BMW Fuel System Parts for BMW F85 X5 M S63 4.4L

Clear BMW chassis

Please ensure your correct model is selected

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

Sub-Categories

Sort By:

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness
For Vehicles With Motiv ReFlex Unit Currently Installed Only
Motiv Motorsports - Corporate Logo
T#:22723690
Part#: 101-0212
In Stock
$ 49.00 USD
Free Shipping on orders $49 and up
$ 49.00 USD
Free Shipping on orders $49 and up

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:

  • Effortless Installation: Plug-n-play design makes it easy to connect an ethanol content sensor without extensive modifications.
  • Real-Time Adjustments: Allows for automatic scaling of port injection based on real-time ethanol content, optimizing engine performance.
  • Seamless Integration: For CANbus integrated vehicles, it facilitates integration with the factory DME/ECU (pending feature release by tuning platforms).
  • No Manual Flashes Required: Removes the need for ground disconnection or map switching on your port injection controller.

Please note that the ethanol sensor is not included with this harness.

Show More Show Less
Bav Auto Tools - Corporate Logo
T#:580445
Part#: B8800140
In Stock
Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
Sale - Save 3%
$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.
Motiv Motorsports - Corporate Logo
T#:29500156
Part#: 200.1105
In Stock
$ 24.00 USD
Free Shipping on orders $49 and up
Quick disconnect adapters (QDA) are commonly used to adapt different components into vehicle fuel systems without requiring permanent modification. These adapters are machined from high-grade aluminum and anodized for corrosion resistance. QDAs incorporate Viton© o-rings which are compatible with most types of fuel, solvents and oils. QDAs maintain a reliable leak-proof seal under normal fuel injection system operating pressures. This particular QDA is sized perfectly to adapt right between the fuel line you were going to connect to your ethanol sensor. 3/8" (9.5mm) female quick disconnect 3/8" (9.5mm) male quick disconnect 1/8" Female pipe thread port * Viton© o-rings Crecent-lock system E-85 compatible Black anodized aluminum
Show More Show Less

Motiv Motorsports - Corporate Logo
T#:29201083
Part#: 900.1016
In Stock
$ 95.00 USD
Free Shipping on orders $49 and up
A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal
Show More Show Less

Bavarian Autosport - Corporate Logo
T#:639835
Part#: 13537537319
In Stock
Sale - Save 15% $ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.44 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.44 USD
Free Shipping on orders $49 and up
Located at the rear of the high-pressure fuel rail, this pressure sensor relays fuel pressure information to the vehicle's DME/ECS and is a common source of fault codes. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less
Spool Performance - Corporate Logo
T#:36913380
Part#: SP-FX-S63-FX170
Special Order: No Guaranteed ETA
$ 1,399.99 USD
Free Shipping on orders $49 and up

Motiv Motorsports - Corporate Logo
T#:29234314
Part#: 900.1014
Ships in 4 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
Required when installing a Motiv ReFlex Lite to your V8 powered BMW! Includes x8 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!
Precision Raceworks Fuel Line Check Valve - AN6 Male To AN6 Male ...
UNIVERSAL FITMENT - Intended for use with fuel lines featuring AN6 connectors, modifica...
PRECISION - Corporate Logo
T#:47679251
Part#: 201-0200
Ships in 9 Business Days
$ 52.99 USD
Free Shipping on orders $49 and up
$ 52.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks AN6 Male Check Valve is the ultimate solution to ensure optimal fuel system performance. Designed to prevent fuel from draining from your lines, this check valve is the perfect addition to your high-performance fuel system. Constructed from premium billet aluminum, featuring an anodized finish and Viton O-rings, this check valve is built to withstand the rigors of high-performance applications and E85. The piston-style design, with a spring to keep the piston in place, ensures that no fuel will drain from your lines, maintaining consistent fuel pressure and preventing unwanted fuel loss.
Show More Show Less

Spool Performance - Corporate Logo
T#:29500088
Part#: SP-INJ-S63IFX350
Special Order: No Guaranteed ETA
$ 2,399.00 USD
Free Shipping on orders $49 and up

Spool Performance introduces the IFX 350, an upgraded DI injector specifically designed for the Gen2 S63 platform. Engineered for enthusiasts who demand both power and OEM-level reliability, the IFX 350 injectors excel in maintaining smooth engine idle and low-load performance while providing unmatched power potential. Features:

Enhanced Flow Rate: Boosts fuel flow by 40% compared to stock injectors. Superior Fuel Delivery: Consistent performance at pressures up to 390 bar. Maintained OEM Functionality: Retains stock-like idle and low-load performance, ensuring full Bosch CVO correction capability. Backed by rigorous development and testing, the IFX 350 injectors are the ultimate solution for those aiming for four-digit horsepower figures while preserving engine reliability and smoothness.

Show More Show Less