stock
Sale - Save 5% $ 840.99

This product was last offered at the strikethrough price on
06-14-2026

$ 798.94 USD
Free Shipping
Add to Wish List
Sale - Save 5%
$ 840.99

This product was last offered at the strikethrough price on
06-14-2026

$ 798.94 USD
Free Shipping
Add to Wish List
BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.
Show More Show Less
Turner Performance Adjustable Front Lower Control Arms - F87 M2, F80 M3, F82/83 M4
Turner Performance Adjustable Front Lower Control Arms - F87 M2, F80 ...
Turner Motorsport - Corporate Logo
T#:588022
Part#: 025990TMS03
In Stock
Sale - Save 3% $ 937.99

This product was last offered at the strikethrough price on
06-14-2026

$ 909.85 USD
Free Shipping
Add to Wish List
Sale - Save 3%
$ 937.99

This product was last offered at the strikethrough price on
06-14-2026

$ 909.85 USD
Free Shipping
Add to Wish List
Looking for upgraded lower control arms that don't limit adjustment capabilities like the OE control arms? These Turner Performance Lower Control Arms may be exactly what you need! These CNC'd billet aluminum control arms allow you to adjust roll center, camber, and track width easily and lock in your adjustments securely. The construction of these control arms allows for significant weight savings, reducing unsprung weight, while maintaining high levels of strength that is up to track use and abuse. Instead of using traditional jam nuts, these Turner Control Arms utilize a pinch bolt and rotating clamp design that allows high clamping forces to lock in track width and camper specifications without making it difficult to keep bearings properly aligned. Stainless steel spacers are included to enable roll center correction for lowered vehicles. To further improve control arm operation over the OE design, these control arms use FK rod ends and high misalignment solid spherical bushings to get rid of binding and flex. Features: Lightweight Aluminum, Titanium, Chromoly and Stainless Steel construction Correct ball joint angle for full articulation Clamp design allows for easy access to lock down your alignment settings Low friction 3-piece Teflon lined FK spherical bushings and Heim joints/rod ends Multiple size stainless steel roll center spacers for precise adjustment
Show More Show Less
Turner Monoball Rear Upper Control Arm Bushings - F8x M2, M2 Comp, M3, M4
Turner Monoball Rear Upper Control Arm Bushings - F8x M2, M2 Comp, M3...
Turner Motorsport - Corporate Logo
T#:2104260
Part#: 006261LA01
In Stock
Sale - Save 10% $ 354.99

This product was last offered at the strikethrough price on
06-14-2026

$ 319.49 USD
Free Shipping
Add to Wish List
Sale - Save 10%
$ 354.99

This product was last offered at the strikethrough price on
06-14-2026

$ 319.49 USD
Free Shipping
Add to Wish List
BMW’s are known to have failure prone rear control arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the rear wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer F80, F82, F83, and F87 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered. We offer these control arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms. Features: Bearing housing Precision CNC machined from 6061-T6 blue anodized aluminum Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands. CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. Bearing OEM BMW sealed and greased ball joint for exceptional durability and service life. Performance Nearly instantaneous, crisp steering and braking response. Maintenance free, long lasting performance. Improved road feel without undesirable NVH.
Show More Show Less
Delphi Front Lower Control Arm - Left - BMW F87 M2, F80 M3, F82/F83 M4
Delphi Front Lower Control Arm - Left - BMW F87 M2, F80 M3, F82/F83 M...
Delphi - Corporate Logo
T#:597001
Part#: 31122284529
In Stock
$ 193.99

This product was last offered at the strikethrough price on
05-07-2026

$ 187.99 USD
Free Shipping
Add to Wish List
$ 187.99 USD
Free Shipping
Add to Wish List
This is the left front lower control arm (also called a wishbone by BMW) for the F80 M3, F82 M4, and F83 M4. This can also be used as an upgrade on the F22 2-series and F3X 3/4-series. The M3/M4 control arm features a sealed inner and outer ball joints that are superior to elastometer rubber. The ball joints on the M3/M4 wishbone give a more precise feel and allow the control arm to move freely without resistance and with minimal deflection. When used on the F22/F30/F32 3/4-series they all 0.5 more degree of negative camber by pushing the bottom of the wheel out. And these are a little bit lighter than the stock F22/F3X control arms. This is an ideal upgrade for track and autocross cars that need more negative front camber.
Show More Show Less
F80 M3, F82 M4 Front Left Wishbone/Control Arm
F80 M3, F82 M4 Front Left Wishbone/Control Arm
Genuine BMW - Corporate Logo
T#:198734
Part#: 31122284529
Ships in 3 Business Days
8% off MSRP $ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 292.99 USD
Free Shipping
Add to Wish List
8% off MSRP
$ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 292.99 USD
Free Shipping
Add to Wish List
This is the left front lower control arm (also called a wishbone by BMW) for the F80 M3, F82 M4, and F83 M4. This can also be used as an upgrade on the F22 2-series and F3X 3/4-series. The M3/M4 control arm features a sealed inner and outer ball joints that are superior to elastometer rubber. The ball joints on the M3/M4 wishbone give a more precise feel and allow the control arm to move freely without resistance and with minimal deflection. When used on the F22/F30/F32 3/4-series they all 0.5 more degree of negative camber by pushing the bottom of the wheel out. And these are a little bit lighter than the stock F22/F3X control arms. This is a an ideal upgrade for track and autocross cars that need more negative front camber.
Show More Show Less
Delphi Front Lower Control Arm - Right - BMW F87 M2, F80 M3, F82/F83 M4
Delphi Front Lower Control Arm - Right - BMW F87 M2, F80 M3, F82/F83 ...
Delphi - Corporate Logo
T#:597000
Part#: 31122284530
In Stock
$ 193.99

This product was last offered at the strikethrough price on
05-07-2026

$ 187.99 USD
Free Shipping
Add to Wish List
$ 187.99 USD
Free Shipping
Add to Wish List
This is the right front lower control arm (also called a wishbone by BMW) for the F80 M3, F82 M4, and F83 M4. This can also be used as an upgrade on the F22 2-series and F3X 3/4-series. The M3/M4 control arm features a sealed inner and outer ball joints that are superior to elastometer rubber. The ball joints on the M3/M4 wishbone give a more precise feel and allow the control arm to move freely without resistance and with minimal deflection. When used on the F22/F30/F32 3/4-series they all 0.5 more degree of negative camber by pushing the bottom of the wheel out. And these are a little bit lighter than the stock F22/F3X control arms. This is an ideal upgrade for track and autocross cars that need more negative front camber.
Show More Show Less
Turner Motorsport Performance Rear Upper Control Arms - F8X M2 M3 M4
Turner Motorsport Performance Rear Upper Control Arms - F8X M2 M3 M4 ...
Turner Motorsport - Corporate Logo
T#:637367
Part#: 025990TMS012
In Stock
$ 1,062.99

This product was last offered at the strikethrough price on
05-03-2026

$ 899.99 USD
Free Shipping
Add to Wish List
$ 899.99 USD
Free Shipping
Add to Wish List
Eliminate sloppy handling with Turner's performance control arms!
Turner Adjustable Toe Arms w/ Eccentric Lockout Plates - F80, F82, G80, G82, G87
Turner Adjustable Toe Arms w/ Eccentric Lockout Plates - F80, F82, G8...
Turner Motorsport - Corporate Logo
T#:587754
Part#: 23672TMS03
In Stock
Starting at $ 432.99 USD
Free Shipping
Add to Wish List
Starting at $ 432.99 USD
Free Shipping
Add to Wish List
Eliminates any unwanted movement in the rear end associated with the the cumbersome factory eccentric toe adjustment point, opening up a wider range of adjustment for your alignment needs!
F80 M3, F82 M4 Front Right Wishbone/Control Arm
F80 M3, F82 M4 Front Right Wishbone/Control Arm
Genuine BMW - Corporate Logo
T#:198735
Part#: 31122284530
Ships in 3 Business Days
8% off MSRP $ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 292.99 USD
Free Shipping
Add to Wish List
8% off MSRP
$ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 292.99 USD
Free Shipping
Add to Wish List
This is the right front lower control arm (also called a wishbone by BMW) for the F80 M3, F82 M4, and F83 M4. This can also be used as an upgrade on the F22 2-series and F3X 3/4-series. The M3/M4 control arm features a sealed inner and outer ball joints that are superior to elastometer rubber. The ball joints on the M3/M4 wishbone give a more precise feel and allow the control arm to move freely without resistance and with minimal deflection. When used on the F22/F30/F32 3/4-series they all 0.5 more degree of negative camber by pushing the bottom of the wheel out. And these are a little bit lighter than the stock F22/F3X control arms. This is a an ideal upgrade for track and autocross cars that need more negative front camber.
Show More Show Less
Performance Adjustable Rear Traction Links - BMW F8X M2 M3 M4, G8X M3 M4 Base & Competition
Performance Adjustable Rear Traction Links - BMW F8X M2 M3 M4, G8X M3...
Turner Motorsport - Corporate Logo
T#:5471050
Part#: 00501TMS08
In Stock
$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
The stock Genuine BMW rear trailing arms (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Traction Links increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches. Thanks to their adjustable design, these allow fine tuning of rear bumpsteer and anti-squat characteristics. These arms are designed for use in high-performance street and race vehicles. These traction links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA
Show More Show Less
Performance Adjustable Rear Toe Links - BMW F8X M2 M3 M4, G8X M3 M4 Base & Competition
Performance Adjustable Rear Toe Links - BMW F8X M2 M3 M4, G8X M3 M4 B...
Turner Motorsport - Corporate Logo
T#:5471051
Part#: 00501TMS09
In Stock
Sale - Save 5% $ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD
Free Shipping
Add to Wish List
Sale - Save 5%
$ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD
Free Shipping
Add to Wish List
The stock Genuine BMW rear toe links (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Toe Links increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments. Even small changes to ride height and camber will effect toe settings, and the wide range of adjustment allows you to maximize grip on a track car and extend tire life on a street car. The factory rear toe arms utilize an eccentric bolt and washer for adjustment and lack precision and range. These toe links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. Best if tightened to 73.7 ft. lbs. (100 N/M). DO NOT OVERTORQUE! ECS is not liable for any issues due to overtorque. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA
Show More Show Less
Genuine BMW Rear Lower Control Arm Balljoint - Outer - E82/E88 E9X F22/23 F3X F8X
Genuine BMW Rear Lower Control Arm Balljoint - Outer - E82/E88 E9X F2...
Genuine BMW - Corporate Logo
T#:21815
Part#: 33326792553
Ships in 3 Business Days
15% off MSRP $ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 81.99 USD
Free Shipping
Add to Wish List
15% off MSRP
$ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 81.99 USD
Free Shipping
Add to Wish List


Genuine BMW Ball Joint
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93,F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i12

Genuine BMW Right Side Thrust arm - F80 M3, F83 M4, F87 M2, F82 M4
Genuine BMW Right Side Thrust arm - F80 M3, F83 M4, F87 M2, F82 M4 ...
Genuine BMW - Corporate Logo
T#:198737
Part#: 31122284532
In Stock
22% off MSRP $ 319.52

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.77 USD
Free Shipping
Add to Wish List
22% off MSRP
$ 319.52

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.77 USD
Free Shipping
Add to Wish List
Genuine BMW Right Tension Strut With Rubber Mounting
Genuine BMW Camber Control Arm - F80 M3,F82 M4,F83
Genuine BMW Camber Control Arm - F80 M3,F82 M4,F83
Genuine BMW - Corporate Logo
T#:195060
Part#: 33322284533
Ships in 3 Business Days
8% off MSRP $ 329.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 301.99 USD
Free Shipping
Add to Wish List
8% off MSRP
$ 329.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 301.99 USD
Free Shipping
Add to Wish List
Genuine BMW Camber Control Arm.
Genuine BMW Camber Adjustment Bushing - 33326770829 - F80 M3, F82 M4
Genuine BMW Camber Adjustment Bushing - 33326770829 - F80 M3, F82 M4 ...
Genuine BMW - Corporate Logo
T#:60348
Part#: 33326770829
Ships in 3 Business Days
14% off MSRP $ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 47.99 USD
Free Shipping on orders $49 and up
Add to Wish List
14% off MSRP
$ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 47.99 USD
Free Shipping on orders $49 and up
Add to Wish List

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


Genuine BMW Rubber Mount, Roll-Over Strut
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93,F80 M3,F82 M4,F83
 

 

Show More Show Less
Genuine BMW Rear Lower Control Arm - F80 M3, F82 M4, F87 M2
Genuine BMW Rear Lower Control Arm - F80 M3, F82 M4, F87 M2
Genuine BMW - Corporate Logo
T#:198755
Part#: 33322284534
Ships in 3 Business Days
9% off MSRP $ 333.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 304.99 USD
Free Shipping
Add to Wish List
9% off MSRP
$ 333.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 304.99 USD
Free Shipping
Add to Wish List
Genuine BMW Left Tension Strut With Rubber Mounting
Turner Motorsport Control Arm Monoball Upgrade Kit
Turner Motorsport Control Arm Monoball Upgrade Kit
Turner Motorsport - Corporate Logo
T#:2528148
Part#: 006261LA09
In Stock at Vendor
Sale - Save 3% $ 2,028.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,968.12 USD
Free Shipping
Add to Wish List
Sale - Save 3%
$ 2,028.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,968.12 USD
Free Shipping
Add to Wish List
BMW’s are known to have failure prone rear control arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the rear wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer F80, F82, F83, and F87 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered. We offer these control arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms. Features: Bearing housing Precision CNC machined from 6061-T6 blue anodized aluminum Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands. CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. Bearing OEM BMW sealed and greased ball joint for exceptional durability and service life. Performance Nearly instantaneous, crisp steering and braking response. Maintenance free, long lasting performance. Improved road feel without undesirable NVH.
Show More Show Less
Genuine BMW Left Side Thrust arm - F80 M3, F82 M4, F87 M2, F83 M4
Genuine BMW Left Side Thrust arm - F80 M3, F82 M4, F87 M2, F83 M4 ...
Genuine BMW - Corporate Logo
T#:198736
Part#: 31122284531
In Stock
8% off MSRP $ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 292.99 USD
Free Shipping
Add to Wish List
8% off MSRP
$ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 292.99 USD
Free Shipping
Add to Wish List
Genuine BMW Left Tension Strut With Rubber Mounting
Genuine BMW Rear Upper Control Arm - F80 M3, F82 M4, F87 M2
Genuine BMW Rear Upper Control Arm - F80 M3, F82 M4, F87 M2
Genuine BMW - Corporate Logo
T#:198757
Part#: 33322284777
Ships in 3 Business Days
9% off MSRP $ 333.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 304.99 USD
Free Shipping
Add to Wish List
9% off MSRP
$ 333.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 304.99 USD
Free Shipping
Add to Wish List
Genuine BMW Replacement Rear Upper Control Arm
Genuine BMW Rear Axle Self-locking Collar Nut 33326760668
Genuine BMW Rear Axle Self-locking Collar Nut 33326760668
Genuine BMW - Corporate Logo
T#:13492
Part#: 33326760668
In Stock
$ 2.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 2.99 USD
Free Shipping on orders $49 and up
Add to Wish List
GENUINE BMW SELF-LOCKING COLLAR NUT:339500
Right Side Thrust Arm
Right Side Thrust Arm
Delphi - Corporate Logo
T#:16674173
Part#: 31122284532
In Stock at Vendor
$ 186.99

This product was last offered at the strikethrough price on
07-20-2026

$ 182.25 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 182.25 USD
Free Shipping on orders $49 and up
Add to Wish List
Rod End Boot (14-18mm) - Priced Each
Rod End Boot (14-18mm) - Priced Each
Turner Motorsport - Corporate Logo
T#:599632
Part#: RERS3
In Stock
Sale - Save 43% $ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 43%
$ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.
Show More Show Less
Genuine BMW Control Arm Hex Screw With Collar - 33326762875
Genuine BMW Control Arm Hex Screw With Collar - 33326762875
Genuine BMW - Corporate Logo
T#:60317
Part#: 33326762875
In Stock
8% off MSRP $ 10.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.40 USD
Free Shipping on orders $49 and up
Add to Wish List
8% off MSRP
$ 10.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.40 USD
Free Shipping on orders $49 and up
Add to Wish List
Genuine BMW Control Arm Hex Screw With Collar - M14X1,5X82-10.9 This item fits the following BMW Chassis: E82,E90,E92,E93,F22,F30,F31,F32,F33,F34,F36,I12 i8
Left Side Thrust Arm
Left Side Thrust Arm
Delphi - Corporate Logo
T#:16674174
Part#: 31122284531
In Stock
$ 188.99

This product was last offered at the strikethrough price on
07-14-2026

$ 182.25 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 182.25 USD
Free Shipping on orders $49 and up
Add to Wish List
Genuine BMW Front Control Arm Refresh Kit - F80 M3, F82/83 M4, F87 M2
Genuine BMW Front Control Arm Refresh Kit - F80 M3, F82/83 M4, F87 M2...
Genuine BMW - Corporate Logo
T#:30463960
Part#: F80-OEM-FCARKT
Ships in 3 Business Days
$ 1,213.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 1,213.00 USD
Free Shipping on orders $49 and up
Add to Wish List

Upgrade your BMW’s front suspension with our high-quality Front Suspension Control Arm Kit, designed to restore stability and precision to your vehicle. Over time, worn control arms can lead to creaking, groaning, and instability, especially at highway speeds. Our comprehensive kit ensures a complete overhaul with all necessary components pre-assembled for easy installation.

Key Features:

Enhanced Stability: Say goodbye to wandering and instability on the road with new, durable control arms. Complete Solution: Our kit includes all four front control arms, two ball joints, and essential installation hardware. Premium Quality: Assembled by enthusiasts at ECS Tuning, ensuring top-notch performance and reliability. Ready for Installation: All related ball joints and bushings are pre-installed, saving you time and effort. Kit Includes:

4 Front Control Arms Installation Hardware Give your BMW the suspension upgrade it deserves. Enhance your driving experience with our Front Suspension Control Arm Kit and enjoy the confidence of driving a well-maintained vehicle. Order now and experience the difference in ride quality and stability.

Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping