Home
Engine Parts
Drive Belts, Pulleys, Tensioners

BMW Drive Belts & V-Belts for BMW F87 M2 N55 3.0L

Your BMW's drive belts are wear items, and will degrade and crack over time. Don't wait until you have a belt failure... don't get stranded! Replacing your BMW's belts, such as the alternator belt, power steering belt, air conditioning AC belt, or serpentine belt is a low cost insurance policy to preventing a break down -- or worse, engine damage. We recommend checking your belts every 10,000 miles. If your belts have excessive cracks, dry rot, missing teeth and/or grooves, are cause noise, it's time for new ones.

While also inspecting your serpentine belts, also check for wear or resistance in the pulleys. The tensioner pulley and deflection pulley are the primary sources for belt squealing. The rubber-isolated pulleys can also break apart, leading to total belt failure. We sell the tensioner and deflection pulleys for the M50 engine family used in the E34, E36, E39, E46, X5, Z3, and Z4.

Sub-Categories

Sort By:

OEM Accessory Belt Service Kit - F3X F22/23 N55 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:587391

Part#: 11287628661ABKT

In Stock

$ 171.99

This product was last offered at the strikethrough price on
06-09-2026

$ 153.99 USD

Add to Wish List

Qty

$ 153.99 USD

Add to Wish List

This kit includes the basic components recommended to replace when it comes time to swap out your accessory belt.

OEM INA Deflection Pulley - N55 3.0L, S55 3.0L

We Price Match - Give Us A Call or Chat!

T#:554453

Part#: 11288673720

In Stock

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Pulleys begin to squeak once they are reaching the end of their life span and if not replaced, can seize up and lead to a long host of problems that would leave you stranded on the side of the road.

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

N55 "Bulletproof" Crank Hub & Serpentine Kit - BMW F22/23 F3X N55 3.0...

10X Entries Into Our F80 M3 Sweepstakes

T#:1241398

Part#: TMSF30N55BPKT

Back Ordered

Sale - Save 4% $ 520.99

This product was last offered at the strikethrough price on
05-03-2026

$ 499.06 USD

Add to Wish List

Qty

Sale - Save 4%

$ 520.99

This product was last offered at the strikethrough price on
05-03-2026

$ 499.06 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate ECS Kevlar reinforced accessory belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter

Project Cars

SELECT YOUR BMW

BMW Drive Belts & V-Belts for BMW F87 M2 N55 3.0L

Sub-Categories

OEM Accessory Belt Service Kit - F3X F22/23 N55 3.0L

OEM INA Deflection Pulley - N55 3.0L, S55 3.0L

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

N55 "Bulletproof" Crank Hub & Serpentine Kit - BMW F22/23 F3X N55 3.0...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results