CNC Billet License Plate Bracket

T#:27105150

Part#: RE.061

Ships in 8 Business Days

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.

Show More Show Less

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

For vehicles without Adaptive Cruise Control and with M Sport Package

T#:599469

Part#: LPM-BMC0133-N

In Stock

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

For vehicles with Adaptive Cruise Control and M Sport Package

T#:599470

Part#: LPM-BMC0136-N

In Stock

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less

Autoteknic Universal Carbon Fiber Splitter

T#:396026

Part#: UN-0001-CF

Ships in 7 Business Days

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

AutoTecknic Universal Carbon Fiber Splitter

The AutoTecknic universal carbon fiber splitter offers an upgraded front-end aesthetic for your vehicle. Crafted with 3K plain weave carbon fiber and a UV clear coat, these splitters boast a lustrous mirror shine finish. Compatible with various bumpers upon proper installation, they deliver:

Made from 3K plain weave carbon fiber with a UV clear coat finish
Compatibility with various bumpers with appropriate installation
Pre-installation drilling for mounting holes required
Vehicle-specific installation hardware not included
Provides a sporty appearance without excessive aggressiveness
Shields the bumper against speed bumps and road dips
Enhances the overall vehicle appearance while ensuring protection

Designed for those seeking a subtle yet sporty visual enhancement, these splitters safeguard your bumper while boosting your car's aesthetics. Recommended by numerous customers for both its visual appeal and functional benefits.

Package Contents: One set of AutoTecknic universal carbon fiber splitters.

Splitter Dimensions: 21" (Length) x 10" (Depth) x 5" (Width)

Show More Show Less

BMW Jack Pad Silver - Set Of 4

T#:26438196

Part#: BMWJACKPADSILR4

Ships in 1 Business Day

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

Autotecknic Stealth Black Dual-Slat Front Grille Set - F15 X5 / F85 X...

T#:21275591

Part#: ATK-BM-0174-DS-M

Ships in 7 Business Days

$ 130.00 USD

Add to Wish List

Qty

$ 130.00 USD

Add to Wish List

The stock grilles on a BMW give it a boring factory look. If you want a more aggressive, custom look, replace the stock grilles with a set of blackouts. An excellent way to add a small custom touch with a huge visual impact, these matte black kidney grilles easily snap into place of factory units. Make a big change in minutes right in your driveway.

Show More Show Less

Autotecknic Dry Carbon Fiber Bumper Trim - F85 X5M / F86 X6M ...

T#:21275580

Part#: ATK-BM-0098

Ships in 7 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

The F85 X5M and F86 X6M both have a very striking and attractive style. Although they do have some optional carbon additions, there is always room for more. The folks at AUTOTECKNIC have created this front bumper trim piece that replaces the gloss black trim below the kidney grilles. Give the front end of your ride this carbon upgrade is a no-brainer and made from high-quality dry carbon that will stand the test of time! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced. This AutoTecknic Dry Carbon Fiber Bumper Trim will match with all the different aerodynamic packages currently offered on the market. Additionally, it can be used to cover up holes and imperfections in the area on the factory bumper.

Show More Show Less

BMW Jack Pad With ECS Adapter Kit - E70, E71, F15, F16, F85, F86 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:56616362

Part#: ECS10721KT3

In Stock

$ 98.90 USD

Add to Wish List

Qty

$ 98.90 USD

Add to Wish List

This kit solves the problem for good. By pairing a full set of replacement chassis jack pads with an ECS billet jack pad adapter, you convert those delicate factory square sockets into a solid, standard round surface that works with virtually any floor jack in your garage. No more crushed plastic

Show More Show Less

BMW Jack Pad Silver - Price Each

T#:30330970

Part#: BMWJACKPADSLVR1

Ships in 2 Business Days

$ 19.00 USD

Add to Wish List

Qty

$ 19.00 USD

Add to Wish List

Carbon Fiber Dual-Slat Front Grille Set - F15 X5 / F85 X5M & F16 X6 /...

T#:21407058

Part#: ATK-BM-0174-DS-C

Ships in 7 Business Days

$ 350.00 USD

Add to Wish List

Qty

$ 350.00 USD

Add to Wish List

Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may not have been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. Replace your plastic kidney grilles with these dual-slat carbon fiber replacements for your X5/X6 and achieve a more aggressive and high-quality look! Package includes one pair of passenger and driver side direct OEM replacement front grilles.

Show More Show Less

Dry Carbon Roof Antenna Cover - 3K Twill Weave (2x2)

T#:40241339

Part#: ATK-BM-0335

Ships in 7 Business Days

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Get that predator look on your BMW with the AutoTecknic vacuumed dry carbon fiber 'shark fin' antenna cover. Made with AutoTecknic's signature vacuum forming technology, our products offer a perfect fit and finish every single time. All of our carbon fiber products are constructed with a consistent carbon weave pattern. Our production processes allow for an exceptional pre-preg carbon/resin ratio, creating high product stiffness that also leads to added strength and resistance. For a stunning finish, our products are coated with a high-gloss, UV-resistant clear coat that resists yellowing and does not chip or flake. We meticulously inspect all of our components prior to shipment and stand firmly by our products so that you can enjoy peace of mind with every genuine AutoTecknic carbon fiber product. Note: The antenna cover will only affect XM signals, all other bands will not be affected.

Show More Show Less

BMS Official 3D JB4 License Plate Frame

T#:41255921

Part#: BMSJB4LPF

In Stock

$ 10.00 USD

Add to Wish List

Qty

$ 10.00 USD

Add to Wish List

AutoTecknic Replacement Carbon Fiber Fender Trims - F85 X5M - Without...

T#:38655182

Part#: BM-0078-CF-3

Ships in 7 Business Days

$ 240.00 USD

Add to Wish List

Qty

$ 240.00 USD

Add to Wish List

Our blackout fender trims will help your vehicle stand out. Made of 100% ABS plastic, they are resistant to cracking and chipping. Developed and engineered with the OEM standard as the framework, all our fender trims are made with 100% non-recycled raw plastic that results in overall durable construction with strong clips and tabs for a secure and seamless fit. Each trim is individually finished with precision that yields a product of superior quality and fit to clean up your fenders.

Includes one pair of passenger and driver side direct replacement fender trims. Installation is simple and can be done in a matter of minutes in your own garage.

This product fits the following: X5
2015-2017 F85 X5M

Show More Show Less

Official JB4 Logo Car Emblem/Badge

T#:41255923

Part#: BMSJB4LOGO

Ships on Sep 22, 2026

$ 10.00 USD

Add to Wish List

Qty

$ 10.00 USD

Add to Wish List

Autotecknic Replacement Glazing Black Fender Trims - F15 X5 / F85 X5M...

T#:21407047

Part#: ATK-BM-0078-GB

Ships in 7 Business Days

$ 150.00 USD

Add to Wish List

Qty

$ 150.00 USD

Add to Wish List

Made for a seamless and secure fit, these Autotecknic glazing black fender grilles are perfect if you desire a more aggressive look with a subtle upgrade! Package includes one pair of passenger and driver side direct OEM replacement fender trim.

Show More Show Less

Carbon Fiber Replacement Mirror Covers - F85 X5M F86 X6M

T#:396029

Part#: BM-0144

Ships in 7 Business Days

$ 449.99 USD

Add to Wish List

Qty

$ 449.99 USD

Add to Wish List

We design our carbon fiber mirror caps to be a direct OEM replacement. All replacement parts are made with 100% non-recycled raw plastic to ensure that the clips and tabs will not break off easily. Includes one pair of passenger and driver side direct OEM replacement mirror covers.

Install involves removing factory mirror covers and replacing with new carbon fiber mirror caps.

This product fits the following BMWs:
F85 X5M
F86 X6M

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Exterior Trim, Body Parts, Aero and Styling for BMW F85 X5 M S63 4.4L

Sub-Categories

CNC Billet License Plate Bracket

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

Autoteknic Universal Carbon Fiber Splitter

AutoTecknic Universal Carbon Fiber Splitter

BMW Jack Pad Silver - Set Of 4

Active Autowerke Signature Trunk Emblem

Autotecknic Stealth Black Dual-Slat Front Grille Set - F15 X5 / F85 X...

Autotecknic Dry Carbon Fiber Bumper Trim - F85 X5M / F86 X6M ...

BMW Jack Pad With ECS Adapter Kit - E70, E71, F15, F16, F85, F86 ...

BMW Jack Pad Silver - Price Each

Carbon Fiber Dual-Slat Front Grille Set - F15 X5 / F85 X5M & F16 X6 /...

Dry Carbon Roof Antenna Cover - 3K Twill Weave (2x2)

BMS Official 3D JB4 License Plate Frame

AutoTecknic Replacement Carbon Fiber Fender Trims - F85 X5M - Without...

Official JB4 Logo Car Emblem/Badge

Autotecknic Replacement Glazing Black Fender Trims - F15 X5 / F85 X5M...

Carbon Fiber Replacement Mirror Covers - F85 X5M F86 X6M

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results