BMW Suspension Parts for BMW F87 M2 N55 3.0L

Ohlins Road And Track DFV Coilovers - F80/F82 M3 M4, F87 M2

T#:593661

Part#: BMU MR41

In Stock

$ 3,668.99 USD

Add to Wish List

Qty

$ 3,668.99 USD

Add to Wish List

Ohlins Racing has a long history dating back to 1976 of providing premium motorcycle and automotive suspension systems to numerous racing teams, individual racers, and OE brands such as BMW Motorsport, Audi, Lamborghini. Pagani, Ducati and Kawasaki. Over time, thanks to extensive R&D, testing, and tuning, their products have evolved into some of the highest quality suspension systems in the world, providing years of flawless operation on both the street and the track. Ohlins' latest automotive suspension system, the DFV (Dual Flow Valve) Road and Track Coilover Kit, has bridged the gap between comfortable stock suspension and track focused coilover kits. These kits provide a ride that glides over typical bumps and dips in the road, all without the typical hard rattle and harsh feel of usual coilovers, and turn in tight and maintain tire grip and traction in corners significantly better than stock suspension ever could. This is all thanks to the spring rate chosen and Ohlins and their signature Dual Flow Valve. The DFV maintains comfort and agility by giving the same characteristics for both rebound and compression, allowing the wheel and tire to maintain constant contact with the road/track for maximum control. The Dual Flow Valve works by controlling shock fluid flow based on resistance and impact velocity. This is controlled in both compression and rebound, giving the quick shock operation that helps maintain traction. At low shaft travel speeds, oil flows mostly through the shaft jet bleed. At higher shaft speeds, oil flows mostly through the compression/rebound ports in the piston. At very high shaft speeds, or during sudden accelerations from potholes or large bumps in the road, oil can then escape through the ports in the DFV, absorbing a large amount of energy that would otherwise throw off the balance and control of the vehicle and keeping the tire planted firmly on the ground. With all three compression and rebound ports working together according to pressure and shaft speed, the result is the notorious premium suspension feel that only Ohlins can offer. In addition to managing the rebound and compression control, coilovers must also properly address heat changes in the shock oil. As the shock is pushed harder and longer, the oil quickly heats up due to friction and compression, and the oils flow characteristics change. The hotter the oil is, the easier it is for it to travel through ports and valves. To prevent this typical fade in control, Ohlins has implemented a temperature controlled needle bleed valve system that will expand as temperatures rise, slowly increasing restriction in the fluids flow through the valve gap. This produces a consistent dampening rate that maintains the vehicle's suspension characteristics lap after lap, turn after turn, no matter how hard you push your suspension's capabilities. Features: DFV (Dual Flow Valve) Adjustable ride-height Fully rebuildable Corrosion salt spray tested (ISO 9227) Includes hardware and installation instructions 2 year Limited Warranty Specs: Recommended Front Spring Rating: 515 lbs/in ( 9 k/mm) Recommended Rear Spring Rating: 1087 lbs/in ( 19 k/mm) *Now available are optional EDC Cancellation Modules that will prevent any lights or issues with suspension control systems. Turner Motorsport reccommends purchasing these in addition to the suspension kit to get the most out of your Ohlins suspension system. Ohlins Racing has a long history dating back to 1976 of providing premium motorcycle and automotive suspension systems to numerous racing teams, individual racers, and OE brands such as BMW Motorsport, Audi, Lamborghini. Pagani, Ducati and Kawasaki. Over time, thanks to extensive R&D, testing, and tuning, their products have evolved into some of the highest quality suspension systems in the world, providing years of flawless operation on both the street and the track. Ohlins' latest automotive suspension system, the DFV (Dual Flow Valve) Road and Track Coilover Kit, has bridged the gap between comfortable stock suspension and track focused coilover kits. These kits provide a ride that glides over typical bumps and dips in the road, all without the typical hard rattle and harsh feel of usual coilovers, and turn in tight and maintain tire grip and traction in corners significantly better than stock suspension ever could. This is all thanks to the spring rate chosen and Ohlins and their signature Dual Flow Valve. The DFV maintains comfort and agility by giving the same characteristics for both rebound and compression, allowing the wheel and tire to maintain constant contact with the road/track for maximum control. The Dual Flow Valve works by controlling shock fluid flow based on resistance and impact velocity. This is controlled in both compression and rebound, giving the quick shock operation that helps maintain traction. At low shaft travel speeds, oil flows mostly through the shaft jet bleed. At higher shaft speeds, oil flows mostly through the compression/rebound ports in the piston. At very high shaft speeds, or during sudden accelerations from potholes or large bumps in the road, oil can then escape through the ports in the DFV, absorbing a large amount of energy that would otherwise throw off the balance and control of the vehicle and keeping the tire planted firmly on the ground. With all three compression and rebound ports working together according to pressure and shaft speed, the result is the notorious premium suspension feel that only Ohlins can offer. In addition to managing the rebound and compression control, coilovers must also properly address heat changes in the shock oil. As the shock is pushed harder and longer, the oil quickly heats up due to friction and compression, and the oils flow characteristics change. The hotter the oil is, the easier it is for it to travel through ports and valves. To prevent this typical fade in control, Ohlins has implemented a temperature controlled needle bleed valve system that will expand as temperatures rise, slowly increasing restriction in the fluids flow through the valve gap. This produces a consistent dampening rate that maintains the vehicle's suspension characteristics lap after lap, turn after turn, no matter how hard you push your suspension's capabilities. Features: DFV (Dual Flow Valve) Adjustable ride-height Fully rebuildable Corrosion salt spray tested (ISO 9227) Includes hardware and installation instructions 2 year Limited Warranty Specs: Recommended Front Spring Rating: 515 lbs/in ( 9 k/mm) Recommended Rear Spring Rating: 1087 lbs/in ( 19 k/mm) *Now available are optional EDC Cancellation Modules that will prevent any lights or issues with suspension control systems. Turner Motorsport recommends purchasing these in addition to the suspension kit to get the most out of your Ohlins suspension system. Fits the following BMWs: 2013+ F80/82 BMW M3 M4 2016+ F87 BMW M2

Show More Show Less

F8X Ohlins X Turner Motorsport Street-Performance Coilover System ...

10X Entries Into Our F80 M3 Sweepstakes

T#:8294107

Part#: BMU MW40S1

Ships on Sep 16, 2026

$ 3,977.99 USD

Add to Wish List

Qty

$ 3,977.99 USD

Add to Wish List

Turner Motorsport has teamed up with Ohlins to bring the ultimate street coilover to the F8X community. Working alongside the engineers at Ohlins, we have developed a special recipe derived from the standard Ohlins DFV Road and Track kit. This Street-Performance system includes modified spring rates and valving for a more streetable coilover experience. If you are looking to enjoy your S55 car to the fullest, but don't want to forgo any ride quality, these are the perfect option.

Show More Show Less

Ohlins EDC Cancellation Kit - BMW M3 F80, M4 F82

T#:405066

Part#: 35020-02

In Stock at Vendor

$ 655.99 USD

Add to Wish List

Qty

$ 655.99 USD

Add to Wish List

The öhlins EDC Cancellation Kit for Road & Track deactivates control lamps and error reports when electronically adjustable OEM suspension is replaced by a mechanical system. The cancellation kit is just plugged into the original suspension controls. No further programming is needed.

Show More Show Less

F87 M2 Dinan Coil Over Spring Kit

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389433

Part#: D190-8701

Ships in 5 Business Days

11% off MSRP $ 1,799.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,599.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,799.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,599.99 USD

Add to Wish List

Dinan Adjustable Spring Sets feature stiffer springs and an innovative perch system that allows the ride height to be fine-tuned even with stock shocks. Dinan Performance springs are slightly lower but stiffer for better handling and less body roll yet still remain comfortable for normal use. They have carefully engineered the springs to work within the rates of the stock shocks, providing unmatched handling, looks, and ride quality. Adjustable spring perches give you the ability to keep your stock shocks (even EDC) but lower the ride height and set the perfect stance. This is hugely beneficial when using larger wheels and tires where a standard spring drop will not give you the look you desire. Dinan coil over springs include a threaded collar that fits over the stock strut body in the front and an adjustable perch in the rear. New progressive bump stops are also included to maintain the proper shock travel. This kit is great for fine tuning your ride height while retaining the factory EDC system.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 3 points towards your Dinan badge.

This item fits the following BMWs:
2015+ F87 BMW M2

Show More Show Less

AST 2016-2021 BMW M2 F87 / Competition LCI 5200 Series Coilovers ...

T#:38621397

Part#: RIV-B2104SD

Back Ordered

$ 6,714.00 USD

Add to Wish List

Qty

$ 6,714.00 USD

Add to Wish List

Turner Dual-Mount Differential Plate - With ECS Poly Diff Bushings - ...

10X Entries Into Our F80 M3 Sweepstakes

T#:589795

Part#: 026773TMS03KT

In Stock

Sale - Save 25% $ 1,019.99

This product was last offered at the strikethrough price on
06-14-2026

$ 764.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 1,019.99

This product was last offered at the strikethrough price on
06-14-2026

$ 764.99 USD

Add to Wish List

Allows for the addition of a second rear-position differential bushing, and allows for a more enhanced driving experience by removing unwanted movement. Engineered by Turner to withstand extreme driveline forces. Featuring ECS Poly Diff Bushing kit for maximum performance & handling.

Show More Show Less

Turner Motorsport Thrust Arm Monoball Upgrade - Pre-installed Arms - ...

10X Entries Into Our F80 M3 Sweepstakes

T#:401100

Part#: 023671TMS01-02

In Stock

Sale - Save 5% $ 840.99

This product was last offered at the strikethrough price on
06-14-2026

$ 798.94 USD

Add to Wish List

Qty

Sale - Save 5%

$ 840.99

This product was last offered at the strikethrough price on
06-14-2026

$ 798.94 USD

Add to Wish List

BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.

Show More Show Less

Turner Monoball Thrust Arm Bearing Set - F8x M2/M3/M4

10X Entries Into Our F80 M3 Sweepstakes

T#:397172

Part#: 023671TMS01

In Stock

Sale - Save 20% $ 464.99

This product was last offered at the strikethrough price on
06-13-2026

$ 371.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 464.99

This product was last offered at the strikethrough price on
06-13-2026

$ 371.99 USD

Add to Wish List

BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.

Show More Show Less

Turner Performance Adjustable Front Lower Control Arms - F87 M2, F80 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:588022

Part#: 025990TMS03

In Stock

Sale - Save 3% $ 937.99

This product was last offered at the strikethrough price on
06-14-2026

$ 909.85 USD

Add to Wish List

Qty

Sale - Save 3%

$ 937.99

This product was last offered at the strikethrough price on
06-14-2026

$ 909.85 USD

Add to Wish List

Looking for upgraded lower control arms that don't limit adjustment capabilities like the OE control arms? These Turner Performance Lower Control Arms may be exactly what you need! These CNC'd billet aluminum control arms allow you to adjust roll center, camber, and track width easily and lock in your adjustments securely. The construction of these control arms allows for significant weight savings, reducing unsprung weight, while maintaining high levels of strength that is up to track use and abuse. Instead of using traditional jam nuts, these Turner Control Arms utilize a pinch bolt and rotating clamp design that allows high clamping forces to lock in track width and camper specifications without making it difficult to keep bearings properly aligned. Stainless steel spacers are included to enable roll center correction for lowered vehicles. To further improve control arm operation over the OE design, these control arms use FK rod ends and high misalignment solid spherical bushings to get rid of binding and flex. Features: Lightweight Aluminum, Titanium, Chromoly and Stainless Steel construction Correct ball joint angle for full articulation Clamp design allows for easy access to lock down your alignment settings Low friction 3-piece Teflon lined FK spherical bushings and Heim joints/rod ends Multiple size stainless steel roll center spacers for precise adjustment

Show More Show Less

BMW F8X M2 M3 M4 Chassis Bracing

T#:4070463

Part#: F-BRACE

Ships in 1 Business Day

5% off MSRP $ 99.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.00 USD

Add to Wish List

Qty

5% off MSRP

$ 99.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.00 USD

Add to Wish List

BMW F8X M2 M3 M4 Chassis Bracing

The BMW F8X M2 M3 M4 Chassis Bracing is designed to enhance the rigidity and stability of the chassis, providing improved handling and performance for your BMW. Turner Motorsport offers this high-quality brace to support better driving dynamics and reduced flex during aggressive driving.

Benefits:

Enhanced Rigidity: Significantly increases chassis stiffness, leading to improved handling and reduced body roll.
Improved Stability: Minimizes chassis flex for more precise steering responses and better overall control.
High-Quality Construction: Made from durable materials to ensure long-lasting performance and reliability.
Easy Installation: Designed for straightforward installation with minimal modifications required.
Optimized Performance: Perfect for both street and track use, enhancing the driving experience and vehicle performance.

Show More Show Less

Turner Dual Mount Diff Plate - With Extra Rear Position ECS Poly Bush...

10X Entries Into Our F80 M3 Sweepstakes
Polyurethane bushings are needed for this kit!

T#:589796

Part#: 026773TMS04KT

In Stock

Sale - Save 25% $ 588.99

This product was last offered at the strikethrough price on
06-14-2026

$ 441.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 588.99

This product was last offered at the strikethrough price on
06-14-2026

$ 441.74 USD

Add to Wish List

Turner Dual Mount Diff Plate with an Extra ECS Rear Poly Bushing for the second subframe diff mount. ONLY FOR USE WITH EXISTING INSTALLED POLY BUSHINGS!

Turner Monoball Rear Upper Control Arm Bushings - F8x M2, M2 Comp, M3...

10X Entries Into Our F80 M3 Sweepstakes

T#:2104260

Part#: 006261LA01

In Stock

Sale - Save 10% $ 354.99

This product was last offered at the strikethrough price on
06-14-2026

$ 319.49 USD

Add to Wish List

Qty

Sale - Save 10%

$ 354.99

This product was last offered at the strikethrough price on
06-14-2026

$ 319.49 USD

Add to Wish List

BMW’s are known to have failure prone rear control arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the rear wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer F80, F82, F83, and F87 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered. We offer these control arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms. Features: Bearing housing Precision CNC machined from 6061-T6 blue anodized aluminum Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands. CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. Bearing OEM BMW sealed and greased ball joint for exceptional durability and service life. Performance Nearly instantaneous, crisp steering and braking response. Maintenance free, long lasting performance. Improved road feel without undesirable NVH.

Show More Show Less

Turner Motorsport - Performance Front Adjustable Swaybar End Link Set...

10X Entries Into Our F80 M3 Sweepstakes

T#:588019

Part#: 025990TMS06

In Stock

$ 331.99

This product was last offered at the strikethrough price on
06-14-2026

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

When lowering your BMW without changing your swaybar end links, a significant amount of preload is applied to the swaybar. This can negatively affect the handling characteristics of your vehicle and cause unwanted stress on a number of other suspension components. Luckily, this can easily be remedied with our very own Turner Performance Adjustable Swaybar End Links! These adjustable end links are designed specifically for your lowered BMW, featuring heat-treated chromoly studs, Teflon lined 1/2" solid bearings with 65 degrees of articulation, CNC machined 6061 and 2024 aluminum shafts, and high-grade hardware for unparalleled performance and reliability. These end links are made 100% in America from American sourced parts and materials!

Show More Show Less

BMW F87 M2 F23 F33 Carbon Fiber Corner Braces - Gloss

10X Entries Into Our F80 M3 Sweepstakes
Only For F23/F33 Convertibles, and F87 M2 (N55)

T#:589030

Part#: 028148TMS09KT

In Stock

Sale - Save 10% $ 822.99

This product was last offered at the strikethrough price on
06-14-2026

$ 740.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 822.99

This product was last offered at the strikethrough price on
06-14-2026

$ 740.69 USD

Add to Wish List

Upgrade your chassis' rigidity, and dress up your engine bay with beautiful glossy Carbon Fiber!

Turner Motorsport Performance Rear Upper Control Arms - F8X M2 M3 M4 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:637367

Part#: 025990TMS012

In Stock

$ 1,062.99

This product was last offered at the strikethrough price on
05-03-2026

$ 899.99 USD

Add to Wish List

Qty

$ 899.99 USD

Add to Wish List

Eliminate sloppy handling with Turner's adjustable performance control arms!

Turner Adjustable Toe Arms w/ Eccentric Lockout Plates - F80, F82, G8...

10X Entries Into Our F80 M3 Sweepstakes

T#:587754

Part#: 23672TMS03

In Stock

Starting at $ 432.99 USD

Add to Wish List

Starting at $ 432.99 USD

Add to Wish List

Eliminates any unwanted movement in the rear end associated with the the cumbersome factory eccentric toe adjustment point, opening up a wider range of adjustment for your alignment needs!

Turner Motorsport Performance Rear Sway Bar End Links - F8X M2 M3 M4 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:637368

Part#: 025990TMS011

In Stock

Sale - Save 3% $ 321.99

This product was last offered at the strikethrough price on
06-14-2026

$ 312.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 321.99

This product was last offered at the strikethrough price on
06-14-2026

$ 312.33 USD

Add to Wish List

Looking to get the most out of your swaybar? We suggest upgrading to our brand new Performance Rear End Links. Our new line of F8X rear end links feature length-adjustability for eliminating preload on sway bars, Teflon lined FK 1/2" bearings which prove higher load capacities than stock rubber bushings, and heat-treated Chromoly High Misalignment studs that offer extreme articulation, 65 degrees in total, to prevent binding.

Show More Show Less

Turner Motorsport - Performance Adjustable Rear Traction Links - BMW ...

10X Entries Into Our F80 M3 Sweepstakes

T#:5471050

Part#: 00501TMS08

In Stock

$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD

Limited Qty Sale

Add to Wish List

The stock Genuine BMW rear trailing arms (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Traction Links increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches. Thanks to their adjustable design, these allow fine tuning of rear bumpsteer and anti-squat characteristics. These arms are designed for use in high-performance street and race vehicles. These traction links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA

Show More Show Less

Turner Motosport - Performance Adjustable Rear Toe Links - BMW F8X M2...

10X Entries Into Our F80 M3 Sweepstakes

T#:5471051

Part#: 00501TMS09

In Stock

Sale - Save 5% $ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD

Add to Wish List

The stock Genuine BMW rear toe links (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Toe Links increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments. Even small changes to ride height and camber will effect toe settings, and the wide range of adjustment allows you to maximize grip on a track car and extend tire life on a street car. The factory rear toe arms utilize an eccentric bolt and washer for adjustment and lack precision and range. These toe links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. Best if tightened to 73.7 ft. lbs. (100 N/M). DO NOT OVERTORQUE! ECS is not liable for any issues due to overtorque. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA

Show More Show Less

2-Piece Rear Subframe Bushing - Rear Position (95A) - F8X G2X G8X ...

10X Entries Into Our F80 M3 Sweepstakes

T#:53326250

Part#: 056755LAKT

In Stock

$ 104.98

This product was last offered at the strikethrough price on
05-07-2026

$ 100.98 USD

Add to Wish List

Qty

$ 100.98 USD

Add to Wish List

Enhance rear-end control and put more power to the ground with a straightforward 3-piece design that installs with ease. The factory rubber may favor ride comfort, but it struggles to keep up when driving gets aggressive. As it wears, the OEM bushing can soften and deform, reducing stability and allowing wheel hop to creep in when you need traction most.

Our 95A durometer polyurethane bushings solve that problem. Engineered to strike the perfect balance between soft factory rubber and harsh solid mounts, they significantly reduce differential movement without introducing excessive vibration. The result is more efficient power transfer, so your torque goes straight to the rear wheels instead of being lost in drivetrain flex.

Features & Benefits:

Minimizes differential movement and instability to help eliminate wheel hop
Two-piece 95A split polyurethane design for easier installation
Precision-fit insert reinforces the bushing and strengthens mounting points
Resistant to road salt, oils, and harsh chemicals
Compatible with dual mount differential plates
Design:

Type II Anodized 6061-T6 CNC billet aluminum inserts for superior corrosion resistance and durability.
95A Polyurethane 2-Piece Isolator.
Product Development:

Our Rear Differential Bushings are designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Show More Show Less

Turner BMW Dual Mount Diff Plate - With Extra Rear Position OE Bushin...

10X Entries Into Our F80 M3 Sweepstakes

T#:589799

Part#: 26773TMS05KT

In Stock

Sale - Save 25% $ 624.99

This product was last offered at the strikethrough price on
06-14-2026

$ 468.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 624.99

This product was last offered at the strikethrough price on
06-14-2026

$ 468.74 USD

Add to Wish List

MMX Front Drop Links - F8x M2/M3/M4

T#:4565866

Part#: MMR24-1001

Ships in 2 Business Days

$ 283.99 USD

Add to Wish List

Qty

$ 283.99 USD

Add to Wish List

OEM end links were designed to compliment standard ride height but when this is changed the car will now be pulling your anti-roll bar ends up, pushing it out of its operating window, and forcing the link to sit at a sharper angle. MMR Performance adjustable drop links are an essential upgrade to any lowered or performance car. When you lower your BMW without changing out your swaybar end links, a significant amount of preload is applied to the swaybar. This can negatively affect the handling characteristics of your vehicle and cause unwanted stress on a number of other suspension components. Features: Made from T6061 Aluminum Anodized in signature MMR Dark Anthracite Heavy-duty ball joints to ensure a long life span

Show More Show Less

BMW F8X M3 M3 M4 Rear Suspension Link Kit

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:554937

Part#: D280-0015

Ships in 5 Business Days

11% off MSRP $ 1,181.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,049.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,181.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,049.99 USD

Add to Wish List

BMW F8X M3 M4 Rear Suspension Link Kit is designed to enhance the handling and stability of your high-performance BMW. This kit eliminates the vagueness and flex commonly associated with stock rear suspension links, which rely on rubber bushings that can flex under load. By replacing these with Teflon-coated, machined steel rod ends and billet aluminum rods, this kit ensures a more planted and secure feel, especially during hard acceleration, braking, and cornering. The rods feature a hex design for easy adjustments, making it an ideal upgrade for those running larger wheels and tires.

Improved Stability: Eliminates flex under acceleration, braking, and cornering for a more secure feel.
High-Quality Materials: Teflon-coated, machined steel rod ends and billet aluminum rods.
Adjustable Design: Hex machined center rods for easy adjustment.
Enhanced Handling: Reduces vagueness and provides a more planted driving experience.
Ideal for Upgrades: Recommended for use with larger wheels and tires.
Turner Motorsport Quality: Trusted performance parts backed by over 35 years of BMW tuning expertise.

Show More Show Less

Turner Motorsport Control Arm Monoball Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:2528148

Part#: 006261LA09

Back Ordered

Sale - Save 3% $ 2,028.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,968.12 USD

Add to Wish List

Qty

Sale - Save 3%

$ 2,028.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,968.12 USD

Add to Wish List

BMW’s are known to have failure prone rear control arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the rear wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer F80, F82, F83, and F87 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered. We offer these control arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms. Features: Bearing housing Precision CNC machined from 6061-T6 blue anodized aluminum Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands. CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. Bearing OEM BMW sealed and greased ball joint for exceptional durability and service life. Performance Nearly instantaneous, crisp steering and braking response. Maintenance free, long lasting performance. Improved road feel without undesirable NVH.

Show More Show Less

F80, F82, F83, F87 Dinan Monoball Front Thrust Arm Bushings (Pair) ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:396651

Part#: D280-0017

Ships in 5 Business Days

11% off MSRP $ 598.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 531.99 USD

Add to Wish List

Qty

11% off MSRP

$ 598.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 531.99 USD

Add to Wish List

For someone looking for superior performance and longevity these sealed monoball bushings are the best upper thrust bearing you can buy for an E82 1-series or E9X 3-series. The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. The condition worsens as the bushing wears out. The Dinan monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings.

Show More Show Less

Hotchkis - M3 Front & Rear Performance Sway Bar Kit With Turner Motor...

10X Entries Into Our F80 M3 Sweepstakes

T#:4154557

Part#: 22842KTKT

In Stock

$ 1,303.99

This product was last offered at the strikethrough price on
07-09-2026

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Hotchkis Front and Rear Sway Bars with Turner Motorsport Front and Rear Sway Bar End Links

Dinan - M3 Front & Rear Adjustable Sway Bar Set - F87 M2, F8X M3/M4 ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389134

Part#: D120-0605

Ships in 5 Business Days

11% off MSRP $ 1,068.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 949.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,068.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 949.99 USD

Add to Wish List

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the F8X M3/M4 and F87 M2 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front and rear bars are hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension.

Show More Show Less

IRP Performance Rear Lower Control Arm Bushing - Inner - 8x, E9x, F87...

The lowest arm housing the coil spring

T#:2408498

Part#: IRPRSB-9XMB2

Special Order: No Guaranteed ETA

$ 176.99 USD

Add to Wish List

Qty

$ 176.99 USD

Add to Wish List

Enhance road feel and keep your vehicle more planted with these upgraded aluminum bushings. Less play allows for more precise suspension articulation, making for a better performance driving experience.

Show More Show Less

IRP Rear Adjustable Lower Control Arms

T#:2423536

Part#: IRPLCA-FXMR

Ships on Nov 4, 2026

Starting at $ 349.00 USD

Add to Wish List

Starting at $ 349.00 USD

Add to Wish List

Featuring Fluro Bearings

Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Tapered Sea...

10X Entries Into Our F80 M3 Sweepstakes

T#:340476

Part#: TSU9980548

Ships on Jan 11, 2027

Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

Sale - Save 25%

$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Show More Show Less

Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Square Seat...

10X Entries Into Our F80 M3 Sweepstakes

T#:340477

Part#: TSU998062A

Ships on Jan 11, 2027

Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

Sale - Save 25%

$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Show More Show Less

Rod End Boot (14-18mm) - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:599632

Part#: RERS3

In Stock

Sale - Save 43% $ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Qty

Sale - Save 43%

$ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.

Show More Show Less

MMX Underbody Chassis Brace - F80, F82, F83, F87

T#:55713525

Part#: MMR13-1000

In Stock

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

The MMX Performance Underbody Chassis Brace is engineered specifically for the F8x platform to eliminate the unwanted flex that plagues the factory mid-section. On the track or your favorite backroad, flex alters your alignment mid-corner, reducing tire contact patch.

Show More Show Less

MMX Performance G8X / F8X Adjustable Toe Arm Set

T#:56363320

Part#: MMR55-1609

Ships in 3 Business Days

$ 495.00 USD

Add to Wish List

Qty

$ 495.00 USD

Add to Wish List

Engineered specifically for the BMW M2, M3, and M4, MMX Performance Adjustable Toe Arms replace flexing factory bushings with precision pillow ball rod ends. CNC machined from lightweight billet 6061-T6 aluminum, these arms lock in your alignment specs under cornering

Show More Show Less

MMX Performance G8X / F8X OEM Rear Camber Arm Bearing Set

T#:56363328

Part#: MMR55-1651

Ships in 3 Business Days

$ 210.99 USD

Add to Wish List

Qty

$ 210.99 USD

Add to Wish List

Eliminate suspension compliance and lock in your alignment settings with the MMX Performance Rear Camber Arm Spherical Bearing Set. The factory rubber bushings on the F8X/G8X platform introduce unwanted deflection under load, leading to shifts during hard cornering, braking, and power delivery.

Show More Show Less

MMR Performance Lowering Springs - F87 M2

T#:39768320

Part#: MMR08-1002

Ships in 3 Business Days

$ 332.99 USD

Add to Wish List

Qty

$ 332.99 USD

Add to Wish List

The MMR Performance lowering springs for BMW OG M2 and M2 Competition models deliver the perfect blend of improved dynamics and enhanced looks, yet without sacrificing ride quality. The 30-35mm drop in ride height brings the M-Car to life making it feel lighter, more direct and with significantly sharper turn-in. Finished in MMR metallic grey, our springs are developed to be fully compatible with cars fitted with either static or dynamic dampers. A must-fit for any BMW M2 F87. Features: A front drop of 30mm whilst the rear sits lower by 35mm. Fully compatible with cars fitted with either static or dynamic dampers. Perfect blend of improved dynamics and enhanced looks, yet without sacrificing ride quality. Specifically designed by us for the M2. Bespoke spring poundage for improved driving dynamics. Finished in MMR metallic grey.

Show More Show Less

MMX Performance G8X / F8X OEM Rear Toe/Traction Arm Bearing Set ...

T#:56363322

Part#: MMR55-1650

Ships in 3 Business Days

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

The MMX Performance Rear Toe/Traction Arm Bearing Set deletes that deflection, locking down your G8X or F8X chassis for pure, predictable cornering.

IRP Aluminum Rear Lower Camber Arms - Gold Finish - F87 M2, F8X M3 M4...

T#:4469705

Part#: IRPLCA-FXMAL

Ships in 6 Business Days

$ 518.99 USD

Add to Wish List

Qty

$ 518.99 USD

Add to Wish List

Looking to convert your M-car to a true coilover suspension in the rear? Then you'll want these camber arms! These control/camber arms replace the standard rear control arms that normally work with the barrel springs, eliminating a ton of extra weight and cleaning up the rear suspension. The simple design of these camber arms also allows for more room to work and increased clearance, setting you up perfectly for your rear coilover conversion! *Does not fit with original springs – coilovers must be used to install these arms!

Show More Show Less

IRP Rear Adjustable Upper Control Arms

T#:2423553

Part#: IRPUCA-FXMR

Ships on Nov 4, 2026

Starting at $ 349.00 USD

Add to Wish List

Starting at $ 349.00 USD

Add to Wish List

Featuring Fluro Bearings

MMX Height Adjustable Sport Spring Kit - BMW F8X M2 M2C M3 M4 ...

T#:9416048

Part#: MMR08-1005

Special Order: No Guaranteed ETA

$ 1,152.99 USD

Add to Wish List

Qty

$ 1,152.99 USD

Add to Wish List

Unlike conventional lowering springs, the MMR Height Adjustable Sport Spring kit for F8x M2, M2C, M3 and M4 gives you a fully customisable ride height adjustment. So however you want your car to sit, this Height Adjustable Spring kit allows you to infinitely fine tune heights front and rear until you reach your ideal stance. By retaining the OE dampers, whether fixed or adaptive, this solution costs much less than upgrading to coilovers does - yet with the reassurance of keeping your high quality, durable Adaptive M or static factory dampers in place. Best of both worlds, in other words. The method of adjustment is just the same as on a coilover suspension setup. Four adjustable perches fit underneath the Sport Springs. With a simple turn up or down on the threaded platform to change ride height, you can tailor it until reached your perfect height and rake. This generous sweep of adjustment provides a lowering range of 20-45mm on the front and 10-35mm at the rear (versus factory ride height). The Sport Springs themselves, finished in beautiful MMR Grey, are carefully developed progressive rate springs, with vehicle-specific rates carefully chosen to match with the damper characteristics of the factory suspension. It’s by specifying progressive rate Sport Springs that allows us to deliver the perfect blend of improved dynamics in hard driving, yet without sacrificing ride quality in normal us in the middle of the springs’ travel. Push-on through the corners and the F8x chassis really comes to life, making it feel lighter, more direct and with significantly sharper turn-in. The MMR Height Adjustable Sport Spring kit is a must-fit for any BMW F8x M-car!

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW F87 M2 N55 3.0L

Sub-Categories

BMW F8X M2 M3 M4 Chassis Bracing

Benefits:

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results