BMW Sway Bar Kits for BMW F87 M2 N55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

The next step in tuning your car's handling - after shocks/springs and camber plates - should be a set of swaybars. Using larger front and rear sway bars will give your car better/quicker turn-in and less bodyroll in corners. These bars replace the existing sway bars on the car for a clean and simple upgrade with very little downside. Sway bars should be matched with your springs/shocks to maintain a proper handling balance. In some cases only a front or rear bar is needed to positively change the balance and make the car more neutral. We sell sway bar kits from H&R, Racing Dynamics, OE BMW upgrades, and even some of our own designs. Swaybars are sold with new bushings. New links and other hardware are strongly recommended.

Sub-Categories

Sort By:

Fall Line - Corporate Logo
T#:5580987
Part#: FLM-F87-1BFLINK
Back Ordered
$ 219.99 USD
Free Shipping
$ 219.99 USD
Free Shipping

BMW F8X M2 M3 M4 Front Sway Bar End Link Kit is essential for achieving optimal corner balance and handling in your BMW. This kit allows for precise adjustments to ensure the sway bar remains properly aligned and stress-free at static ride height. Adjustable sway bar end links are crucial for maximizing mechanical grip and stability during cornering, braking, and acceleration. By ensuring even loading and eliminating any “zero load” points, this kit enhances chassis dynamics and delivers superior performance.

  • Improved Handling: Ensures the sway bar is completely unloaded and unstressed at static ride height for enhanced chassis dynamics.
  • Enhanced Corner Balance: Helps achieve an even distribution of weight across each tire, improving stability and grip.
  • Precision Adjustment: Allows for fine-tuning of the sway bar links to maintain proper alignment and prevent uneven loading.
  • Durable Protection: Dust boots seal the end links to prevent dust and debris from affecting performance.
  • Essential for Performance: Critical for those seeking the best handling and cornering performance from their BMW M car.
Show More Show Less
Fall Line - Corporate Logo
T#:28038192
Part#: FLM-F8X-G8X-1BRL
Ships in 1 Business Day
$ 198.00 USD
Free Shipping
$ 198.00 USD
Free Shipping
Lowering your car is often the first step in suspension tuning, but occasionally, this process can adversely affect other associated components. Unwanted sway bar pre-load may be one of these consequential effects, adding asymmetrical spring rate bias to one side of the car versus the other. This imbalance may affect your overall chassis dynamics and corner balance. For this reason, adjustable sway bar end links are critical—by adjusting each link with the car at operating weight, you can ensure the sway bar is completely unloaded at your determined ride height, restoring your chassis' balance and your confidence in all driving situations. Unlike all other link kits on the market that utilize the cheaper and simpler jam-nuts, Fall-Line utilizes OE tie-rod end style pinch-nut fasteners to ensure they never lose their set length. NOTE: Installed photos show V1 jam-nut style V2 Key Features: Now includes OE tie-rod end style pinch-nut fastener rod ends Eliminates the typical jam-nut rod ends that are known to move over time Designed for superior corner balancing Ensures equal weight distribution on each tire Compatible with height adjustable dampers Eliminates uneven cross-weights Prevents sway bar-induced suspension stress Allows for precise customization through length variation Includes dust boots to protect against dust interference Made in USA Sold as a pair
Show More Show Less
MMX Performance - Corporate Logo
T#:4565866
Part#: MMR24-1001
Ships in 2 Business Days
$ 283.99 USD
Free Shipping
$ 283.99 USD
Free Shipping
OEM end links were designed to compliment standard ride height but when this is changed the car will now be pulling your anti-roll bar ends up, pushing it out of its operating window, and forcing the link to sit at a sharper angle. MMR Performance adjustable drop links are an essential upgrade to any lowered or performance car. When you lower your BMW without changing out your swaybar end links, a significant amount of preload is applied to the swaybar. This can negatively affect the handling characteristics of your vehicle and cause unwanted stress on a number of other suspension components. Features: Made from T6061 Aluminum Anodized in signature MMR Dark Anthracite Heavy-duty ball joints to ensure a long life span
Show More Show Less

Whiteline - Corporate Logo
T#:39329338
Part#: BBR44Z
Ships in 3 Business Days
$ 264.99 USD
$ 264.99 USD
Engineered to 'Activate More Grip', sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline sway bar increases grip, increased grip equals better handling, and better handling equals better outright performance. It's the best dollar-for-dollar handling improvement you can make to your vehicle. Benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Show More Show Less

AFE - Corporate Logo
T#:384468
Part#: 440-503001FN
Ships in 3 Business Days
$ 410.00 USD
$ 410.00 USD
The aFe Control Front Sway Bar is a great upgrade option for your high performance BMW. Its tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bending and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish makes this bar very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 sway bushing brackets that are anodized black and polyurethane bushings.
Show More Show Less
AFE - Corporate Logo
T#:825812
Part#: 442-502001-L
Ships in 2 Business Days
$ 522.00 USD
Free Shipping
$ 522.00 USD
Free Shipping
Improve handling and eliminate sway bar preload with aFe Control’s adjustable end links. Sway bar preload is a scenario where your sway bar is in tension when your car is at rest. Sway bar preload affect’s how the vehicle handles making it stiffer when turning one direction versus the other. Factors like lowering springs can end up with uneven suspension heights which can lead to sway bar preload. If you have adjustable coilovers and are corner balancing the vehicle, it is especially important to zero out your sway bar preload to get consistent handling. Made with high-quality Aurora rod ends and precision machined adjusters, these end links will make short work of dialing in your suspension. Joint articulation was designed to exceed factory range which prevents binding during operation. Equipped with right-hand and left-hand rod ends, the end links can be adjusted on-car without removal. Whether you’re setting your car up for the street or track, aFe Control will get you there! Billet Aluminum Adjusters: aFe's adjusters are CNC machined out of 6061-T6 aluminum and anodized blue with laser etched logo. Quality Rod Ends: For superior quality and reliability, aFe uses PTFE-lined Aurora rod ends. Emissions Disclaimer: This product does not require a CARB EO#.
Show More Show Less

AFE - Corporate Logo
T#:384467
Part#: 440-503001-N
Back Ordered
$ 719.00 USD
$ 719.00 USD
The aFe Control Sway Bar Set is a great upgrade option for your high performance BMW. Its front and rear tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bent bars and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish make these bars very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 sway bushing brackets that are anodized black and polyurethane bushings.
Show More Show Less
AFE - Corporate Logo
T#:825814
Part#: 442-502001FL
Ships in 2 Business Days
$ 285.00 USD
Free Shipping on orders $49 and up
Improve handling and eliminate sway bar preload with aFe Control’s adjustable end links. Sway bar preload is a scenario where your sway bar is in tension when your car is at rest. Sway bar preload affect’s how the vehicle handles making it stiffer when turning one direction versus the other. Factors like lowering springs can end up with uneven suspension heights which can lead to sway bar preload. If you have adjustable coilovers and are corner balancing the vehicle, it is especially important to zero out your sway bar preload to get consistent handling. Made with high-quality Aurora rod ends and precision machined adjusters, these end links will make short work of dialing in your suspension. Joint articulation was designed to exceed factory range which prevents binding during operation. Equipped with right-hand and left-hand rod ends, the end links can be adjusted on-car without removal. Whether you’re setting your car up for the street or track, aFe Control will get you there! Billet Aluminum Adjusters: aFe's adjusters are CNC machined out of 6061-T6 aluminum and anodized blue with laser etched logo. Quality Rod Ends: For superior quality and reliability, aFe uses PTFE-lined Aurora rod ends. Emissions Disclaimer: This product does not require a CARB EO#.
Show More Show Less

Hawk - Corporate Logo
T#:31357393
Part#: HB765U.664KT
Ships on Sep 28, 2026
$ 598.99 USD
Free Shipping on orders $49 and up

BMW F8X F2X F3X Front And Rear Racing Brake Pad Kit - DTC-70 offers exceptional braking performance for track enthusiasts and racing professionals. Designed by Hawk Performance, these brake pads feature an advanced compound that excels in high-torque and high-temperature environments, making them ideal for aggressive driving and high-speed applications.

  • High Torque and Temperature Resistance: The DTC-70 compound delivers superior stopping power under extreme conditions.
  • Track-Ready Performance: Optimized for high-speed braking with or without downforce, enhancing your driving experience on the track.
  • Recommended Pairing: Ideal for use with DTC-60 pads for a balanced split friction between front and rear axles.
  • Consult the Hawk Brake Pad Compounds Graph: For guidance on selecting the appropriate pad for your needs, whether for track or street use.

Turner Motorsport provides this high-performance upgrade, ensuring reliability and top-notch performance on the racetrack.

Show More Show Less

AFE - Corporate Logo
T#:825813
Part#: 442-502001RL
Ships in 2 Business Days
$ 257.00 USD
Free Shipping on orders $49 and up
Improve handling and eliminate sway bar preload with aFe Control’s adjustable end links. Sway bar preload is a scenario where your sway bar is in tension when your car is at rest. Sway bar preload affect’s how the vehicle handles making it stiffer when turning one direction versus the other. Factors like lowering springs can end up with uneven suspension heights which can lead to sway bar preload. If you have adjustable coilovers and are corner balancing the vehicle, it is especially important to zero out your sway bar preload to get consistent handling. Made with high-quality Aurora rod ends and precision machined adjusters, these end links will make short work of dialing in your suspension. Joint articulation was designed to exceed factory range which prevents binding during operation. Equipped with right-hand and left-hand rod ends, the end links can be adjusted on-car without removal. Whether you’re setting your car up for the street or track, aFe Control will get you there! Billet Aluminum Adjusters: aFe's adjusters are CNC machined out of 6061-T6 aluminum and anodized blue with laser etched logo. Quality Rod Ends: For superior quality and reliability, aFe uses PTFE-lined Aurora rod ends. Emissions Disclaimer: This product does not require a CARB EO#.
Show More Show Less
AFE - Corporate Logo
T#:384469
Part#: 440-503001RN
Ships in 3 Business Days
$ 410.00 USD
$ 410.00 USD
The aFe Control Rear Sway Bar is a great upgrade option for your high performance BMW. Its tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bending and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish makes this bar very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 sway bushing brackets that are anodized black and polyurethane bushings.
Show More Show Less