BMW F85 X5 M S63 4.4L

• 70MM, 80MM, OR 90MM OVERALL LENGTH
• OUR HIGHEST-GRADE PREMIUM WHEEL STUD
• DRY LUBE WITH BLACK M-PHOSPHATE COATING
• STUD FOR RACE/TRACK USE
• CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
• USE WITH 14x1.5 NUT
  
• For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.
  
  These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
  
  We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.
   

  FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:
  

• Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
• Heat-treated aircraft quality alloy steel
• Developed from over 20 years of top level NASCAR use
  
• These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).
  
  Sold per stud.
  Wheel nuts sold separately.

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

• Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
• Prevents damage to rocker panels or vehicle undercarriage
• Made from solid billet aluminum for durability
• Engraved Burger Motorsports logo for authenticity
• Honeycomb grip pattern for stability during use

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

• Precisely gaps spark plugs for enhanced engine performance and efficiency
• Speeds up the gapping process while ensuring accuracy and uniformity
• Available in two sizes (14mm and 12mm) for a wider range of compatibility
• Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
• Made in the USA for premium quality and durability

The Akrapovic Cat-back Titanium exhaust system for the BMW X5/X6 M is designed for drivers who demand more power and less weight. In addition to weight reduction and a power gain, one of the tasks of the Akrapovic team was also to make the sound of the X5/X6 M become music to ones ears. An optional wireless "dualmode" exhaust flap control allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, when the exhaust flap is opened the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car.

Power gains come in at 5.3 hp (at 5300 RPM) and 8.4 Nm (at 5250 RPM) with just the exhaust alone, and a total weight savings of 32.7 lbs! That is a 42% overall reduced difference in weight from stock.

Not for sale outside the US or Canada.

This item fits the following BMWs:
2015+ F85 BMW X5 M
2015+ F86 BMW X6 M

BMW Jack Pad Blue - Pair provides a professional-grade solution for safely lifting your BMW. Designed to fit perfectly at the factory jack points, this metal jack pad adapter ensures that you can lift your BMW, 2020 Supra, or MINI without risking damage to the jack points, rocker panels, or undercarriage.

• Safe Lifting: Designed for use at factory jack points to prevent damage.
• Durable Construction: Made from solid billet aluminum for long-lasting performance.
• Convenient Design: Easy to use with any floor jack, features a honeycomb grip pattern for stability.
• Non-Damaging: Does not touch or harm painted surfaces.
• USA Made: Crafted in the USA with precision and quality.

This jack pad adapter is a must-have tool for enthusiasts who want to lift their vehicles securely and correctly every time.

APR Valve Stem Caps - Set Of 4 - Silver are a stylish and functional upgrade for any vehicle. This set includes four high-quality aluminum valve stem caps, each engraved with the distinctive APR logo. These caps are designed to enhance the appearance of your wheels while providing durability and reliability.

• Stylish Appearance: Each cap features a sleek silver finish and an engraved APR logo, adding a touch of elegance to your vehicle.
• Durable Construction: Made from high-quality aluminum, these valve stem caps are built to withstand harsh conditions and resist corrosion.
• Easy Installation: Simple to install and compatible with most standard valve stems.
• Enhanced Wheel Aesthetics: Upgrades the look of your wheels with a subtle yet impactful design.
• Functional Protection: Helps protect valve stems from dirt and moisture, ensuring consistent performance.

This set of valve stem caps is an excellent choice for anyone looking to add a refined touch to their vehicle's wheels.

Dual clamp pipe connector joins exhaust pipes without welding. Split, compressible design clamps tightly around joined pipes for a leak-free fit. Includes hardware.

76.2mm (3.00 inch) diameter.

Protective Wheel Saver Socket - 17mm is designed to safeguard your valuable rims from damage during removal and installation. Featuring a synthetic polymer sleeve and insert, this socket ensures that your rims remain free from scratches or signs of wear while unscrewing and tightening lugs.

• Protects Wheels: The synthetic polymer sleeve and insert protect both factory and aftermarket wheels from scratches and damage.
• Versatile Use: Suitable for painted, clear-coated, chrome, factory, and other wheel finishes.
• Durable Construction: The six-point design and large contact surfaces help distribute stress and prevent damage.
• Wide Compatibility: Fits all 1/2" drive sockets, tools, and air tools, making it ideal for home use as well as rugged enough for professional shop use.
• Corrosion-Resistant: Made from heavy-duty materials that resist rust and corrosion, ensuring longevity.
• Essential Tool: A must-have for any serious enthusiast’s toolbox or for use at the shop when servicing your vehicle.
• Fits Various Vehicles: 17mm size is compatible with most BMW, MINI, Mercedes-Benz, Audi, VW, 2020+ Supra, and other vehicles with 17mm lug nuts.

This rugged and compact socket is perfect for maintaining your wheels and ensuring they stay in pristine condition.