BMW Suspension Parts for BMW F87 M2 N55 3.0L

BC Racing BR Series Coilover Suspension Kit - F87 M2

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:555814

Part#: I-75-BR

Back Ordered

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Show More Show Less

BC Racing BR Series Extreme Low Coilovers - F87 M2

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:568064

Part#: I-75E-BR

Ships on Aug 31, 2026

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions

Show More Show Less

Powerflex Rear Diff Rear Mounting Bushing - F8X M2,M3,M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:554716

Part#: PFR5-4026

In Stock

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

Show More Show Less

Powerflex Dual Mount Diff Bracket - BMW F8X M2/M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14023858

Part#: PFR5-4030

In Stock

$ 309.99 USD

Add to Wish List

Qty

$ 309.99 USD

Add to Wish List

NOTE: We suggest replacing 3 of BMW # 31126760203 during installation Kit comes supplied with M14 mounting bolt, thread locker, and a Powerflex keyring. With the newer F8x M2/M3/M4's making big power and having superb chassis straight from the showroom, it's no wonder they're often found at the most serious of track-days or at tuning shops around the globe. Unfortunately, the power that makes these cars so fun to drive eventually has an impact on the vehicles' suspension components- most notably the rear differential bushings. Despite having alloted for two mounting bushings on the factory tubular subframe, BMW opts to use only a single offset bushing in the rear to mount the diff bracket to the subframe. This essentially creates a pivot point for the diff under torque loading, especially if the 4x front diff bushes are worn out and softer than they once were. With hard launches and sudden and frequent on-off throttle changes, the single rear OE rubber bushing is subject to extreme torsional and directional forces, resulting in rapid degradation with failure often seen at around the 30,000-40,000 mile mark, and an unsettled and potentially clunky rear-end. The PFR5-4030 Dual Mount Diff Bracket is made from our in-house CNC machined 6082 High-Tensile Aluminum, and is designed to utilize the secondary mounting position on the OE subframe. With the addition of a second bushing, this prevents the diff from twisting under load, providing benefits such as: Reduced drivetrain movement Improved throttle response A more controlled and consistent chassis response to acceleration/deceleration Improved tire-to-road power transfer due to reduced wheel hop Reduced strain on bushings The corrosion-resistant, satin black, anodized aluminum bracket is optimized for high stress and deflection while withstanding high torque loads, but serves the same purpose in road-use and track-use cars with either a single OE bushing or dual aftermarket bushings. Although the bracket can be fitted without the need to remove the subframe from the vehicle completely, we would strongly recommend combining Powerflex products by using our already hugely popular 80A durometer PFR5-4026 Rear Diff Rear Mounting Bushings for both rear mounting positions alongside our PFR5-4025 Rear Diff Front Mounting Bushings in the front for the ultimate in differential control and a lasting street or track solution.

Show More Show Less

BC Racing Rear Damping Adjustment Extenders - BR Type

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:555864

Part#: DMP-EXT

Back Ordered

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.

Show More Show Less

Powerflex Rear Diff Front Mounting Bushing - F8X M2,M3,M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:554720

Part#: PFR5-4025X4

In Stock

$ 346.99 USD

Add to Wish List

Qty

$ 346.99 USD

Add to Wish List

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

Show More Show Less

BMW F8X & G8X M2 / M3 / M4 Powerflex Rear Diff Rear Mounting Bushing ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:554715

Part#: PFR5-4026B

In Stock

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

Show More Show Less

Powerflex Rear Diff Front Mounting Bushing - F8X M2,M3,M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:554719

Part#: PFR5-4025BX4

In Stock

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Show More Show Less

BMW F8X - Powerflex Radius Arm To Chassis Bushings - Caster Adjustabl...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21637213

Part#: PFF5-4001G

Ships in 1 Business Day

$ 279.99 USD

Add to Wish List

Qty

$ 279.99 USD

Add to Wish List

When you opt to enhance your BMW F80, F82, F83, or F87 with Radius Arm to Chassis Bushings, you unlock a multitude of advantages. These include: Enhanced Handling: Radius Arm to Chassis Bushings elevate your BMW's handling to a higher level, granting exceptional control, especially during demanding maneuvers and sharp corners. This translates to an improved sense of stability on the road. Reduced Vibration and Noise: These bushings excel at reducing vibrations and dampening noise, leading to a quieter and smoother driving experience. Your ride quality becomes more refined, enhancing overall comfort. Improved Steering Response: Bid farewell to unresponsive steering. Radius Arm to Chassis Bushings enhance your BMW's steering response, delivering precise and immediate control, akin to forging a direct connection with the road. Extended Component Lifespan: Opting for high-quality bushings extends the lifespan of various suspension components. They exhibit superior durability compared to stock bushings, which translates to fewer replacements and increased longevity. Enhanced Traction: Whether you're passionate about spirited driving or partake in track activities, these bushings provide superior traction. Your BMW maintains consistent contact with the road surface, allowing you to confidently explore your vehicle's performance limits. OE / OEM Cross Reference Numbers: 31122284531/ 31122284532 / 31122283579 Fits these BMW models: F80 - M3 F82 - M4 F87 - M2

Show More Show Less

Powerflex Silicone Grease

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:362715

Part#: PCG1

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

The Powerflex silicone grease is the only lubricant we suggest for long, squeak free operation. The lubricant contains silicone that resists heat and water and keeps a more constant viscosity to allow it to stay in the bushing as temperatures increase. The lubricant also does not lose it's lubrication properties over time like an anti-seize type lubricant. Each pack will lube 2 large bushings or 4 small.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - F87 M2

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598302

Part#: I-75-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW F87 M2 N55 3.0L

Sub-Categories

BC Racing BR Series Coilover Suspension Kit - F87 M2

BC Racing BR Series Extreme Low Coilovers - F87 M2

Powerflex Rear Diff Rear Mounting Bushing - F8X M2,M3,M4

Powerflex Dual Mount Diff Bracket - BMW F8X M2/M3/M4

BC Racing Rear Damping Adjustment Extenders - BR Type

Powerflex Rear Diff Front Mounting Bushing - F8X M2,M3,M4

BMW F8X & G8X M2 / M3 / M4 Powerflex Rear Diff Rear Mounting Bushing ...

Powerflex Rear Diff Front Mounting Bushing - F8X M2,M3,M4

BMW F8X - Powerflex Radius Arm To Chassis Bushings - Caster Adjustabl...

Powerflex Silicone Grease

BC Racing DS Series Coilover Suspension Kit - F87 M2

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results