BMW Suspension Parts for BMW F87 M2 N55 3.0L

F8X Ohlins X Turner Motorsport Street-Performance Coilover System ...

10X Entries Into Our F80 M3 Sweepstakes

T#:8294107

Part#: BMU MW40S1

Ships on Sep 16, 2026

$ 3,977.99 USD

Add to Wish List

Qty

$ 3,977.99 USD

Add to Wish List

Turner Motorsport has teamed up with Ohlins to bring the ultimate street coilover to the F8X community. Working alongside the engineers at Ohlins, we have developed a special recipe derived from the standard Ohlins DFV Road and Track kit. This Street-Performance system includes modified spring rates and valving for a more streetable coilover experience. If you are looking to enjoy your S55 car to the fullest, but don't want to forgo any ride quality, these are the perfect option.

Show More Show Less

TC Kline Racing Double Adjustable Street/Track Coilover Kit - Race - ...

T#:1331977

Part#: TCKF8XSINGLEDBL2

Ships in 2 Business Days

$ 3,095.99 USD

Add to Wish List

Qty

$ 3,095.99 USD

Add to Wish List

This TC Kline Coilover kit features: Proprietary, single adjustable front and double adjustable rear Koni dampers Camber plates Recommended, track-proven spring rates: 400#F / 700#R Looking for different spring rates? Give us a call - we're happy to help. Designed and tested on the street and the track - TC Kline Racing Coilovers are found in hundreds of competition vehicles and daily-driven vehicles alike. Precisely-valved, rebound-adjustable, Koni shocks are matched with TC Kline's VVS high tensile alloy springs. TC Kline's VVS springs feature different free heights - designed to be interchangeable without having to reset ride height. This coilover system is built to meet the evolving demands you'll put on your car - adjustable camber, adjustable rebound, and replaceable springs (which are readily available) all allow to compensate for changes in driving habits, tire selection, track and road surfaces, and of course, a desire for a firmer or softer ride!

Show More Show Less

TC Kline Racing Double Adjustable Street/Track Coilover Kit - Street ...

T#:594691

Part#: TCKF8XSINGLEDBL

Ships in 6 Business Days

$ 3,095.99 USD

Add to Wish List

Qty

$ 3,095.99 USD

Add to Wish List

This TC Kline coilover kit features: Proprietary, single adjustable front and double adjustable rear Koni dampers Camber plates Recommended, track proven spring rates: 300#F/600#R Looking for different spring rates? Give us a call - we're happy to help. Designed and tested on the street and the track - TC Kline Racing Coilovers are found in hundreds of competition vehicles and daily-driven vehicles alike. Precisely-valved, rebound-adjustable, Koni shocks are matched with TC Kline's VVS high tensile alloy springs. TC Kline's VVS springs feature different free heights - designed to be interchangeable without having to reset ride height. This coilover system is built to meet the evolving demands you'll put on your car - adjustable camber, adjustable rebound, and replaceable springs (which are readily available) all allow to compensate for changes in driving habits, tire selection, track and road surfaces, and of course, a desire for a firmer or softer ride!

Show More Show Less

F87 M2 Dinan Coil Over Spring Kit

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389433

Part#: D190-8701

Ships in 5 Business Days

11% off MSRP $ 1,799.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,599.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,799.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,599.99 USD

Add to Wish List

Dinan Adjustable Spring Sets feature stiffer springs and an innovative perch system that allows the ride height to be fine-tuned even with stock shocks. Dinan Performance springs are slightly lower but stiffer for better handling and less body roll yet still remain comfortable for normal use. They have carefully engineered the springs to work within the rates of the stock shocks, providing unmatched handling, looks, and ride quality. Adjustable spring perches give you the ability to keep your stock shocks (even EDC) but lower the ride height and set the perfect stance. This is hugely beneficial when using larger wheels and tires where a standard spring drop will not give you the look you desire. Dinan coil over springs include a threaded collar that fits over the stock strut body in the front and an adjustable perch in the rear. New progressive bump stops are also included to maintain the proper shock travel. This kit is great for fine tuning your ride height while retaining the factory EDC system.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 3 points towards your Dinan badge.

This item fits the following BMWs:
2015+ F87 BMW M2

Show More Show Less

Turner Dual-Mount Differential Plate - With ECS Poly Diff Bushings - ...

10X Entries Into Our F80 M3 Sweepstakes

T#:589795

Part#: 026773TMS03KT

In Stock

Sale - Save 25% $ 1,019.99

This product was last offered at the strikethrough price on
06-14-2026

$ 764.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 1,019.99

This product was last offered at the strikethrough price on
06-14-2026

$ 764.99 USD

Add to Wish List

Allows for the addition of a second rear-position differential bushing, and allows for a more enhanced driving experience by removing unwanted movement. Engineered by Turner to withstand extreme driveline forces. Featuring ECS Poly Diff Bushing kit for maximum performance & handling.

Show More Show Less

Turner Motorsport Thrust Arm Monoball Upgrade - Pre-installed Arms - ...

10X Entries Into Our F80 M3 Sweepstakes

T#:401100

Part#: 023671TMS01-02

In Stock

Sale - Save 5% $ 840.99

This product was last offered at the strikethrough price on
06-14-2026

$ 798.94 USD

Add to Wish List

Qty

Sale - Save 5%

$ 840.99

This product was last offered at the strikethrough price on
06-14-2026

$ 798.94 USD

Add to Wish List

BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.

Show More Show Less

Turner Monoball Thrust Arm Bearing Set - F8x M2/M3/M4

10X Entries Into Our F80 M3 Sweepstakes

T#:397172

Part#: 023671TMS01

In Stock

Sale - Save 20% $ 464.99

This product was last offered at the strikethrough price on
06-13-2026

$ 371.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 464.99

This product was last offered at the strikethrough price on
06-13-2026

$ 371.99 USD

Add to Wish List

BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.

Show More Show Less

G8X / F8X Adjustable Toe Arm Set | Fall-Line Motorsports - Standard ...

T#:27938407

Part#: FLM-G8X-1FECOTOE

In Stock

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

G8X / F8X Adjustable Toe Arm Set | Fall-Line Motorsports - Standard by Turner Motorsport is crafted to enhance the alignment process for BMW enthusiasts. Made in the USA, this standard toe link kit facilitates rapid toe adjustments during alignment, and when combined with the tension strut, it also allows for precise track adjustments. Designed for easy fitment, these arms simplify wheel alignment and camber adjustment, making the setup process quicker and more efficient.

Enhanced Alignment: Enables fast and precise toe adjustments for improved wheel fitment.
Track Adjustment: Works in conjunction with the tension strut for overall track adjustments.
Simplified Setup: Eases camber adjustment and simplifies alignment processes.
Direct Replacement: Matches OEM part number 33322284534 // 33-32-2-284-534.
Multi-Link Suspension Compatibility: Handles dynamic changes in alignment settings effectively.

Fits:

G80 / G81 / G82 / G83 M3 & M4
F80 / F82 M3 & M4
G87 M2
F87 M2

Show More Show Less

Turner Performance Adjustable Front Lower Control Arms - F87 M2, F80 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:588022

Part#: 025990TMS03

In Stock

Sale - Save 3% $ 937.99

This product was last offered at the strikethrough price on
06-14-2026

$ 909.85 USD

Add to Wish List

Qty

Sale - Save 3%

$ 937.99

This product was last offered at the strikethrough price on
06-14-2026

$ 909.85 USD

Add to Wish List

Looking for upgraded lower control arms that don't limit adjustment capabilities like the OE control arms? These Turner Performance Lower Control Arms may be exactly what you need! These CNC'd billet aluminum control arms allow you to adjust roll center, camber, and track width easily and lock in your adjustments securely. The construction of these control arms allows for significant weight savings, reducing unsprung weight, while maintaining high levels of strength that is up to track use and abuse. Instead of using traditional jam nuts, these Turner Control Arms utilize a pinch bolt and rotating clamp design that allows high clamping forces to lock in track width and camper specifications without making it difficult to keep bearings properly aligned. Stainless steel spacers are included to enable roll center correction for lowered vehicles. To further improve control arm operation over the OE design, these control arms use FK rod ends and high misalignment solid spherical bushings to get rid of binding and flex. Features: Lightweight Aluminum, Titanium, Chromoly and Stainless Steel construction Correct ball joint angle for full articulation Clamp design allows for easy access to lock down your alignment settings Low friction 3-piece Teflon lined FK spherical bushings and Heim joints/rod ends Multiple size stainless steel roll center spacers for precise adjustment

Show More Show Less

Turner Dual Mount Diff Plate - With Extra Rear Position ECS Poly Bush...

10X Entries Into Our F80 M3 Sweepstakes
Polyurethane bushings are needed for this kit!

T#:589796

Part#: 026773TMS04KT

In Stock

Sale - Save 25% $ 588.99

This product was last offered at the strikethrough price on
06-14-2026

$ 441.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 588.99

This product was last offered at the strikethrough price on
06-14-2026

$ 441.74 USD

Add to Wish List

Turner Dual Mount Diff Plate with an Extra ECS Rear Poly Bushing for the second subframe diff mount. ONLY FOR USE WITH EXISTING INSTALLED POLY BUSHINGS!

Turner Monoball Rear Upper Control Arm Bushings - F8x M2, M2 Comp, M3...

10X Entries Into Our F80 M3 Sweepstakes

T#:2104260

Part#: 006261LA01

In Stock

Sale - Save 10% $ 354.99

This product was last offered at the strikethrough price on
06-14-2026

$ 319.49 USD

Add to Wish List

Qty

Sale - Save 10%

$ 354.99

This product was last offered at the strikethrough price on
06-14-2026

$ 319.49 USD

Add to Wish List

BMW’s are known to have failure prone rear control arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the rear wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer F80, F82, F83, and F87 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered. We offer these control arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms. Features: Bearing housing Precision CNC machined from 6061-T6 blue anodized aluminum Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands. CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. Bearing OEM BMW sealed and greased ball joint for exceptional durability and service life. Performance Nearly instantaneous, crisp steering and braking response. Maintenance free, long lasting performance. Improved road feel without undesirable NVH.

Show More Show Less

Turner Motorsport - Performance Front Adjustable Swaybar End Link Set...

10X Entries Into Our F80 M3 Sweepstakes

T#:588019

Part#: 025990TMS06

In Stock

$ 331.99

This product was last offered at the strikethrough price on
06-14-2026

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

When lowering your BMW without changing your swaybar end links, a significant amount of preload is applied to the swaybar. This can negatively affect the handling characteristics of your vehicle and cause unwanted stress on a number of other suspension components. Luckily, this can easily be remedied with our very own Turner Performance Adjustable Swaybar End Links! These adjustable end links are designed specifically for your lowered BMW, featuring heat-treated chromoly studs, Teflon lined 1/2" solid bearings with 65 degrees of articulation, CNC machined 6061 and 2024 aluminum shafts, and high-grade hardware for unparalleled performance and reliability. These end links are made 100% in America from American sourced parts and materials!

Show More Show Less

BMW F87 M2 F23 F33 Carbon Fiber Corner Braces - Gloss

10X Entries Into Our F80 M3 Sweepstakes
Only For F23/F33 Convertibles, and F87 M2 (N55)

T#:589030

Part#: 028148TMS09KT

In Stock

Sale - Save 10% $ 822.99

This product was last offered at the strikethrough price on
06-14-2026

$ 740.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 822.99

This product was last offered at the strikethrough price on
06-14-2026

$ 740.69 USD

Add to Wish List

Upgrade your chassis' rigidity, and dress up your engine bay with beautiful glossy Carbon Fiber!

Turner Motorsport Performance Rear Upper Control Arms - F8X M2 M3 M4 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:637367

Part#: 025990TMS012

In Stock

$ 1,062.99

This product was last offered at the strikethrough price on
05-03-2026

$ 899.99 USD

Add to Wish List

Qty

$ 899.99 USD

Add to Wish List

Eliminate sloppy handling with Turner's adjustable performance control arms!

Turner Adjustable Toe Arms w/ Eccentric Lockout Plates - F80, F82, G8...

10X Entries Into Our F80 M3 Sweepstakes

T#:587754

Part#: 23672TMS03

In Stock

Starting at $ 432.99 USD

Add to Wish List

Starting at $ 432.99 USD

Add to Wish List

Eliminates any unwanted movement in the rear end associated with the the cumbersome factory eccentric toe adjustment point, opening up a wider range of adjustment for your alignment needs!

Turner Motorsport Performance Rear Sway Bar End Links - F8X M2 M3 M4 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:637368

Part#: 025990TMS011

In Stock

Sale - Save 3% $ 321.99

This product was last offered at the strikethrough price on
06-14-2026

$ 312.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 321.99

This product was last offered at the strikethrough price on
06-14-2026

$ 312.33 USD

Add to Wish List

Looking to get the most out of your swaybar? We suggest upgrading to our brand new Performance Rear End Links. Our new line of F8X rear end links feature length-adjustability for eliminating preload on sway bars, Teflon lined FK 1/2" bearings which prove higher load capacities than stock rubber bushings, and heat-treated Chromoly High Misalignment studs that offer extreme articulation, 65 degrees in total, to prevent binding.

Show More Show Less

BMW F8X M2 M3 M4 Front Sway Bar End Link Kit

T#:5580987

Part#: FLM-F87-1BFLINK

Back Ordered

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

BMW F8X M2 M3 M4 Front Sway Bar End Link Kit is essential for achieving optimal corner balance and handling in your BMW. This kit allows for precise adjustments to ensure the sway bar remains properly aligned and stress-free at static ride height. Adjustable sway bar end links are crucial for maximizing mechanical grip and stability during cornering, braking, and acceleration. By ensuring even loading and eliminating any “zero load” points, this kit enhances chassis dynamics and delivers superior performance.

Improved Handling: Ensures the sway bar is completely unloaded and unstressed at static ride height for enhanced chassis dynamics.
Enhanced Corner Balance: Helps achieve an even distribution of weight across each tire, improving stability and grip.
Precision Adjustment: Allows for fine-tuning of the sway bar links to maintain proper alignment and prevent uneven loading.
Durable Protection: Dust boots seal the end links to prevent dust and debris from affecting performance.
Essential for Performance: Critical for those seeking the best handling and cornering performance from their BMW M car.

Show More Show Less

Turner Motorsport - Performance Adjustable Rear Traction Links - BMW ...

10X Entries Into Our F80 M3 Sweepstakes

T#:5471050

Part#: 00501TMS08

In Stock

$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD

Limited Qty Sale

Add to Wish List

The stock Genuine BMW rear trailing arms (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Traction Links increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches. Thanks to their adjustable design, these allow fine tuning of rear bumpsteer and anti-squat characteristics. These arms are designed for use in high-performance street and race vehicles. These traction links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA

Show More Show Less

Fall-Line Motorsports Lower Coil Over Camber Arm & Shim Set - G8X / F...

T#:20979735

Part#: F8X/E9X-1FLCOCA

Back Ordered

$ 995.00 USD

Add to Wish List

Qty

$ 995.00 USD

Add to Wish List

*NOTE: ONLY FOR CARS WITH TRUE REAR COIL OVER CONVERSION - NOT COMPATIBLE WITH STOCK REAR SPRINGS* Fall-Line Motorsports has taken everything they've learned in manufacturing over the last decade to create an ultra-high-end interpretation of the G8X / F8X M2 M3 M4 and E9X M3 lower camber arm. Fall-Line's bespoke version discards the deformation-prone stamped steel arm that includes a provision for the rear coil spring in favor of 5-axis CNC machined, billet aluminum that eliminates the rear coil mount. This pair has been gorgeously crafted and pocketed (to save weight without compromising rigidity) and is hard coat black anodized for ultimate resistance to wear. So too has the hardware been given an upgrade—10.9 grade corrosion-resistant extended bolts are included to replace the inferior factory pieces. These arms represent another exciting entry into the often neglected F8X / E9X suspension arm market and add valuable peace of mind for street or motorsport duty from the undisputed champion within the BMW realm. Product Details: For all G8X, F8X, and E9X M3 cars using TRUE Rear Coil Over Conversion ONLY DMG Mori 5-Axis CNC machined, billet aluminum construction Hard coat black anodized Includes Camber Shim Set Sold in pairs

Show More Show Less

Turner Motosport - Performance Adjustable Rear Toe Links - BMW F8X M2...

10X Entries Into Our F80 M3 Sweepstakes

T#:5471051

Part#: 00501TMS09

In Stock

Sale - Save 5% $ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD

Add to Wish List

The stock Genuine BMW rear toe links (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Toe Links increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments. Even small changes to ride height and camber will effect toe settings, and the wide range of adjustment allows you to maximize grip on a track car and extend tire life on a street car. The factory rear toe arms utilize an eccentric bolt and washer for adjustment and lack precision and range. These toe links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. Best if tightened to 73.7 ft. lbs. (100 N/M). DO NOT OVERTORQUE! ECS is not liable for any issues due to overtorque. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA

Show More Show Less

Fall-Line Motorsports G8X / F8X Rear Sway Bar End Link Kit - V2 ...

T#:28038192

Part#: FLM-F8X-G8X-1BRL

Ships in 1 Business Day

$ 198.00 USD

Add to Wish List

Qty

$ 198.00 USD

Add to Wish List

Lowering your car is often the first step in suspension tuning, but occasionally, this process can adversely affect other associated components. Unwanted sway bar pre-load may be one of these consequential effects, adding asymmetrical spring rate bias to one side of the car versus the other. This imbalance may affect your overall chassis dynamics and corner balance. For this reason, adjustable sway bar end links are critical—by adjusting each link with the car at operating weight, you can ensure the sway bar is completely unloaded at your determined ride height, restoring your chassis' balance and your confidence in all driving situations. Unlike all other link kits on the market that utilize the cheaper and simpler jam-nuts, Fall-Line utilizes OE tie-rod end style pinch-nut fasteners to ensure they never lose their set length. NOTE: Installed photos show V1 jam-nut style V2 Key Features: Now includes OE tie-rod end style pinch-nut fastener rod ends Eliminates the typical jam-nut rod ends that are known to move over time Designed for superior corner balancing Ensures equal weight distribution on each tire Compatible with height adjustable dampers Eliminates uneven cross-weights Prevents sway bar-induced suspension stress Allows for precise customization through length variation Includes dust boots to protect against dust interference Made in USA Sold as a pair

Show More Show Less

Fall-Line Motorsports G8X / F8X Rear Lower Control Arm Bearing Set - ...

T#:28038181

Part#: FLM-G8X-1BLCABO

Ships in 1 Business Day

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Experience championship-caliber performance with Fall-Line's Lower Control Arm Bearings, proudly Made in the USA. From years of competitive racing, Fall-Line is synonymous with producing top-tier suspension components that excel on the track. The weak link in the latest M Cars' rear camber arms is the rubber bushings, but Fall-Line's new lower control arm bearings offer a game-changing solution. This SKU replaces OEM BMW Part number: 33326792553 Key Features: Designed for all G8X and F8X M cars DMG Mori 5-Axis CNC machined for precision Full stainless bearing assembly including hats, bearings, housing, and spiral locks Sold in pairs; designed to replace the rear control/camber arm outer bearings (BMW Part Number: 33-32-6-792-553) By eliminating rubber from this critical feedback area, Fall-Line provides control over the tire's behavior and confidence behind the wheel at the limit. These bearings feature the largest FK spherical bearings on the market, ensuring strength and longevity even under competition-level loads. Stainless steel spiral locks offer 360 degrees of clamping force, securing the bearing from any potential movement. As a bonus, these spherical bearings outlast OEM rubber variants, eliminating the headache of repeated replacements over your ownership. Please note that, as with any elimination of suspension bushings, there may be a slight increase in noise, vibration, and harshness after installation. Upgrade your suspension with Fall-Line's Lower Control Arm Bearings and take your driving experience to the next level. Invest in championship-level performance with Fall-Line, the trusted name in motorsport.

Show More Show Less

Turner BMW Dual Mount Diff Plate - With Extra Rear Position OE Bushin...

10X Entries Into Our F80 M3 Sweepstakes

T#:589799

Part#: 26773TMS05KT

In Stock

Sale - Save 25% $ 624.99

This product was last offered at the strikethrough price on
06-14-2026

$ 468.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 624.99

This product was last offered at the strikethrough price on
06-14-2026

$ 468.74 USD

Add to Wish List

Fall-Line Motorsports Front Mono Ball Conversion Kit - F87 M2 ...

T#:598880

Part#: FLM-F87-1BUNI

Ships in 1 Business Day

$ 423.00 USD

Add to Wish List

Qty

$ 423.00 USD

Add to Wish List

Fall Line’s mono ball spherical bearing conversion kit transforms the front steering and suspension feel of the M2. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M2 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm. The bearing’s housing is precision machine from aluminum, to create a rigid part that allows for the M2’s thrust arm to move smoothly through its range of suspension travel. The improvement in steering and suspension feel is immediate and truly enhances the personality of the M2.

Show More Show Less

Rear Upper Control Arm Set - F8X

T#:5580939

Part#: FLM-F8XWUAK

In Stock

$ 1,040.00

This product was last offered at the strikethrough price on
05-19-2026

$ 990.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 1,040.00

This product was last offered at the strikethrough price on
05-19-2026

$ 990.99 USD

Limited Qty Sale

Add to Wish List

These upper wishbones boast two major benefits: replace the OEM rubber bushings with spherical units and add valuable adjustability versus the standard, fixed arm. The new adjustment capabilities allow ultra fine-tuning within the full-suspension suite—the more consistent suspension geometry, amongst other benefits, results in significantly improved performance and confidence in all driving conditions.

Show More Show Less

Fall-Line Motorsports G8x / F8x M2 / M3 / M4 Rear Upper Control Arm B...

T#:27938412

Part#: FLM-G8X-1BRUCA

Back Ordered

$ 385.00 USD

Add to Wish List

Qty

$ 385.00 USD

Add to Wish List

MADE IN THE USA. Rubber bushings found in the G8X’s rear upper arms are the last weak link in an otherwise rigid suspension. The original BMW bushings yield to cornering forces applied to the suspension, resulting in camber and toe change that is not ideal for performance driving. Fall Line’s kit replaces the soft upper control arm bushings with spherical bearings, enabling the rear suspension arms to move smoothly through their travel and giving the rear of a car a more solid, planted feel. The reduced geometry change allows for the car to retain its desired alignment, maintaining better control over the tire’s behavior under heavy load. Designed to replace the inner bushings of the rear upper control arms; BMW Part Numbers: 33322284777, 33329504611, and 33329504612. The BMW M cars feature a subframe that is directly mounted to the chassis by BMW M, to reduce suspension compliance and improve performance and driving feel. Similarly, the Fall Line upper control arm bearings rigidly mount the suspension arms to the subframe, increasing driver feedback, reducing geometry change, and improving performance. As with any elimination of suspension bushings, more feedback does equate to more road and suspension noise. While the Fall Line rear upper control arm bearings are a substantial performance improvement, please do be prepared for increased noise, vibration, and harshness after installing the parts. Product Details: DMG Mori 5-Axis CNC machined Full stainless bearing assembly (hats, bearing, housing, spiral locks) Price is per set of 4 (2 per side); designed to replace the inner bushings of the rear upper control arms (BMW Part Numbers: 33-32-2-284-777, 33-32-9-504-611, & 33-32-9-504-612)

Show More Show Less

BMW F8X M3 M3 M4 Rear Suspension Link Kit

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:554937

Part#: D280-0015

Ships in 5 Business Days

11% off MSRP $ 1,181.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,049.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,181.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,049.99 USD

Add to Wish List

BMW F8X M3 M4 Rear Suspension Link Kit is designed to enhance the handling and stability of your high-performance BMW. This kit eliminates the vagueness and flex commonly associated with stock rear suspension links, which rely on rubber bushings that can flex under load. By replacing these with Teflon-coated, machined steel rod ends and billet aluminum rods, this kit ensures a more planted and secure feel, especially during hard acceleration, braking, and cornering. The rods feature a hex design for easy adjustments, making it an ideal upgrade for those running larger wheels and tires.

Improved Stability: Eliminates flex under acceleration, braking, and cornering for a more secure feel.
High-Quality Materials: Teflon-coated, machined steel rod ends and billet aluminum rods.
Adjustable Design: Hex machined center rods for easy adjustment.
Enhanced Handling: Reduces vagueness and provides a more planted driving experience.
Ideal for Upgrades: Recommended for use with larger wheels and tires.
Turner Motorsport Quality: Trusted performance parts backed by over 35 years of BMW tuning expertise.

Show More Show Less

Turner Motorsport Control Arm Monoball Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:2528148

Part#: 006261LA09

Back Ordered

Sale - Save 3% $ 2,028.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,968.12 USD

Add to Wish List

Qty

Sale - Save 3%

$ 2,028.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,968.12 USD

Add to Wish List

BMW’s are known to have failure prone rear control arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the rear wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer F80, F82, F83, and F87 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered. We offer these control arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms. Features: Bearing housing Precision CNC machined from 6061-T6 blue anodized aluminum Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands. CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. Bearing OEM BMW sealed and greased ball joint for exceptional durability and service life. Performance Nearly instantaneous, crisp steering and braking response. Maintenance free, long lasting performance. Improved road feel without undesirable NVH.

Show More Show Less

F80, F82, F83, F87 Dinan Monoball Front Thrust Arm Bushings (Pair) ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:396651

Part#: D280-0017

Ships in 5 Business Days

11% off MSRP $ 598.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 531.99 USD

Add to Wish List

Qty

11% off MSRP

$ 598.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 531.99 USD

Add to Wish List

For someone looking for superior performance and longevity these sealed monoball bushings are the best upper thrust bearing you can buy for an E82 1-series or E9X 3-series. The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. The condition worsens as the bushing wears out. The Dinan monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings.

Show More Show Less

TC Kline Racing Camber Plates - BMW F87 M2 (Non-Comp)

For use with TC Kline Racing Coilovers Only - Replaces 6-Bolt Front Strut Mounts

T#:401221

Part#: TCKF87CP

Ships in 2 Business Days

$ 518.00 USD

Add to Wish List

Qty

$ 518.00 USD

Add to Wish List

Add camber to your BMW with TC Kline Racing's camber plates!

Fall-Line Motorsports F8X M2 / M3 / M4 Rear Upper Control Arm Set ...

T#:28038190

Part#: FLM-F8X-1FWUAK

In Stock

$ 1,040.00 USD

Add to Wish List

Qty

$ 1,040.00 USD

Add to Wish List

From years of competitive race experience, Fall-Line has become synonymous with producing not only championship caliber race cars, but the finest suspension components that help propel them to victory. As the final piece within Fall-Line’s suite of rear suspension offerings for the F8X M2 / M3 / M4, these upper wishbones boast two major benefits: replace the OEM rubber bushings with spherical units and add valuable adjustability versus the standard, fixed arm. The new adjustment capabilities allow ultra fine tuning within the full suspension suite—the more consistent suspension geometry, amongst other benefits, results in significantly improved performance and confidence in all driving conditions. These arms are direct replacements for BMW Part No. 33322284777. The F8X cars will notice an immediate difference due to its unique subframe and chassis relationship—torsional rigidity is further improved with the addition of these arms with only marginal increases in NVH. As an added benefit, the spherical bearings will outlast the OEM rubber variants, saving the headache of repeated replacement over your ownership. Product Details: Fits all F8X M2 / M3 / M4 Motorsport clamp-style fastener for faster, more reliable alignment adjustments Long-life FK spherical bearings Made in USA Replaces OEM BMW Part Numbers: 33-32-2-284-777

Show More Show Less

Fall-Line Motorsports G8X / F8X Rear Lower Tension / Fixed Toe Arm Se...

T#:27938408

Part#: FLM-G8X-1FRTAK

Ships in 3 Business Days

$ 679.99 USD

Add to Wish List

Qty

$ 679.99 USD

Add to Wish List

This item can function as the Rear Lower Tension Arm, as well as a Fixed Toe Arm. This SKU replaces OEM BMW Part number: 33322284534 Experience championship-level performance with Fall-Line Motorsports' precision-engineered suspension components. Crafted from aircraft-grade billet aluminum and finished with military-spec hard coat anodizing, these components are designed to elevate your driving experience to victory. Improved Handling and Durability Fall-Line's F8X / G8X lower tension arms and fixed toe arms are built to excel in motorsport conditions. Their CNC-machined, one-piece construction ensures both strength and longevity. Featuring the largest FK spherical bearings on the market, these arms eliminate rubber from critical areas, giving you ultimate control over your car's tire behavior and enhancing your confidence behind the wheel. Stainless steel spiral locks provide 360-degree clamping force for a secure fit under competition-level loads. Long-Lasting Performance Our spherical bearings outlast OEM rubber variants, sparing you the hassle of repeated replacements. While these suspension upgrades offer improved feedback and handling, they may result in a slight increase in noise, vibration, and harshness. Product Details: Compatible with all G8X and F8X M cars DMG Mori 5-Axis CNC machined 6061-T6 aluminum Full stainless bearing assembly (hats, bearing, housing, spiral locks) Sold in pairs; designed to replace rear trailing/tension arms (BMW Part Number: 33-32-2-284-534) MIL Spec hard coat clear anodizing Made in the USA Fixed toe arms retain factory Eccentric bolt adjustment

Show More Show Less

Dinan - M3 Front & Rear Adjustable Sway Bar Set - F87 M2, F8X M3/M4 ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389134

Part#: D120-0605

Ships in 5 Business Days

11% off MSRP $ 1,068.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 949.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,068.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 949.99 USD

Add to Wish List

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the F8X M3/M4 and F87 M2 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front and rear bars are hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension.

Show More Show Less

Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Tapered Sea...

10X Entries Into Our F80 M3 Sweepstakes

T#:340476

Part#: TSU9980548

Ships on Jan 11, 2027

Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

Sale - Save 25%

$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Show More Show Less

Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Square Seat...

10X Entries Into Our F80 M3 Sweepstakes

T#:340477

Part#: TSU998062A

Ships on Jan 11, 2027

Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

Sale - Save 25%

$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Show More Show Less

Bav Auto Shock and Strut Nut Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580394

Part#: B8800081

In Stock

Sale - Save 5% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Used to install or remove shock and strut nuts - no more using an impact gun!

Bav Auto Trailing Arm Inner Bushing Tool - Master Set

10X Entries Into Our F80 M3 Sweepstakes
Be sure to add some grease to the rods in this tool set during installation to prevent breakage.

T#:580442

Part#: B8800137

In Stock

Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Qty

Sale - Save 3%

$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW F87 M2 N55 3.0L

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results