BMW Exterior Trim, Body Parts, Aero and Styling for BMW F85 X5 M S63 4.4L

Turner Motorsport Poly Tow Strap With Bolt - Red, Black - F10, F30, F...

T#:394707

Part#: 021461TMS

In Stock

Sale - Save 12% $ 144.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 127.21 USD

Add to Wish List

Sale - Save 12%

$ 144.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 127.21 USD

Add to Wish List

This Polyester tow strap is far and above the best tow strap available for the modern BMW chassis. We use a heavy-duty, chemical-resistant polyester strap webbed around a stainless steel stud. There is plenty of length available for tow hooks to grab onto without hitting your bumper and damaging paint or causing cracks. The precision-cut stud is fits all F- Chassis vehicles. We have further refined the shape and size of the bolt so that spoiler modifications are kept to a minimum. Note that on some models you may need to modify the bumper slightly for the best fit. Some models may also require removal of the bumper for easy installation. A tow strap is a better pickup point than a fixed steel ring, which will add weight and protrude past the bumper. Some racing series have banned the steel rings because they increase the likelihood of contact during close racing. Our straps are sold in bright red or black (red suggested for racing use as it makes it easy for tow truck operators and safety crews to spot). On some models, the strap may be tucked behind the bumper panel when not on track, which makes this perfect for dual-use track/street cars and full racecars alike. Priced per strap so order two for the front and rear. The 75mm bolt is commonly used with the M bumper designs and the 55mm bolt commonly used for the standard bumper due to the tow hook mounting thread distance behind the cover. The best practice is to measure the distance from the tow hook mounting threads to the outside of the bumper cover.

Show More Show Less

Matte Black Fender Trims - F15 X5 F85 X5M

T#:5175705

Part#: F15MBFNDRGRLKT

Ships in 8 Business Days

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Matte Black - Includes one pair of passenger and driver side direct replacement fender trims. Installation is simple and can be done in a matter of minutes in your own garage.

Gloss Black Fender Trims - F15 X5 F85 X5M

T#:5175704

Part#: F10GBFNDRGRLKT1

Back Ordered

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

Gloss Black - Includes one pair of passenger and driver side direct replacement fender trims. Installation is simple and can be done in a matter of minutes in your own garage.

Turner Motorsport License Plate Frame

T#:339016

Part#: TMS339016

In Stock

Sale - Save 50% $ 4.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2.50 USD

Add to Wish List

Sale - Save 50%

$ 4.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2.50 USD

Add to Wish List

Dress up those drab license plates with our TMS logoed license plate frames. Made of injection molded plastic, they do the trick without breaking the bank. Choose from either the standard style, or if you'd like to specifically let people know who takes care of your tuning needs, choose the "TUNED BY Turner Motorsport" edition. Sold individually. Be sure to get one for the front and rear of all your BMWs and MINIs. Select style and color options below.

Show More Show Less

Carbon Fiber Fender Trims - F15 X5 F85 X5M

T#:5175703

Part#: F15CFFNDRGRLKT

Ships in 8 Business Days

$ 239.99 USD

Add to Wish List

Qty

$ 239.99 USD

Add to Wish List

Carbon Fiber - Includes one pair of passenger and driver side direct replacement fender trims. Installation is simple and can be done in a matter of minutes in your own garage.

Turner Motorsport Racing Sticker Pack - Choose Your Color

T#:41492594

Part#: TMSSTICKERPK

In Stock

Sale - Save 25% $ 25.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 19.49 USD

Add to Wish List

Sale - Save 25%

$ 25.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 19.49 USD

Add to Wish List

We race our BMWs and we want to help you race your own! Sign up for our Race Credit Program and take advantage of in-store credit to help keep you and your BMW on track.

CNC Billet License Plate Bracket

T#:27105150

Part#: RE.061

In Stock

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.

Show More Show Less

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

For vehicles without Adaptive Cruise Control and with M Sport Package

T#:599469

Part#: LPM-BMC0133-N

Ships in 2 Business Days

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

For vehicles with Adaptive Cruise Control and M Sport Package

T#:599470

Part#: LPM-BMC0136-N

Ships in 3 Business Days

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less