BMW F86 X6 M S63 4.4L

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

CNC Billet License Plate Bracket
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Rogue Engineering - Corporate Logo
T#:27105150
Part#: RE.061
In Stock
$ 119.00 USD
Free Shipping
$ 119.00 USD
Free Shipping
You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.
Show More Show Less
Tire Valve For TPMS Systems
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Autel - Corporate Logo
T#:641919
Part#: AUL1SENSOR
In Stock
Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
Sale - Save 29%
$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use
Autel Universal Rubber TPMS Sensor - Set Of Four
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Autel - Corporate Logo
T#:3529121
Part#: AUL1SENSORKT
In Stock
$ 243.99 USD
Free Shipping
$ 243.99 USD
Free Shipping

Active Autowerke Signature Trunk Emblem
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:590914
Part#: AASIGNATUREPLAQU
Ships in 3 Business Days
4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
4% off MSRP
$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!
Show More Show Less

Autel Autolink AL329
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Autel - Corporate Logo
T#:2914116
Part#: AL329
Ships in 1 Business Day
$ 49.99 USD
Free Shipping on orders $49 and up
OBDII Code Reader
AutoLink AL529HD
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Autel - Corporate Logo
T#:2914129
Part#: AL529HD
Ships in 6 Business Days
$ 264.99 USD
Free Shipping on orders $49 and up
Autel’s latest member of its code reader family of tools, the AL529HD can not only diagnose OBDII/EOBD-compatible vehicles but also heavy duty vehicles utilizing SAE-J1939 and SAE-J1708 protocols.

MaxiBAS BT506
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Autel - Corporate Logo
T#:2914145
Part#: BT506
Ships in 6 Business Days
$ 402.99 USD
Free Shipping
$ 402.99 USD
Free Shipping
The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b
Show More Show Less
Maxi TPMS Kit With Sensors
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Autel - Corporate Logo
T#:5663676
Part#: AULTS508K1
Ships in 6 Business Days
$ 739.99 USD
Free Shipping
$ 739.99 USD
Free Shipping
Pinpoint and replace bad TPMS Sensors

Autel MaxiTPMS TS508WFK-1 TPMS Diagnostic Tool
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Autel - Corporate Logo
T#:40782369
Part#: AUL-TS508WFK-1
Ships in 6 Business Days
$ 419.99 USD
Free Shipping on orders $49 and up
The TS508WFK-1 is a TPMS service tool that features Quick and Advance modes of TPMS service and a TPMS status screen. It can read/activate/relearn all known sensors, has 4 methods of MX-Sensor programming, and performs placard value resets on supported vehicles. This scanner displays on-tool MX-Sensor relearn procedures including OBDII and can do key fob signal tests. The TS508WFK-1 includes an OBDII cable, a 1-year tool warranty, and free lifetime software updates are available with purchase.
Show More Show Less

MaxiSys Ultra
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Autel - Corporate Logo
T#:2914136
Part#: MSULTRA
Ships in 6 Business Days
$ 12,306.99 USD
Free Shipping on orders $49 and up
The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence.
Active Autowerke S63 N63 A-Flow Catted Downpipes
For 2014+ model years only
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For 2014+ model years only
Active Autowerke - Corporate Logo
T#:51075079
Part#: 11-041A
Ships in 3 Business Days
New Item
$ 2,279.00 USD
Free Shipping
$ 2,279.00 USD
Free Shipping
For the BMW owner seeking increased performance without the drawbacks of a "catless" system, the Active Autowerke Aflow Catted Downpipes offer the perfect solution. These downpipes feature high-flow metallic catalytic converters that are specifically designed to maintain exhaust efficiency while preventing the dreaded Check Engine Light (CEL). Unlike track-only pipes that can produce raw fuel odors and cabin drone, the Aflow series maintains a sophisticated, refined exhaust note suitable for a luxury daily driver. Each set is custom-made in-house to ensure an exact bolt-on fit, providing a reliable solution that satisfies both the driver’s demand for power and the vehicle’s onboard diagnostic requirements. Key Features: No CEL Guarantee: Advanced Aflow catalyst technology prevents catalytic efficiency dashboard warnings. Refined Exhaust Note: Provides an aggressive V8 growl while maintaining cabin comfort for daily use. Bolt-On Installation: No cutting or welding required; replaces the bulky factory units directly. Thermal Resilience: Built to withstand the high temperatures generated by the S63 and N63 twin-turbo engines. Safe for Occupants: Reduces harmful emissions and raw exhaust odors compared to catless alternatives. Specifications: Primary Material: Brushed 304 Stainless Steel Fitting: Direct OEM Replacement (Bolt-on) Manufacturing Location: Hand-made in Miami, FL Weight Reduction: Lighter than the heavy, ceramic-core factory catalytic converters Surface Finish: Natural Stainless Lead Time: Custom made-to-order (Approx. 2 weeks)
Show More Show Less
Maxivideo MV400
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Autel - Corporate Logo
T#:2914140
Part#: MV400-55
Ships in 6 Business Days
$ 405.99 USD
Free Shipping on orders $49 and up
This premier Autel MaxiVideo MV400 digital videoscope is an ideal tool for examining difficult- to- reach areas normally hidden from sight.


Active Autowerke GESI Catted Downpipes - S63 N63
For 2014+ model years only
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:397488
Part#: 11-041
Ships in 3 Business Days
5% off MSRP $ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD
Free Shipping
5% off MSRP
$ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD
Free Shipping
Active Autowerke is proud to bring you our hand made Signature S63/N63 Downpipes for the twin-turbo V8 BMW X5M, X6M, 550i, 650i, X5, X6 models. This variant includes a pair of 4.5" ultra high flow GESI catalytic converter that will NOT produce a CEL!
Show More Show Less