Home
Suspension
Control Arm Replacements & Upgrades

BMW Control Arm Replacements & Upgrades for BMW F80 M3 S55 3.0L

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

Delphi Front Lower Control Arm - Left - BMW F87 M2, F80 M3, F82/F83 M...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:597001

Part#: 31122284529

In Stock

$ 193.99

This product was last offered at the strikethrough price on
05-07-2026

$ 187.99 USD

Add to Wish List

Qty

$ 187.99 USD

Add to Wish List

This is the left front lower control arm (also called a wishbone by BMW) for the F80 M3, F82 M4, and F83 M4. This can also be used as an upgrade on the F22 2-series and F3X 3/4-series. The M3/M4 control arm features a sealed inner and outer ball joints that are superior to elastometer rubber. The ball joints on the M3/M4 wishbone give a more precise feel and allow the control arm to move freely without resistance and with minimal deflection. When used on the F22/F30/F32 3/4-series they all 0.5 more degree of negative camber by pushing the bottom of the wheel out. And these are a little bit lighter than the stock F22/F3X control arms. This is an ideal upgrade for track and autocross cars that need more negative front camber.

Show More Show Less

Delphi Front Lower Control Arm - Right - BMW F87 M2, F80 M3, F82/F83 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:597000

Part#: 31122284530

Ships in 2 Business Days

$ 193.99

This product was last offered at the strikethrough price on
05-07-2026

$ 187.99 USD

Add to Wish List

Qty

$ 187.99 USD

Add to Wish List

This is the right front lower control arm (also called a wishbone by BMW) for the F80 M3, F82 M4, and F83 M4. This can also be used as an upgrade on the F22 2-series and F3X 3/4-series. The M3/M4 control arm features a sealed inner and outer ball joints that are superior to elastometer rubber. The ball joints on the M3/M4 wishbone give a more precise feel and allow the control arm to move freely without resistance and with minimal deflection. When used on the F22/F30/F32 3/4-series they all 0.5 more degree of negative camber by pushing the bottom of the wheel out. And these are a little bit lighter than the stock F22/F3X control arms. This is an ideal upgrade for track and autocross cars that need more negative front camber.

Show More Show Less

Turner Complete Performance Adjustable Suspension Upgrade Kit - F80 M...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1271582

Part#: F8XPERFSUSFR2KT

In Stock

Sale - Save 2% $ 3,512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 3,457.05 USD

Add to Wish List

Qty

Sale - Save 2%

$ 3,512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 3,457.05 USD

Add to Wish List

Having issues with bump steer or sway bar preload in your lowered car? Looking for wider range of suspension adjustability? Look no further! This comprehensive kit contains all of the parts used and recommended by Turner Motorsport to correct, upgrade, and fine tune your suspension to your liking! From roll-center correction to widened range of adjustment over factory eccentric bolts, the parts in this kit have got you covered. Make the most of your BMW by replacing the slop of rubber bushings with spherical bearings and eliminating the limited adjustability of the factory suspension geometry. This kit contains: Front: Lower Control Arms - Roll center, camber, track width, and headlight leveling adjustability Thrust Arms - Caster adjustment Tie Rod Ends - Bump steer, roll center, and tie rod binding correction Rear: Adjustable Toe Arms - Increased range of adjustment and low suspension deflection Upper Control Arms - Upgraded durability over weak OEM linkages Traction Arms - Adjustable length and reduced deflection

Show More Show Less

OE Front Control Arm Refresh Kit - F8X M2 M3 M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:30463959

Part#: F80-OE-FCARKT2

Ships in 3 Business Days

$ 1,016.99

This product was last offered at the strikethrough price on
05-07-2026

$ 1,003.99 USD

Add to Wish List

Qty

$ 1,003.99 USD

Add to Wish List

Upgrade your BMW’s front suspension with our high-quality Front Suspension Control Arm Kit, designed to restore stability and precision to your vehicle. Over time, worn control arms can lead to creaking, groaning, and instability, especially at highway speeds. Our comprehensive kit ensures a complete overhaul with all necessary components pre-assembled for easy installation.

Key Features:

Enhanced Stability: Say goodbye to wandering and instability on the road with new, durable control arms. Complete Solution: Our kit includes all four front control arms, two ball joints, and essential installation hardware. Premium Quality: Assembled by enthusiasts at ECS Tuning, ensuring top-notch performance and reliability. Ready for Installation: All related ball joints and bushings are pre-installed, saving you time and effort. Kit Includes:

4 Front Control Arms Installation Hardware Give your BMW the suspension upgrade it deserves. Enhance your driving experience with our Front Suspension Control Arm Kit and enjoy the confidence of driving a well-maintained vehicle. Order now and experience the difference in ride quality and stability.

Project Cars

SELECT YOUR BMW

BMW Control Arm Replacements & Upgrades for BMW F80 M3 S55 3.0L

Sub-Categories

Delphi Front Lower Control Arm - Left - BMW F87 M2, F80 M3, F82/F83 M...

Delphi Front Lower Control Arm - Right - BMW F87 M2, F80 M3, F82/F83 ...

Turner Complete Performance Adjustable Suspension Upgrade Kit - F80 M...

OE Front Control Arm Refresh Kit - F8X M2 M3 M4

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results