Motiv Motorsports for BMW F85 X5 M S63 4.4L

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness
For Vehicles With Motiv ReFlex Unit Currently Installed Only
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:22723690
Part#: 101-0212
In Stock
$ 49.00 USD
Free Shipping on orders $49 and up
$ 49.00 USD
Free Shipping on orders $49 and up

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:

  • Effortless Installation: Plug-n-play design makes it easy to connect an ethanol content sensor without extensive modifications.
  • Real-Time Adjustments: Allows for automatic scaling of port injection based on real-time ethanol content, optimizing engine performance.
  • Seamless Integration: For CANbus integrated vehicles, it facilitates integration with the factory DME/ECU (pending feature release by tuning platforms).
  • No Manual Flashes Required: Removes the need for ground disconnection or map switching on your port injection controller.

Please note that the ethanol sensor is not included with this harness.

Show More Show Less
ReFlex+ Install Harness - Flying Lead
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:29201083
Part#: 900.1016
In Stock
$ 95.00 USD
Free Shipping on orders $49 and up
A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal
Show More Show Less
3/8" Quick Disconnect Adapter With 1/8" NPT Port
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:29500156
Part#: 200.1105
In Stock
$ 24.00 USD
Free Shipping on orders $49 and up
Quick disconnect adapters (QDA) are commonly used to adapt different components into vehicle fuel systems without requiring permanent modification. These adapters are machined from high-grade aluminum and anodized for corrosion resistance. QDAs incorporate Viton© o-rings which are compatible with most types of fuel, solvents and oils. QDAs maintain a reliable leak-proof seal under normal fuel injection system operating pressures. This particular QDA is sized perfectly to adapt right between the fuel line you were going to connect to your ethanol sensor. 3/8" (9.5mm) female quick disconnect 3/8" (9.5mm) male quick disconnect 1/8" Female pipe thread port * Viton© o-rings Crecent-lock system E-85 compatible Black anodized aluminum
Show More Show Less

Motiv ReFlex+ Control Unit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:29101684
Part#: 900.1001
In Stock
$ 729.00 USD
Free Shipping on orders $49 and up
The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.
Show More Show Less

ReFlex+ Install Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:29267513
Part#: 400.1001
In Stock
$ 15.00 USD
Free Shipping on orders $49 and up
ReFlex Lite: Advanced Sequential Injector Controller - V8
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:29234300
Part#: 910.1012
Ships in 5 Business Days
$ 499.00 USD
Free Shipping on orders $49 and up
The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for v-8 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.
Show More Show Less

ReFlex Lite Injector Harness - V8
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:29234314
Part#: 900.1014
Ships in 5 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
Required when installing a Motiv ReFlex Lite to your V8 powered BMW! Includes x8 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!